- Give a more accurate description of how fileSystems.<name/>.neededForBoot
works
- Give a more detailed description of how fileSystems.<name/>.encrypted.keyFile
works
- remove optons cfg.user, cfg.groups
- add option `serverUser` which is required when not using nginx
- add `serverUser` to nextcloud group
- set user/group to "nextcloud" for nextcloud services
- make setup-service non-root
There are circumstances where running secondary DHCP servers in
non-authoritative mode is advantageous. Retain the previous
authoritative behavior as a default.
* Update: https://gitlab.freedesktop.org/pwithnall/malcontent/-/releases/0.8.0
* Fix the separation patch.
* Add `itstool` to ui (needed for building localized help).
* Use `pkg-config` instead of the `pkgconfig` alias.
* Fix some issues related to multiple outputs:
* Make the module pass specific output to `dbus.packages` since the `dbus` NixOS module will not generate configuration with correct interface paths otherwise.
* Change `malcontent-ui` package to primarily-a-program type derivation (`out`+`lib` instead of `bin`+`out`) since there are more and more `malcontent-control`-specific assets.
* This also fixes the issue where application data (desktop files, icons…) were installed to `out`, which is not installed by `environment.systemPackages`/`system-path.nix`’s `buildEnv` by default when `bin` output is also present.
* Make `malcontent` package install `out` output too so that `system-path.nix` links that too. It contains the AccountsService & Polkit data files.
* Split the library and PAM module out of `malcontent.out` so that they are not installed with the data files.
* This revealed a bug in the `gobject-introspection` setup hook.
I just got an Xbox One controller and I wasn't satisfied with the xpad
driver that ships with the Linux kernel
xpadneo supports more features and fixes problems with
incorrect button mappings
https://atar-axis.github.io/xpadneo
This change introduces more fine-grained requestEncryptionCredentials.
While previously when requestEncryptionCredentials = true, the
credentials for all imported pools and all datasets in these imported
pools were requested, it is now possible to select exactly the pools and
datasets for which credentials should be requested.
It is still possible to set requestEncryptionCredentials = true, which
continues to act as a wildcard for all pools and datasets, so the change
is backwards compatible.
This is necessary for VPNs where some of the nodes run pre-1.1 versions.
Most of Linux distros [0] and even the nixpkgs.tinc attribute run on that
version, so it might be useful to have that option.
[0] https://repology.org/project/tinc/versions
The toplevel derivations of systems that have `networking.hostName`
set to `""` (because they want their hostname to be set by DHCP) used
to be all named
`nixos-system-unnamed-${config.system.nixos.label}`.
This makes them hard to distinguish.
A similar problem existed in NixOS tests where `vmName` is used in the
`testScript` to refer to the VM. It defaulted to the
`networking.hostName` which when set to `""` won't allow you to refer
to the machine from the `testScript`.
This commit makes the `system.name` configurable. It still defaults to:
```
if config.networking.hostName == ""
then "unnamed"
else config.networking.hostName;
```
but in case `networking.hostName` needs to be to `""` the
`system.name` can be set to a distinguishable name.
The resilio module places the directoryRoot configuration in the webui
section. However, the generated configuration fails on the current
version of Resilio Sync with:
Invalid key context: 'directory_root' must be in global config section
This change places this key in the global configuration section to
solve this error.
Build error introduced in fe7053f75a:
parser error : Opening and ending tag mismatch: commmand line 6139 and command
escription><para>Base64 preshared key generated by <commmand>wg genpsk</command>
^
Writing "command" with only two "m" fixes building the NixOS manual.
Signed-off-by: aszlig <aszlig@nix.build>
This allows disabling users.mutableUsers without configuring any
authentication mechanisms (passwords, authorized SSH keys) other than
Google OS Login.
> WARNING: PID file creation will be removed in Sidekiq 6.0, see #4045.
Please use a proper process supervisor to start and manage your
services
Since NixOS uses a proper process supervisor AND does not use the PID
file anywhere, we can just drop it to be upwards compatible and fix that
warning.
