Update physlock to a more current version which supports PAM and
systemd-logind. Amongst others, this should work now with the slim
login manager without any additional configuration, because it does
not rely on the utmp mechanism anymore.
The section was strange to read, as the initial example already used
`listOf' which is mentioned in the very first paragraph. Then you read
in a subsection about `listOf' and the exact same example is given
once again.
This file was removed in 6f0b538044, but sufficient care was not taken
to remove all references to it. Without this change, trying to
rebuild nixos fails.
I realize that advanced users like to configure services with Nix
attrsets, but I don't think we should remove the option to use the
(configuration) language provided by upstream.
When keys get refreshed a folder with the permissions of the root user
get created in the home directory of the user dnscrypt-wrapper. This
prevents the service from restarting.
In addition to that the parameters of dnscrypt-wrapper have
changed in upstream and in the newly packaged software.
Grub configs include the NixOS version and date they were built, now
systemd can have fun too:
version Generation 99 NixOS 17.03.1700.51a83266d1, Linux Kernel 4.9.43, Built on 2017-08-30
version Generation 100 NixOS 17.03.1700.51a83266d1, Linux Kernel 4.9.43, Built on 2017-08-30
version Generation 101 NixOS 17.03.1700.51a83266d1, Linux Kernel 4.9.43, Built on 2017-08-31
version Generation 102 NixOS 17.03.1700.51a83266d1, Linux Kernel 4.9.43, Built on 2017-09-01
version Generation 103 NixOS 17.03.1700.51a83266d1, Linux Kernel 4.9.43, Built on 2017-09-02
version Generation 104 NixOS 17.09beta41.1b8c7786ee, Linux Kernel 4.9.46, Built on 2017-09-02
version Generation 105 NixOS 17.09.git.1b8c778, Linux Kernel 4.9.46, Built on 2017-09-02
I missed this in 799435b7ca.
This time I used "git grep -F pythonPackages.deluge" just to be sure :-)
Thanks a lot to @roconnor for spotting this.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Reported-by: @roconnor
The latest release of libyamlcpp in nixpkgs does not build because it
uses an older version of boost than the one in nixpkgs and therefore
expects a particular header file which does not exist in the latest
boost anymore. For this reason, a later (git) version of libyamlcpp is
used here (which actually doesn't even require boost).
The substituteInPlace in the prePatch phase is needed because libevdev
places its headers in non-standard places, meaning Nix cannot normally
find them. The `cut` command removes the first two "-I" characters from
the output of `pkg-config`. This needs to be in the prePatch phase
because otherwise Nix will patch these lines to `/var/empty`, meaning
you would have less specific replacement (in case other lines are also
patched to `/var/empty`).
I wrote the patch. (I believe it is NixOS specific.)
Regression introduced by fa5e343242.
The deluge package no longer resides in pythonPackages but now is a
top-level package.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @grantwwu, @fpletz
previous mkDefault did not work as expected,
as it did not overwrite the original submodule's defaults when the user
did not specify any custom options at all.
if the nginx option is used.
Noted that either webServerUser or nginx option is mandatory.
Also introduce an assertion if both are not set,
and a warning if both are set.
Resolves#27704.
instead of redeclaring part of the options. Backward-compatible change.
This gives the same flexibility to the user as nginx itself.
This also resolves the piwik module break from nginx' enableSSL introduction from #27426.
Previously, if proxy_set_header would be used in an extraConfig of
a location, the headers defined in the http block by
recommendedProxySettings would be cleared. As this is not the intended
behaviour, these settings are now included from a separate file if
needed.
This version should have more conventional regexes that work across many
platforms and regex engines. This is an issue because up until Nix 1.11,
Nix called out to the libc regex matcher, which behaved differently on
Darwin and Linux. And in Nix 1.12, we're moving to std::regex which will
also behave differently here.
And yes, I do actually evaluate make-disk-image.nix on Darwin ;)
Additional CUPS drivers can be added via "services.printing.drivers" but
Gutenprint was an exception. It was possible to add a Gutenprint
derivation to that list and it would work at first but unlike the other
drivers Gutenprint requires a script to be run after each update or any
attempt to print something would simply fail and an error would show up
in the jobs queue (http://localhost:631/jobs/):
"The PPD version (5.2.11) is not compatible with Gutenprint 5.2.13.
Please run
`/nix/store/7762kpyhfkcgmr3q81v1bbyy0bjhym80-gutenprint-5.2.13/sbin/cups-genppdupdate'
as administrator."
