This is an implementation of wireguard support using wg-quick config
generation.
This seems preferrable to the existing wireguard support because
it handles many more routing and resolvconf edge cases than the
current wireguard support.
It also includes work-arounds to make key files work.
This has one quirk:
We need to set reverse path checking in the firewall to false because
it interferes with the way wg-quick sets up its routing.
Get these from upstream tox-node package instead.
This is likely to cause less maintenance overhead over time and
following upstream bootstrap node changes is automated.
Same problem as described in acbadcdbba.
When using multiple interfaces for wifi with `networking.wlanInterfaces`
and the interface for `hostapd` contains a dash, this will fail as
systemd escapes dashes in its device names.
The manpage claims that the "limit" in the setting::
<name>:[<limit>:]<regex>
is optional and defaults to zero, implying no limit.
However, tests confirmed that it actually isn't optional.
Without limit, the setting ``any:.*`` places
outbound jobs on infinite hold if no particular
modem was specified on the sendfax command line.
The new default value ``any:0:.*`` from
this commit uses any available modem to
send jobs if not modem was given to sendfax.
Before this change, only passwords not containing shell metacharacters could be
used, and because the password was passed as a command-line argument, local
users could (in a very small window of time) record the password and (in an
indefinity window of time) record the length of the password.
We also use the opportunity to add a call to `exec` in the systemd start
script, so that no shell needs to hang around waiting for iodine to stop.
Compatibility with other distributions/software and expectation
of users coming from other systems should have higher priority over consistency.
In particular this fixes#51375, where the NetworkManager-wait-online.service
broke as a result of this.
Systemd provides some functionality to escape strings that are supposed
to be part of a unit name[1]. This seems to be used for interface names
in `sys-subsystem-net-devices-{interface}.device` and breaks
wpa_supplicant if the wireless interface name has a dash which is
encoded to \x2d.
Such an interface name is rather rare, but used i.e. when configuring
multiple wireless interfaces with `networking.wlanInterfaces`[2] to have on
interface for `wpa_supplicant` and another one for `hostapd`.
[1] https://www.freedesktop.org/software/systemd/man/systemd-escape.html
[2] https://nixos.org/nixos/options.html#networking.wlaninterfaces
Add an ExecReload command to the prosody service, to allow reloading
prosody by sending SIGHUP to the main process, for example to update
certificates without restarting the server. This is exactly how the
`prosodyctl` tool does it.
Note: Currently there is a bug which prevents mod_http from reloading the
certificates properly: https://issues.prosody.im/1216.
Without this line, attempting to copy and paste non-ASCII characters
will result in error messages like the following (and pasting from the
server to the client will not work):
```
CLIPBOARD clipboard_send_data_response_for_text: 823 : ERROR: clipboard_send_data_response_for_text: bad string
```
While at it (see previous commit), using attrNames in combination with
length is a bit verbose for checking whether the filtered attribute set
is empty, so let's just compare it against an empty attribute set.
Signed-off-by: aszlig <aszlig@nix.build>
When generating values for the services.nsd.zones attribute using values
from pkgs, we'll run into an infinite recursion because the nsd module
has a condition on the top-level definition of nixpkgs.config.
While it would work to push the definition a few levels down, it will
still only work if we don't use bind tools for generating zones.
As far as I could see, Python support for BIND seems to be only needed
for the dnssec-* tools, so instead of using nixpkgs.config, we now
directly override pkgs.bind instead of globally in nixpkgs.
To illustrate the problem with a small test case, instantiating the
following Nix expression from the nixpkgs source root will cause the
mentioned infinite recursion:
(import ./nixos {
configuration = { lib, pkgs, ... }: {
services.nsd.enable = true;
services.nsd.zones = import (pkgs.writeText "foo.nix" ''
{ "foo.".data = "xyz";
"foo.".dnssec = true;
}
'');
};
}).vm
With this change, generating zones via import-from-derivation is now
possible again.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @pngwjpgh
This flag causes the shairport-sync server to attempt to daemonize, but it looks like systemd is already handling that. With the `-d` argument, shairport-sync immediately exits—it seems that something (systemd I'm guessing?) is sending it SIGINT or SIGTERM.
