Fixes issue #33231 and makes it possible to enable Plasma and KDE at the same time.
Previously, this worked like this:
- The gdk-pixbuf package comes with a cache file covering the modules bundled
with gdk-pixbuf.
- The librsvg package comes with a cache covering modules from gdk-pixbuf as
well as librsvg.
- plasma5 and xfce modules set the environment variable GDK_PIXBUF_MODULE_FILE
to the one from librsvg, so that SVG was supported in addition to the
formats supported by gdk-pixbuf. However if both were enabled a configuration
conflict would result (despite setting to the same value).
While this sort of worked (ignoring the conflict which perhaps could be hacked
around), it is unscalable and a hack, as there would be a real problem when one
wanted to add a third package that supports additional image formats.
A new NixOS module (gdk-pixbuf) is added with a configuration option
(modulePackages) that other modules use to request specific packages to be
included in the loaders cache. When any package is present in the list, the
module generates a system-wide loaders cache which includes the requested
packages (and always gdk-pixbuf itself), and sets the environment variable
GDK_PIXBUF_MODULE_FILE to point to the generated cache file.
The plasma5 and xfce modules are updated to add librsvg to modulePackages
instead of setting GDK_PIXBUF_MODULE_FILE.
Note that many packages create wrappers that set GDK_PIXBUF_MODULE_FILE,
some directly to the one from librsvg. Therefore this change does not
change the existing hack in the librsvg package which ensures that
file is generated. This change aims only to solve the conflict in the
global environent variable configuration.
The freeradius service was merged with #34587
but the module was not added to module-list.
This commit fixes that and enables the use of
services.freeradius in nixos configuration.
The `zsh-autosuggestions` package provides several configuration options
such as a different highlight style (like `fg=cyan` which is easier to
read).
With `rename.nix` the old `programs.zsh.enableAutosuggestions` is still
functional, but yields the following warning like this during evaluation:
```
trace: warning: The option `programs.zsh.enableAutosuggestions' defined in `<unknown-file>' has been renamed to `programs.zsh.autosuggestions.enable'.
```
The module provides the most common `zsh-autosuggestions` (highlight
style and strategy) as options that will be written into the interactive
shell init (`/etc/zshrc` by default). Further configuration options can
be declared using the `extraConfig` attr set:
```
{
programs.zsh.autosuggestions.extraConfig = {
"ZSH_AUTOSUGGEST_BUFFER_MAX_SIZE" = "buffer_size";
};
}
```
A full list of available configuration options for `zsh-autosuggestions`
can be viewed here: https://github.com/zsh-users/zsh-autosuggestions/blob/v0.4.3/README.md
`xsslock` (which was originally packaged in 6cb1d1aaaf)
is a simple screensaver which connects a given screen locker (e.g.
`i3lock`) with `logind`. Whenever `loginctl lock-sessions` is invoked
the locker will be used to lock the screen. This works with its power
management features (e.g. `lid switch`) as well, so the PC can be locked
automatically when the lid is closed.
The module can be used like this:
```
{
services.xserver.enable = true;
programs.xss-lock.enable = true;
programs.xss-lock.lockerCommand = "i3lock";
}
```
* networking/stubby.nix: implementing systemd service module for stubby
This change implements stubby, the DNS-over-TLS stub resolver daemon.
The motivation for this change was the desire to use stubby's
DNS-over-TLS funcitonality in tandem with unbound, which requires
passing certain configuration parameters. This module implements those
config parameters by exposing them for use in configuration.nix.
* networking/stubby.nix: merging back module list
re-merging the module list to remove unecessary changes.
* networking/stubby.nix: removing unecessary capabilities flag
This change removes the unecessary flag for toggling the capabilities
which allows the daemon to bind to low ports.
* networking/stubby.nix: adding debug level logging bool
Adding the option to turn on debug logging.