This is due to state in "/var/lib/cups/ppd" and one would need to run
"/nix/store/.../bin/cups-genppdupdate -p /var/lib/cups/ppd" manually.
The alternative was to enable the following option:
"services.printing.gutenprint" but this had two disadvantages:
1) It is an exception that one could be unaware of or that could
potentially cause some confusion.
2) One couldn't use a customized Gutenprint derivation in
"services.printing.drivers" but would instead have to overwrite
"pkgs.gutenprint".
This new approach simply detects a Gutenprint derivation in
"services.printing.gutenprint" by checking if the meta set of a
derivation contains "isGutenprint = true". Therefore no special
exception for Gutenprint would be required and it could easily be
applied to other drivers if they would require such a script to be run.
This is a squash commit of the joint work from:
* Jan Tojnar (@jtojnar)
* Linus Heckemann (@lheckemann)
* Ryan Mulligan (@ryantm)
* romildo (@romildo)
* Tom Hunger (@teh)
* nixos/usbguard: create package and module
No usbguard module or package existed for NixOS previously. USBGuard
will protect you from BadUSB attacks. (assuming configuration is done
correctly)
* nixos/usbguard: remove extra packages
Users can override this by themselves.
* nixos/usbguard: add maintainer and fix style
Regression introduced by 520a43ced3.
Using XML tag characters for things that are not tags needs to be
properly indicated by an entity.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
There was no documentation for the "config" option, and it wasn't quite
clear whether it was supposed to be a file, a string, or what. This
commit removes that ambiguity.
The installer tests are failing after 505e94256e
due to `nixos-rebuild switch` in the installed system trying to build
stdenvNoCC.
Seems that previously, stdenvNoCC wasn't in the installed
system either, but all the direct dependencies for the build were
(I don't really understand why, for that matter), so the building
actually went fine and everything worked.
But now gcc is also a direct build dependency due to allowedRequisites
containing gcc (even though it doesn't become a runtime dependency)
which doesn't get to the installed system.
All in all, let's ensure stdenvNoCC actually gets to the installed
system. It's after all necessary in almost any NixOS config build.
Before this commit default relay configuration could produce unexpected
real life consequences. This patch makes those choices explicit and
documents them extensively.
* modules sks and pgpkeyserver-lite:
runs the sks keyserver with optional nginx proxy for webgui.
* Add calbrecht to maintainers
* module sks: fix default hkpAddress value
* module pgpkeyserver-lite: make hkpAddress a string type option
and use (builtins.head services.sks.hkpAddress) as default value
* module sks: remove leftover service dependencies
`cfg.interactiveShellInit` is used by modules like
`programs.zsh.oh-my-zsh`. This means that all aliases defined in
`programs.zsh.shellAliases` might be overriden which is highly
unpredictable
Also removes configText, functionality is now provided more conveniently by configOptions.
Keep in mind that this breaks compatibility with previous configurations,
configFile provides a means to protect the CI token from being written into the nix store.
"Builder called die: Cannot wrap
/nix/store/XXX-munin-available-plugins/plugin.sh because it is not an
executable file"
[Bjørn: Keep DRY, quote "$file".]
This commit readds and updates the 1.x package from 1.1.4 to 1.1.6 which
also includes the needed command for migrating to 2.x
The module is adjusted to the version change, defaulting to radicale2 if
stateVersion >= 17.09 and radicale1 otherwise. It also now uses
ExecStart instead of the script service attribute. Some missing dots at
the end of sentences were also added.
I added a paragraph in the release notes on how to update to a newer
version.
Couple of changes:
- move home to /var/lib/ddclient so we can enable ProtectSystem=full
- do not stick binary into systemPackages as it will only run as a daemon
- run as dedicated user/group
- document why we cannot run as type=forking (output is swallowed)
- secure things by running with ProtectSystem and PrivateTmp
- .pid file goes into /run/ddclient
- let nix create the home directory instead of handling it manually
- make the interval configurable
* nixos/tor: add hiddenServices option
This change allows to configure hidden services more conveniently.
* nixos/tor: fix default/example mixup
* nixos/tor: use docbook in documentation
Also use more elegant optionalString for optional strings.
* tor: seperate hidden service port by newline
* tor: better example for hidden service path
a path below /var/lib/tor is usually used for hidden services
The PAM service name used before this commit was "sambda", with an
extra 'd'. For some reason I don't quite fully understand this typo
prevents GDM from starting. This change fixes that as tested in VMs
built using "nixos-rebuild -I nixpkgs=<mypkgs> build-vm".