The [upstream systemd unit](https://github.com/mikebrady/shairport-sync/blob/master/scripts/shairport-sync.service.in#L10) doesn't pass `-d`.
As the comment notes, restarts/exits of dhcpcd generally require
restarting the NTP service since, if name resolution fails for a pool of
servers, the service might break itself. To be on the safe side, try
restarting Chrony in these instances, too.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Setting the server list to be empty is useful e.g. for hardware-only
or virtualized reference clocks that are passed through to the system
directly. In this case, initstepslew has no effect, so don't emit it.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
* Added license: GPLv2.
* Updated homepage and description.
* CFLAGS are no longer necessary as of version 2.2.0.
* Option '-a ::' is no longer necessary as of version 2.2.0.
Removes the old UI build tooling; it is no longer necessary
because as of 1.2.0 it's bundled into the server binary.
It doesn't even need to have JS built, because it's bundled into
the release commit's source tree (see #48714).
The UI is enabled by default, so the NixOS service is
updated to directly use `ui = webUi;` now.
Fixes#48714.
Fixes#44192.
Fixes#41243.
Fixes#35602.
Signed-off-by: Niklas Hambüchen <mail@nh2.me>
Setting this variable in the environment of systemd-timedated allows
'timedatectl' to tell if an NTP service is running.
Closes#48917.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
The changes were found by executing the following in the strongswan
repo (https://github.com/strongswan/strongswan):
git diff 5.6.3..5.7.1 src/swanctl/swanctl.opt
This was overlooked on a rebase of mine on master, when I didn't realize
that in the time of me writing the znc changes this new option got
introduced.
This breaks with networking backends enabled and
also creates large delays on boot when some services depends
on the network target. It is also not really required
because tinc does create those interfaces itself.
fixes#27070
* nat/bind/dhcp.service:
Remove. Those services have nothing to do with a link-level service.
* sys-subsystem-net-devices-${if}.device:
Add as BindsTo dependency as this will make hostapd stop when the
device is unplugged.
* network-link-${if}.service:
Add hostapd as dependency for this service via requiredBy clause,
so that the network link is only considered to be established
only after hostapd has started.
* network.target:
Remove this from wantedBy clause as this is already implied from
dependencies stacked above hostapd. And if it's not implied than
starting hostapd is not required for this particular network
configuration.
This option represents the ZNC configuration as a Nix value. It will be
converted to a syntactically valid file. This provides:
- Flexibility: Any ZNC option can be used
- Modularity: These values can be set from any NixOS module and will be
merged correctly
- Overridability: Default values can be overridden
Also done:
Remove unused/unneeded options, mkRemovedOptionModule unfortunately doesn't work
inside submodules (yet). The options userName and modulePackages were never used
to begin with
Several service definitions used `mkEnableOption` with text starting
with "Whether to", which produced funny option descriptions like
"Whether to enable Whether to run the rspamd daemon..".
This commit corrects this, and adds short descriptions of services
to affected service definitions.
Most importantly, this sets PrivateTmp, ProtectHome, and ProtectSystem
so that Chrony flaws are mitigated, should they occur.
Moving to ProtectSystem=full however, requires moving the chrony key
files under /var/lib/chrony -- which should be fine, anyway.
This also ensures ConditionCapability=CAP_SYS_TIME is set, ensuring
that chronyd will only be launched in an environment where such a
capability can be granted.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
This commit adds the following
* the uucp user
* options for HylaFAX server to control startup and modems
* systemd services for HylaFAX server processes
including faxgettys for modems
* systemd services to maintain the HylaFAX spool area,
including cleanup with faxcron and faxqclean
* default configuration for all server processes
for a minimal working configuration
Some notes:
* HylaFAX configuration cannot be initialized with faxsetup
(as it would be common on other Linux distributions).
The hylafaxplus package contains a template spool area.
* Modems are controlled by faxgetty.
Send-only configuration (modems controlled by faxq)
is not supported by this configuration setup.
* To enable the service, one or more modems must be defined with
config.services.hylafax.modems .
* Sending mail *should* work:
HylaFAX will use whatever is in
config.services.mail.sendmailSetuidWrapper.program
unless overridden with the sendmailPath option.