* networking/stubby.nix: clarifying idleTimeout and adding systemd target
Improving docs to note that idleTimeout is expressed in ms. Adding the
nss-lookup `before' target to the systemd service definition.
* networking/stubby.nix: Restrict options with types.enum
This change restricts fallbackProtocol and authenticationMode to accept
only valid options instead of any list or str types (respectively). This
change also fixes typo in the CapabilityBoundingSet systemd setting.
* networking/stubby.nix: cleaning up documentation
Cleaning up docs, adding literal tags to settings, and removing
whitespace.
* networking/stubby.nix: fixing missing linebreak in comments
* networking/stubby.nix: cleaning errant comments
When doing source routing/multihoming, it's practical to give names to routing
tables. The absence of the rt_table file in /etc make this impossible.
This patch recreates these files on rebuild so that they can be modified
by the user see NixOS#38638.
iproute2 is modified to look into config.networking.iproute2.confDir instead of
/etc/iproute2.
Allow out of band communication between qemu VMs and the host.
Useful to retrieve IPs of VMs from the host (for instance when libvirt can't analyze
DHCP requests because VMs are configured with static addresses or when
there is connectivity default).
This patch is heavily inspired by bd0d8ed807 which added
a setcap wrapper for `mtr` in order to allow running `mtr` without
`sudo`. The need for the capability `cap_net_raw` that can be registered using
`setcap` has been documented in the Arch Wiki: https://wiki.archlinux.org/index.php/Capabilities#iftop
A simple testcase has been added which starts two machines, one with a
setcap wrapper for `iftop`, one without. Both testcases monitor the
bandwidth usage of the machine using the options `-t -s 1` once, the
machine with setcap wrapper is expected to succeed, the `iftop` on the
machine without setcap wrapper is expected to return a non-zero exit
code.
- prometheus exporters are now configured with
`services.prometheus.exporters.<name>`
- the exporters are now defined by attribute sets
from which the options for each exporter are generated
- most of the exporter definitions are used unchanged,
except for some changes that should't have any impact
on the functionality.
By default, OnlyKey device (https://crp.to/p/) won't work on Linux (and,
therefore, NixOS). This is unintuitive and requires one to search for a
solution in the documentation.
This change allows one to enable OnlyKey device support directly from
their NixOS configuration.
All 5 daemon types can be enabled and configured through the module and the module both creates the ceph.conf required but also creates and enables specific services for each daemon, based on the systemd service files that upstream provides.
The strongswan-swanctl systemd service starts charon-systemd. This implements a IKE daemon
very similar to charon, but it's specifically designed for use with systemd. It uses the
systemd libraries for a native integration.
Instead of using starter and an ipsec.conf based configuration, the daemon is directly
managed by systemd and configured with the swanctl configuration backend.
See: https://wiki.strongswan.org/projects/strongswan/wiki/Charon-systemd
Note that the strongswan.conf and swantctl.conf configuration files are automatically
generated based on NixOS options under services.strongswan-swanctl.strongswan and
services.strongswan-swanctl.swanctl respectively.
* digitalbitbox: init at 2.2.2
The commits that lead to this have been squashed from independent
commits see branch @vidbina/add/digitalbitbox-wip that did the
following:
- 0a3030fa0ec digitalbitbox: init at 2.2.2
- c18ffa3ffd4 digitalbitbox: moved meta to EOF
- 0c5f3d6972a digitalbitbox: using preConfigure + configureFlags
- a85b1dfc3fd digitalbitbox: nativeBuildInputs
- 90bdd35ef0f digitalbitbox: autoreconfHook
- 91810eea055 digitalbitbox: default installPhase & makeWrapper
- 90e43fb7e2a digitalbitbox: doc rm $PWD hack & printf-tee deal
- fd033b2fe5a digitalbitbox: cleanup, alphabetically sort attrs
- c5907982db3 digitalbitbox: added hardware module
- 88e46bc9ae0 digitalbitbox: added program module
- amend to change name: dbb-app -> digitalbitbox
- amend to add install instructions based on feedback
(https://github.com/NixOS/nixpkgs/pull/33787#issuecomment-362813149)
- amend to add longDescription
- moved program to its own dir
- overridable udev rules handling
- added docs to manual
- added package attr to program module
- added package attr to hardware module
* digitalbitbox: use libsForQt5.callPackage
This was only applicable to very specific hardware, and the only person
with an apparent interest in maintaining it (me) no longer uses the
hardware in question.
