We want to declaratively specify users and organisations, so let's add
another module option "organisations", which allows us to specify users,
groups and of course organisations.
The implementation of this is not yet done and this is just to feed the
boilerplate.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Using just the host for the common name *and* for listening on the port
is quite a bad idea if you want to listen on something like :: or an
internal IP address which is proxied/tunneled to the outside.
Hence this separates host and fqdn.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
The server starts up without that option anyway, but it complains about
its value not being set. As we probably want to have access to that
configuration value anyway, let's expose this via the NixOS module as
well.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Now the service starts up if only the services.taskserver.enable option
is set to true.
We now also have three systemd services (started in this order):
* taskserver-init: For creating the necessary data directory and also
includes a refecence to the configuration file in
the Nix store.
* taskserver-ca: Only enabled if none of the server.key, server.cert,
server.crl and caCert options are set, so we can
allow for certificates that are issued by another
CA.
This service creates a new CA key+certificate and a
server key+certificate and signs the latter using
the CA key.
The permissions of these keys/certs are set quite
strictly to allow only the root user to sign
certificates.
* taskserver: The main Taskserver service which just starts taskd.
We now also log to stdout and thus to the journal.
Of course, there are still a few problems left to solve, for instance:
* The CA currently only signs the server certificates, so it's
only usable for clients if the server doesn't validate client certs
(which is kinda pointless).
* Using "taskd <command>" is currently still a bit awkward to use, so
we need to properly wrap it in environment.systemPackages to set the
dataDir by default.
* There are still a few configuration options left to include, for
example the "trust" option.
* We might want to introduce an extraConfig option.
* It might be useful to allow for declarative configuration of
organisations and users, especially when it comes to creating client
certificates.
* The right signal has to be sent for the taskserver service to reload
properly.
* Currently the CA and server certificates are created using
server.host as the common name and doesn't set additional certificate
information. This could be improved by adding options that explicitly
set that information.
As for the config file, we might need to patch taskd to allow for
setting not only --data but also a --cfgfile, which then omits the
${dataDir}/config file. We can still use the "include" directive from
the file specified using --cfgfile in order to chainload
${dataDir}/config.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
The descriptions for the options previously seem to be from the
taskdrc(5) manual page. So in cases where they didn't make sense for us
I changed the wording a bit (for example for client.deny we don't have a
"comma-separated list".
Also, I've reordered things a bit for consistency (type, default,
example and then description) and add missing types, examples and
docbook tags.
Options that are not used by default now have a null value, so that we
can generate a configuration file out of all the options defined for the
module.
The dataDir default value is now /var/lib/taskserver, because it doesn't
make sense to put just yet another empty subdirectory in it and "data"
doesn't quite make sense anyway, because it also contains the
configuration file as well.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
We're aiming for a proper integration into systemd/journald, so we
really don't want zillions of separate log files flying around in our
system.
Same as with the pidFile. The latter is only needed for taskdctl, which
is a SysV-style initscript and all of its functionality plus a lot more
is handled by systemd already.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
The service doesn't start with the "taskd" user being present, so we
really should add it. And while at it, it really makes sense to add a
default group as well.
I'm using a check for the user/group name as well, to allow the
taskserver to be run as an existing user.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This patch makes dbus launch with any user session instead of
leaving it up to the desktop environment launch script to run it.
It has been tested with KDE, which simply uses the running daemon
instead of launching its own.
This is upstream's recommended way to run dbus.
- services.iodined moved to services.iodine
- configuration file backwards compatable
- old iodine server configuration moved to services.iodine.server
- attribute set services.iodine.clients added to specify any number
of iodine clients
- example:
iodine.clients.home = { server = "iodinesubdomain.yourserver.com"; ... };
- client services names iodine-name where name would be home
Previously, the cisco resolver was used on the theory that it would
provide the best user experience regardless of location. The downsides
of cisco are 1) logging; 2) missing supoprt for DNS security extensions.
The new upstream resolver is located in Holland, supports DNS security,
and *claims* to not log activity. For users outside of Europe, this will
mean reduced performance, but I believe it's a worthy tradeoff.
When iodined tries to start before any interface other than loopback has an ip, iodined fails.
Wait for ip-up.target
The above is because of the following:
in iodined's code: src/common.c line 157
the flag AI_ADDRCONFIG is passed as a flag to getaddrinfo.
Iodine uses the function
get_addr(char *host,
int port,
int addr_family,
int flags,
struct sockaddr_storage *out);
to get address information via getaddrinfo().
Within get_addr, the flag AI_ADDRCONFIG is forced.
What this flag does, is cause getaddrinfo to return
"Name or service not known" as an error explicitly if no ip
has been assigned to the computer.
see getaddrinfo(3)
Wait for an ip before starting iodined.
* the major change is to set TARGETDIR=${vardir}, and symlink from
${vardir} back to ${out} instead of the other way around. this
gives CP more liberty to write to more directories -- in particular
it seems to want to write some configuration files outside of conf?
* run.conf does not need 'export'
* minor tweaks to CrashPlanDesktop.patch
GnuPG 2.1.x changed the way the gpg-agent works, and that new approach no
longer requires (or even supports) the "start everything as a child of the
agent" scheme we've implemented in NixOS for older versions.