* The admin has to create a hosts.hfaxd file somewhere
(e.g. in /etc) before enabling HylaFAX.
This file controls access to the server (see hosts.hfaxd(5) ).
Sadly, HylaFAX does not permit account-based access
control as is accepts connections via TCP only.
* Active fax polling should work; I can't test it.
* Passive fax polling is not supported by HylaFAX.
* Pager transmissions (with sendpage) are disabled by default.
I have never tested or used these.
* Incoming data/voice/"extern"al calls
won't be handled by default.
I have never tested or used these.
This allows one to add rules which change a packet's routing table:
iptables -t raw -I PREROUTING 1 -m set --match-set myset src -j MARK --set-mark 2
ip rule add fwmark 2 table 1 priority 1000
ip route add default dev wg0 table 1
to the beginning of raw table PREROUTING chain, and still have rpfilter.
This allows the user to add `wpa_supplicant` config options not yet supported by Nix without having to write the entire `wpa_supplicant.conf` file manually.
First change is to override the nm-dispatcher systemd service so that
it puts coreutils (wc/env/...) and iproute in PATH.
Second change is to make sure userscripts have the execute bit.
This reverts a change applied in PR #18491. When interfaces are
configured by DHCP (typical in a cloud environment), ordering after
network.target cause trouble to applications expecting some network to
be present on boot (for example, cloud-init is quite brittle when
network hasn't been configured for `cloud-init.service`) and on
shutdown (for example, collectd needs to flush metrics on shutdown).
When ordering after network.target, we ensure applications relying on
network.target won't have any network reachability on boot and
potentially on shutdown.
Therefore, I think ordering before network.target is better.
`ocserv` is a VPN server which follows the openconnect protocol
(https://github.com/openconnect/protocol). The packaging is slightly
inspired by the AUR version
(https://aur.archlinux.org/packages/ocserv/).
This patch initializes the package written in C, the man pages and a
module for a simple systemd unit to run the VPN server. The package
supports the following authentication methods for the server:
* `plain` (mostly username/password)
* `pam`
The third method (`radius`) is currently not supported since `nixpkgs`
misses a packaged client.
The module can be used like this:
``` nix
{
services.ocserv = {
enable = true;
config = ''
...
'';
};
}
```
The option `services.ocserv.config` is required on purpose to
ensure that nobody just enables the service and experiences unexpected
side-effects on the system. For a full reference, please refer to the
man pages, the online docs or the example value.
The docs recommend to simply use `nobody` as user, so no extra user has
been added to the internal user list. Instead a configuration like
this can be used:
```
run-as-user = nobody
run-as-group = nogroup
```
/cc @tenten8401
Fixes#42594
This reverts commit 095fe5b43d.
Pointless renames considered harmful. All they do is force people to
spend extra work updating their configs for no benefit, and hindering
the ability to switch between unstable and stable versions of NixOS.
Like, what was the value of having the "nixos." there? I mean, by
definition anything in a NixOS module has something to do with NixOS...
Having socket-activated epmd means that there always be only a single
instance managed centrally. Because Erlang also starts it
automatically if not available, and in worst case scenario 'epmd' can
be started by some Erlang application running under systemd. And then
restarting this application unit will cause complete loss of names in
'epmd' (if other Erlang system are also installed on this host).
E.g. see at which lengths RabbitMQ goes to recover from such
situations:
7741b37b1e/src/rabbit_epmd_monitor.erl (L36)
Having the only one socket-activated epmd completely solves this
problem.
This allows non-privileged users to configure local DNS
entries by editing hosts files read by NetworkManager's dnsmasq
instance.
Cherry-picked from e6c3d5a507909c4e0c0a5013040684cce89c35ce and
5a566004a2b12c3d91bf0acdb704f1b40770c28f.
The deep merge caused all the options to be unset when generating docs, unless quagga was enabled.
Using imports, instead, properly allows the documentation to be generated.
Rather than special-casing the dns options in networkmanager.nix, use
the module system to let unbound and systemd-resolved contribute to
the newtorkmanager config.