To make the configuration of `yabar` more pleasant and easier to
validate, a NixOS module will be quite helpful.
An example config could look like this:
```
{
programs.yabar = {
enable = true;
bars.top.indicators.exec = "YA_DATE";
};
}
```
The module adds a user-controlled systemd service which runs `yabar` after
starting up X.
* bemenu: init at 2017-02-14
* velox: 2015-11-03 -> 2017-07-04
* orbment, velox: don't expose subprojects
the development of orbment and velox got stuck
their subprojects (bemenu, dmenu-wayland, st-wayland) don't work correctly outside of parent projects
so hide them to not confuse people
swc and wld libraries are unpopular and unlike wlc are not used by anything except velox
* pythonPackages.pydbus: init at 0.6.0
* way-cooler: 0.5.2 -> 0.6.2
* nixos/way-cooler: add module
* dconf module: use for wayland
non-invasive approach for #31293
see discussion at #32210
* sway: embed LD_LIBRARY_PATH for #32755
* way-cooler: switch from buildRustPackage to buildRustCrate #31150
* Add options:
- enable
- davUser (default: "davfs2")
- davGroup (default: "davfs2)
* Add davfs2 user or group if they are not specified in the
configuration
* nghttpx: Add a new NixOS module for the nghttpx proxy server
This change also adds a global `uid` and `gid` for a `nghttpx` user
and group as well as an integration test.
* nixos/nghttpx: fix building manual
postage is no longer maintained and has been replaced by the identical pgmanage. See:
https://github.com/workflowproducts/postage#postage-has-been-replaced-with-pgmanage
The following error is raised when a user enables the deprecated `services.postage.enable` option:
Failed assertions:
- services.postage is deprecated in favor of pgmanage. They have the same options so just substitute postage for pgmanage.
Currently, ecryptfs support is coupled to `security.pam.enableEcryptfs`, but one
might want to use ecryptfs without enabling the PAM functionality. This commit
splits it out into a `boot.supportedFilesystems` switch.
All available options were just enabling
hardware.enableRedistributableFirmware. There were nix files without
modules which weren't referenced anywhere.
This has been broken nearly all the time due to the patches needed to
iproute2 not being compatible with the newer versions we have been
shipping. As long as Ubuntu does not manage to upstream these changes
so they are maintained with iproute2 and we don't have a maintainer
updating these patches to new iproute2 versions it is not feasible to
have this available.
* prometheus-collectd-exporter service: init module
Supports JSON and binary (optional) protocol
of collectd.
* nixos/prometheus-collectd-exporter: submodule is not needed for collectdBinary
This file was removed in 6f0b538044, but sufficient care was not taken
to remove all references to it. Without this change, trying to
rebuild nixos fails.
The latest release of libyamlcpp in nixpkgs does not build because it
uses an older version of boost than the one in nixpkgs and therefore
expects a particular header file which does not exist in the latest
boost anymore. For this reason, a later (git) version of libyamlcpp is
used here (which actually doesn't even require boost).
The substituteInPlace in the prePatch phase is needed because libevdev
places its headers in non-standard places, meaning Nix cannot normally
find them. The `cut` command removes the first two "-I" characters from
the output of `pkg-config`. This needs to be in the prePatch phase
because otherwise Nix will patch these lines to `/var/empty`, meaning
you would have less specific replacement (in case other lines are also
patched to `/var/empty`).
I wrote the patch. (I believe it is NixOS specific.)
