- Replace hand-rolled version of nixos-install in make-disk-image by an
actual call to nixos-install
- Required a few cleanups of nixos-install
- nixos-install invokes an activation script which the hand-rolled version
in make-disk-image did not do. We remove /etc/machine-id as that's
a host-specific, impure, output of the activation script
Testing:
nix-build '<nixpkgs/nixos/release.nix>' -A tests.installer.simple passes
Also tried generating an image with:
nix-build -E 'let
pkgs = import <nixpkgs> {};
lib = pkgs.lib;
nixos = import <nixpkgs/nixos> {
configuration = {
fileSystems."/".device = "/dev/disk/by-label/nixos";
boot.loader.grub.devices = [ "/dev/sda" ];
boot.loader.grub.extraEntries = '"''"'
menuentry "Ubuntu" {
insmod ext2
search --set=root --label ubuntu
configfile /boot/grub/grub.cfg
}
'"''"';
};
};
in import <nixpkgs/nixos/lib/make-disk-image.nix> {
inherit pkgs lib;
config = nixos.config;
diskSize = 2000;
partitioned = false;
installBootLoader = false;
}'
Then installed the image:
$ sudo df if=./result/nixos.img of=/dev/sdaX bs=1M
$ sudo resize2fs /dev/disk/by-label/nixos
$ sudo mount /dev/disk/by-label/nixos /mnt
$ sudo mount --rbind /proc /mnt/proc
$ sudo mount --rbind /dev /mnt/dev
$ sudo chroot /mnt /nix/var/nix/profiles/system/bin/switch-to-configuration boot
[ … optionally do something about passwords … ]
and successfully rebooted to that image.
Was doing all this from inside a Ubuntu VM with a single user nix install.
The tests need to expand passed variable and very carefully.
I could see no other easy way than to change single-quoting in
makeWrapper to double-quoting.
The tests now fail with the same problem as on master...
Regression introduced by d84741a4bf.
The mentioned commit actually is a good thing, because we now get the
output from the X session.
Unfortunately, for the i3wm test, the i3-config-wizard prints out the
raw keyboard symbols directly coming from xcb, so the output isn't
necessarily proper UTF-8.
As the XML::Writer already expects valid UTF-8 input, we assume that
everything that comes into sanitise() will be UTF-8 from the start. So
we just decode() it using FB_DEFAULT as the check argument so that
every invalid character is replaced by the unicode replacement
character:
https://en.wikipedia.org/wiki/Specials_(Unicode_block)#Replacement_character
We simply re-oncode it again afterwards and return it, so we should
always get out valid UTF-8 in the log XML.
For more information about FB_DEFAULT and FB_CROAK, have a look at:
http://search.cpan.org/~dankogai/Encode-2.84/Encode.pm#Handling_Malformed_Data
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
We now generate a qcow2 image to prevent hitting Hydra's output size
limit. Also updated /root/user-data -> /etc/ec2-metadata/user-data.
http://hydra.nixos.org/build/33843133
Previously this was done in three derivations (one to build the raw
disk image, one to convert to OVA, one to add a hydra-build-products
file). Now it's done in one step to reduce the amount of copying
to/from S3. In particular, not uploading the raw disk image prevents
us from hitting hydra-queue-runner's size limit of 2 GiB.
- Enforce that an option declaration has a "defaultText" if and only if the
type of the option derives from "package", "packageSet" or "nixpkgsConfig"
and if a "default" attribute is defined.
- Enforce that the value of the "example" attribute is wrapped with "literalExample"
if the type of the option derives from "package", "packageSet" or "nixpkgsConfig".
- Warn if a "defaultText" is defined in an option declaration if the type of
the option does not derive from "package", "packageSet" or "nixpkgsConfig".
- Warn if no "type" is defined in an option declaration.
This prevents seeing lots of warnings about missing hashes/sizes in the
database when running "nix-store --verify --check-contents" for the
first time.
The EBS and S3 (instance-store) AMIs are now created from the same
image. HVM instance-store AMIs are also generated.
Disk image generation has been factored out into a function
(nixos/lib/make-disk-image.nix) that can be used to build other kinds
of images.
The resulting image can be copied to a SD card with `dd` and is directly
bootable by a suitably configured U-Boot. Though depending on the board, some
extra steps are required for copying U-Boot itself to the SD card.
Inside the image is a partition table, with a FAT32 /boot and a normal
writable EXT4 rootfs. It's possible to directly reuse the SD image's
partition layout and "install" NixOS on the same SD card by replacing
the default configuration.nix and nixos-rebuild, and actually is the
preferred way to use these images. To assist in this installation
method, the boot scripts on the image automatically resize the rootfs
partition to fit the SD card on the first boot.
The SD images come in two flavors; one for the ARMv6 Raspberry Pi,
and one multiplatform image for all the boards supported by the
mainline kernel's multi_v7_defconfig config target. At the moment, these
have been tested on:
- Raspberry Pi Model B (512MB model)
- NVIDIA Jetson TK1
- Linksprite pcDuino3 Nano
To build, run:
nix-build '<nixpkgs/nixos>' -A config.system.build.sdImage \
-I nixos-config='<nixpkgs/nixos/modules/installer/cd-dvd/sd-image-armv7l-multiplatform.nix>'
Only include the English language for the VM tests, because we most
likely won't need other languages. At least for now.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
By default this is now enabled, and it has to be explicitely enabled
using "enableOCR = true". If it is set to false, any usage of
getScreenText or waitForText will fail with an error suggesting to pass
enableOCR.
This should get rid of the rather large dependency on tesseract which
we don't need for most tests.
Note, that I'm using system("type -P") here to check whether tesseract
is in PATH. I know it's a bashism but we already have other bashisms
within the test scripts and we also run it with bash, so IMHO it's not a
problem here.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
As promised in the previous commit, this can be used similarly to
$machine->waitForWindow, where you supply a regular expression and it's
retrying OCR until the regexp matches.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Basically, this creates a screenshot and throws tesseract at it to
recognize the characters from the screenshot. In order to produce a
result that is well enough, we're using lanczos scaling and scale the
image up to 400% of its original size.
This provides the base functionality for a new Machine method which will
be called waitForText. I originally had that idea long ago when writing
the VM tests for VirtualBox and Chromium, but thought it would be
disproportionate to the case.
The downside however is that VM tests now depend on tesseract, but given
the average runtime of our tests it really shouldn't have a too big
impact and it's only a runtime dependency after all.
Another issue is that the OCR process takes quite some time to finish,
but IMHO it's better (as in more deterministic) than to rely on sleep().
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This changes the bootloader for iso generation from Grub to
syslinux. In addition this adds USB booting support, so that
"dd" can be used to burn the generated ISO to USB thumbdrives
instead of needing applications like UnetBootin.