Commit 401370287a introduced a small error
where the closing tag of <literal/> was an opening tag instead.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @basvandijk, @xeji
Peviously only the timesyncd systemd unit was disabled. This meant
that when you activate a system that has chronyd enabled the following
strange startup behaviour takes place:
systemd[1]: Starting chrony NTP daemon...
systemd[1]: Stopping Network Time Synchronization...
systemd[1]: Stopped chrony NTP daemon.
systemd[1]: Starting Network Time Synchronization...
[x] Support transparent proxying. This means services behind sslh (Apache, sshd and so on) will see the external IP and ports as if the external world connected directly to them.
[x] Run sslh daemon as unprivileged user instead of root (it is not only for security, transparent proxying requires it)
[x] Removed pidFile support (it is not compatible with running sslh daemon as unprivileged user)
[x] listenAddress default changed from "config.networking.hostName" (which resolves to meaningless "127.0.0.1" as with current /etc/hosts production) to "0.0.0.0" (all addresses)
BIND doesn't allow the options section (or any section I'd guess) to be
defined more than once, so whenever you want to set an additional option
you're stuck using weird hacks like this:
services.bind.forwarders = lib.mkForce [ "}; empty-zones-enable no; #" ];
This basically exploits the fact that values coming from the module
options aren't escaped and thus works in a similar vain to how SQL
injection works.
Another option would be to just set configFile to a file that includes
all the options, including zones. That obviously makes the configuration
way less extensible and more awkward to use with the module system.
To make sure this change does work correctly I added a small test just
for that. The test could use some improvements, but better to have a
test rather than none at all. For a future improvement the test could be
merged with the NSD test, because both use the same zone file format.
This change has been reviewed in #40053 and after not getting any
opposition, I'm hereby adding this to master.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @peti, @edolstra
Closes: #40053
Wireguard is now split into two pretty much independent packages:
`wireguard` (Linux-specific kernel module) and `wireguard-tools`,
which is cross-platform.
* networking/stubby.nix: implementing systemd service module for stubby
This change implements stubby, the DNS-over-TLS stub resolver daemon.
The motivation for this change was the desire to use stubby's
DNS-over-TLS funcitonality in tandem with unbound, which requires
passing certain configuration parameters. This module implements those
config parameters by exposing them for use in configuration.nix.
* networking/stubby.nix: merging back module list
re-merging the module list to remove unecessary changes.
* networking/stubby.nix: removing unecessary capabilities flag
This change removes the unecessary flag for toggling the capabilities
which allows the daemon to bind to low ports.
* networking/stubby.nix: adding debug level logging bool
Adding the option to turn on debug logging.
* networking/stubby.nix: clarifying idleTimeout and adding systemd target
Improving docs to note that idleTimeout is expressed in ms. Adding the
nss-lookup `before' target to the systemd service definition.
* networking/stubby.nix: Restrict options with types.enum
This change restricts fallbackProtocol and authenticationMode to accept
only valid options instead of any list or str types (respectively). This
change also fixes typo in the CapabilityBoundingSet systemd setting.
* networking/stubby.nix: cleaning up documentation
Cleaning up docs, adding literal tags to settings, and removing
whitespace.
* networking/stubby.nix: fixing missing linebreak in comments
* networking/stubby.nix: cleaning errant comments
after seeing
`adjtime failed: Invalid argument` in my syslog, I tried using
`ntpd -s` but it would trigger
`/etc/ntpd.conf: No such file or directory`
see https://github.com/NixOS/nixpkgs/issues/31885
Instead of running the daemon with a specific config file, use the
standard file so that user are able to use the ntp executable without
having to look for the current config file.
Tracking scripts in particular, cannot be included in extraOpts, because script declaration has to be above script usage in keepalived.conf.
Changes are fully backward compatible.
When trying to run NSD to serve the root zone, one gets the following
error message:
error: illegal name: '.'
This is because the name of the zone is used as the derivation name for
building the zone file. However, Nix doesn't allow derivation names
starting with a period.
So whenever the zone is "." now, the file name generated is "root"
instead of ".".
I also added an assertion that makes sure the user sets
services.nsd.rootServer, otherwise NSD will fail at runtime because it
prevents serving the root zone without an explicit compile-time option.
Tested this by adding a root zone to the "nsd" NixOS VM test.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @hrdinka, @qknight