Although it is quite safe to restart ```libvirtd``` when there are only ```qemu``` machines, in case if there are ```libvirt_lxc``` containers, a restart may result in putting the whole system into an odd state: the containers go on running but the new ```libvirtd``` daemons do not see them.
```Tinc```'s pid file has more info than just a pid
```
# cat /run/tinc.dmz.pid
12209 7BD4A657B4A04364D268D188A0F4AA972A05247D802149246BBE1F1E689CABA1 127.0.0.1 port 656
```
so ```systemd``` fails to parse it.
It results in long (re)start times when ```systemd``` waits for a correct pid file to appear.
Do the right thing, and use multiple interfaces for policy routing. For example, WireGuard interfaces do not allow multiple routes for the same CIDR range.
Fixes https://github.com/NixOS/nixpkgs/issues/27996.
Updates instructions for generating hashes passwords for use in a
Mosquitto password file. Using `mosquitto_passwd` to generate these
hashes is a little less convenient, but the results are more likely to
be compatible with the mosquitto daemon.
As far as I can tell, the hashes generated with `mkpassd` did not work
as intended. But this may have been hidden by another bug:
https://github.com/NixOS/nixpkgs/issues/27130.
This adds a convenient per-peer option to set the routing table that associated routes are added to. This functionality is very useful for isolating interfaces from the kernel's global routing and forcing all traffic of a virtual interface (or a group of processes, via e.g. "ip rule add uidrange 10000-10009 lookup 42") through Wireguard.
In order for DynamicUser = true to work in services, we need the
nss-systemd module to be able to resolve the user and group names
generated dynamically.
The piwki setup documentation as it stands has two issues:
- the `ALTER USER root` line does not work with MariaDB or MySQL 5.5
- the auth plugin details vary between MariaDB and MySQL
auditd creates an ordering cycle by adding wantedBy = [ "basic.target" ],
because of this the job job systemd-update-utmp.service/start is deleted.
Adding unitConfig.DefaultDependencies = false; to the auditd service unbreaks the cycle.
See also #11864
Evaluation error introduced in a0d464033c.
If the value for timeZone is null it shouldn't be even tried to coerce
it into a string.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @lheckemann, @joachifm
enableUpstreamMimeTypes controls whether to include the list of mime
types bundled with lighttpd (upstream). This option is enabled by
default and gives a much more complete mime type list than we currently
have. If you disable this, no mime types will be added by NixOS and you
will have to add your own mime types in services.lighttpd.extraConfig.
* mod_dirlisting is auto-loaded by lighttpd and should not be explicitly
loaded in the configuration file.
* The rest comes from looking at "ls -1 $lighttpd/lib/*.so" when
lighttpd is built with "enableMagnet" and "enableMysql".
Exhibitor tests the auto-manage-instances config value to see if it's a
non-zero integer, rather than a true/false string, which was getting
put into the config before. This now causes autoManageInstances to
behave correctly.
Checking the keyboard layout has been a long set of hurdles so far, with
several attempts. Originally, the checking was introduced by @lheckemann
in #23709.
The initial implementation just was trying to check whether the symbols/
directory contained the layout name.
Unfortunately, that wasn't enough and keyboard variants weren't
recognized, so if you set layout to eg. "dvorak" it will fail with an
error (#25526).
So my improvement on that was to use sed to filter rules/base.lst and
match the layout against that. I fucked up twice with this, first
because layout can be a comma-separated list which I didn't account for
and second because I ran into a Nix issue (NixOS/nix#1426).
After fixing this, it still wasn't enough (and this is btw. what
localectl also does), because we were *only* matching rules but not
symbols, so using "eu" as a layout won't work either.
I decided now it's the time to actually use libxkbcommon to try
compiling the keyboard options and see whether it succeeds. This comes
in the form of a helper tool called xkbvalidate.
IMHO this approach is a lot less error-prone and we can be sure that we
don't forget about anything because that's what the X server itself uses
to compile the keymap.
Another advantage of this is that we now validate the full set of XKB
options rather than just the layout.
Tested this against a variety of wrong and correct keyboard
configurations and against the "keymap" NixOS VM tests.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @lheckemann, @peti, @7c6f434c, @tohl, @vcunat, @lluchs
Fixes: #27597
Creating and then erasing the key relies on the disk erasing data
correctly, and otherwise allows attackers to simply decrypt swap just
using "secretkey". We don't actually need a LUKS header, so we can save
ourselves some pointless disk writes and identifiability.