To configure the gpg-agent for your X session, add the following code to
~/.xsession or some other appropriate place that's sourced at start-up:
gpg-connect-agent /bye
GPG_TTY=$(tty)
export GPG_TTY
If you want to use gpg-agent for SSH, too, also add the settings
unset SSH_AGENT_PID
export SSH_AUTH_SOCK="${HOME}/.gnupg/S.gpg-agent.ssh"
and make sure that
enable-ssh-support
is included in your ~/.gnupg/gpg-agent.conf.
The gpg-agent(1) man page has more details about this subject, i.e. in the
"EXAMPLES" section.
This patch fixes https://github.com/NixOS/nixpkgs/issues/12927.
It would be great to configure good rate-limiting defaults for this via
/proc/sys/net/ipv4/icmp_ratelimit and /proc/sys/net/ipv6/icmp/ratelimit,
too, but I didn't since I don't know what a "good default" would be.
Some users may wish to improve their privacy by using per-query
key pairs, which makes it more difficult for upstream resolvers to
track users across IP addresses.
- fix `enable` option description
using `mkEnableOption longDescription` is incorrect; override
`description` instead
- additional details for proper usage of the service, including
an example of the recommended configuration
- clarify `localAddress` option description
- clarify `localPort` option description
- clarify `customResolver` option description
This commit implements the changes necessary to start up a graphite carbon Cache
with twisted and start the corresponding graphiteWeb service.
Dependencies need to be included via python buildEnv to include all recursive
implicit dependencies.
Additionally cairo is a requirement of graphiteWeb and pycairo is not a standard
python package (buildPythonPackage) and therefore cannot be included via
buildEnv. It also needs cairo in the Library PATH.
Accidentally broken by 4fede53c09
("nixos manuals: bring back package references").
Without this fix, grafana won't start:
$ systemctl status grafana
...
systemd[1]: Starting Grafana Service Daemon...
systemd[1]: Started Grafana Service Daemon.
grafana[666]: 2016/03/06 19:57:32 [log.go:75 Fatal()] [E] Failed to detect generated css or javascript files in static root (%!s(MISSING)), have you executed default grunt task?
systemd[1]: grafana.service: Main process exited, code=exited, status=1/FAILURE
systemd[1]: grafana.service: Unit entered failed state.
systemd[1]: grafana.service: Failed with result 'exit-code'.
Broken by 17389e256f.
The description attributes of mkOption are parsed by XSLT, so we can
create a DocBook manual out of it.
Unfortunately, the passwordHash option had a description which includes
a <password> placeholder which is recognized by DocBook XSL as a valid
start tag. So as there is obviously no </password>, the build of the
manual bailed out with a parsing error.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Reported-by: devhell <"^"@regexmail.net>
In NixOS/nixpkgs@da6bc44 @thoughtpolice
made the Transmission NixOS module override the umask setting in the
Transmission config. This commit removes that override.
I want a different umask setting and I guess it is possible that other
people might want it to. Thus I think it is a good idea to respect the
umask settings in the Transmission config.
Add ability to do a more traditional bspwm startup (using the bspwm-session
script provided by nixpkgs.bspwm) as an alternative to directly starting
sxhkd & bspwm
Also added the ability to specify a custom startup script, instead of
relying on the provided bspwm-session
add '-f 100' as an argument to sxhkd to keep it from flooding bspwm
add SXHKD_SHELL=/bin/sh to help default to a faster shell than what may
be set in $SHELL (example: with zsh)
- Enforce that an option declaration has a "defaultText" if and only if the
type of the option derives from "package", "packageSet" or "nixpkgsConfig"
and if a "default" attribute is defined.
- Enforce that the value of the "example" attribute is wrapped with "literalExample"
if the type of the option derives from "package", "packageSet" or "nixpkgsConfig".
- Warn if a "defaultText" is defined in an option declaration if the type of
the option does not derive from "package", "packageSet" or "nixpkgsConfig".
- Warn if no "type" is defined in an option declaration.
Updates gitlab to the current stable version and fixes a lot of features that
were broken, at least with the current version and our configuration.
Quite a lot of sweat and tears has gone into testing nearly all features and
reading/patching the Gitlab source as we're about to deploy gitlab for our
whole company.
Things to note:
* The gitlab config is now written as a nix attribute set and will be
converted to JSON. Gitlab uses YAML but JSON is a subset of YAML.
The `extraConfig` opition is also an attribute set that will be merged
with the default config. This way *all* Gitlab options are supported.
* Some paths like uploads and configs are hardcoded in rails (at least
after my study of the Gitlab source). This is why they are linked from
the Gitlab root to /run/gitlab and then linked to the configurable
`statePath`.
* Backup & restore should work out of the box from another Gitlab instance.
* gitlab-git-http-server has been replaced by gitlab-workhorse upstream.
Push & pull over HTTPS works perfectly. Communication to gitlab is done
over unix sockets. An HTTP server is required to proxy requests to
gitlab-workhorse over another unix socket at
`/run/gitlab/gitlab-workhorse.socket`.
* The user & group running gitlab are now configurable. These can even be
changed for live instances.
* The initial email address & password of the root user can be configured.
Fixes#8598.
NetworkManager needs an additional avahi-user to use link-local
IPv4 (and probably IPv6) addresses. avahi-autoipd also needs to be
patched to the right path.