In addition, I wouldn't have made the awful mistake of backing up my swap partition's LUKS header instead of my zpool's. May my data rest in peace.
- Remove useless escape of question mark
- Fix and quoting
- Add some '&&s' for correctness
- Add escapeShellArg
- Remove &&s in preStart
Edited by grahamc: fixed the ${} typo on line 246
The previous package didn't build properly due to a bug in the build
script, and the nixos module didn't evaluate due to missing descriptions
in the options. This fixes both issues.
It also adds missing command-line options that weren't able to be set
and properly converts bools to the strings exhibitor expects.
Syntax errors prevented important parameters from being passed to
oauth2_proxy, which could have permitted unauthorised access to
services behind the proxy.
This allows to run the prune job periodically on a machine.
By default the if enabled the job is run once a week.
The structure is similar to how system.autoUpgrade works.
The systemd service file shipped with strongswan has strongswan started after `network-online`. It turns out that this is for good reason: failure to connect on boot otherwise.
See this thread on the mailing list, which my colleague initiated after finding that our NixOS strongswan config wouldn't connect on boot:
https://lists.strongswan.org/pipermail/users/2017-January/010359.html
Tested on a local config (which has the strongswan service config overridden).
The helper tool had a very early check whether the automatically created
CA key/cert are available and thus it would abort if the key was
unavailable even though we don't need or even want to have the CA key.
Unfortunately our NixOS test didn't catch this, because it was just
switching from a configuration with an automatically created CA to a
manual configuration without deleting the generated keys and certs.
This is done now in the tests and it's also fixed in the helper tool.
Reported-by: @jpotier
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
1. Needs to call makeTest or else nothing happens when you run
`nix-build nixos/tests/postgresql.nix`.
2. Tests run as root, so there needs to be a corresponding user in
PostgreSQL.
Use xmlstarlet to update the OVMF path on each startup, like we do for
<emulator>...qemu-kvm</emulator>.
A libvirt domain using UEFI cannot start if the OVMF path is garbage
collected/missing.
Instead of grep and sed, which is brittle.
(I don't know how to preserve the comment we currently add to say that
this line is auto-updated. But I don't think it adds much value, so I'm
not spending any effort on it.)
The current behavior was for gitlab-runner is to immediately terminate when there
was a restart required. This can lead to aborted builds and is annoying to users.
By enabling graceful mode gitlab-runner will wait for all builds to finish before
terminating. The disadvantage is that a nixos-rebuild switch needs to wait till
all jobs are done. Because of that it is not enabled by default.
#11864 Support Linux audit subsystem
Add the auditd.service as NixOS module to be able to
generate profiles from /var/log/audit/audit.log
with apparmor-utils.
auditd needs the folder /var/log/audit to be present on start
so this is generated in ExecPreStart.
auditd starts with -s nochange so that effective audit processing
is managed by the audit.service.
Originially, `programs.zsh` sets default values for some
initialisation scripts.
Nix resolves the case of multiple values by concatenating them all.
It is however impossible to predict where the default script will be
inserted; but we never want the default value to override the
user-specified ones.
Now, it doesn't set default values; almost everything is hardcoded at
the begining of the file.
* lib: introduce imap0, imap1
For historical reasons, imap starts counting at 1 and it's not
consistent with the rest of the lib.
So for now we split imap into imap0 that starts counting at zero and
imap1 that starts counting at 1. And imap is marked as deprecated.
See c71e2d4235 (commitcomment-21873221)
* replace uses of lib.imap
* lib: move imap to deprecated.nix
Regression introduced by 44c64fef16.
The services.xserver.layout option allows to specify more than one
layout separated by comma, which the commit above didn't take into
account.
This is very similar to @lheckemann's pull request (#26984) but differs
in the following ways:
* Print out the full list available layouts (as suggested by @0xABAB
in [1]).
* Loop over $layout using the default IFS (and thus no need for
escaping ${cfg.layout}), because the layouts won't contain white
spaces.
* Re-do the error message, which now uses multiple echos instead of a
heredoc, so the line is wrapped according to the viewers terminal
width.
I've tested this with several good and bad layouts and also against the
keymap NixOS VM subtests.
[1]: https://github.com/NixOS/nixpkgs/pull/26984#discussion_r125146700
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Fixes: #26961Closes: #26984