This is analogous to #70447.
With security.lockKernelModules=true, docker commands result in the following
error without at least loading veth:
$ docker run hello-world
/nix/store/mr50kaan2vs4gc40ymwncb2vci25aq7z-docker-19.03.2/libexec/docker/docker: Error response from daemon: failed to create endpoint epic_kare on network bridge: failed to add the host (veth8b381f3) <=> sandbox (veth348e197) pair interfaces: operation not supported.
ERRO[0003] error waiting for container: context canceled
This adds yubikey-agent as a package and a nixos module.
On macOS, we use `wrapProgram` to set pinentry_mac as default in PATH;
on Linux we rely on the user to set their preferred pinentry in PATH.
In particular, we use a systemd override to prefix PATH to select a
chosen pinentry program if specified.
On Linux, we need libnotify to provide the notify-send utility for
desktop notifications (such as "Waiting for Yubikey touch...").
This might work on other flavors of unix, but I haven't tested.
We reuse the programs.gnupg.agent.pinentryFlavor option for
yubikey-agent, but in doing so I hit a problem: pinentryFlavour's
default value is specified in a mkDefault, but only conditionally. We
ought to be able to pick up the pinentryFlavour whether or not gpg-agent
is running. As a result, this commit moves the default value to the
definition of programs.gnupg.agent.enable.
This reverts commit d3a26a5ecd.
Using ServiceConfig.ExecStart instead of script lead to the content not
being executed in a shell anymore, which broke the secrets being read
from a file and passed as a command line parameter.
This lets users do sneaky things before systemd starts, and
permanently affect the environment in which systemd runs. For example,
we could start systemd in a non-default network namespace by setting
the systemdExecutable to a wrapper script containing:
#!/bin/sh
ip netns add virtual
touch /var/run/netns/physical
mount -o bind /proc/self/ns/net /var/run/netns/physical
exec ip netns exec virtual systemd
_note: the above example does literally work, but there are unresolved
problems with udev and dhcp._
In the current implementation, there's no possibility to modify the default
parameter for keepalive. This is a number that indicates how frequently
keepalive messages should be sent from the worker to the buildmaster,
expressed in seconds. The default (600) causes a message to be sent to
the buildmaster at least once every 10 minutes.
If the worker is behind a NAT box or stateful firewall, these messages
may help to keep the connection alive: some NAT boxes tend to forget about
a connection if it has not been used in a while. When this happens, the
buildmaster will think that the worker has disappeared, and builds will
time out. Meanwhile the worker will not realize than anything is wrong.
This is required by (among others) Podman to run containers in rootless mode.
Other distributions such as Fedora and Ubuntu already set up these mappings.
The scheme with a start UID/GID offset starting at 100000 and increasing in 65536 increments is copied from Fedora.
Falling back to unversioned `/etc/fonts/conf.d` when versioned one does not exist
is problematic since it only occurs on non-NixOS systems and those are likely
to have a different version of fontconfig. When those versions use incompatible
elements in the config, apps using fontconfig will crash.
Instead, we are now falling back to the in-package `fonts.conf` file that loads
both the versioned global `conf.d` directory and the in-package `conf.d` since using
upstream settings on non-NixOS is preferable to not being able to use apps there.
In fact, we would not even need to link `fonts.conf`, as the in-package `fonts.conf`
will be always used unless someone creates the global one manually (the option is still
retained if one wants to write a custom NixOS module and to avoid unnecessary stat call on NixOS).
Additionally, since the `fonts.conf` will always load `conf.d` from the package, we no longer
need to install them to sytem `/etc` in the module. This needed some mucking with `50-user.conf`
which disables configs in user directories (a good thing IMO, NixOS module will turn it back on)
but otherwise, it is cleaner. The files are still prioritized by their name, regardless of their location.
See https://github.com/NixOS/nixpkgs/pull/73795#issuecomment-634370125 for more information.
Per upstream:
> libvirtd-tcp.socket - the unit file corresponding to the TCP 16509
> port for non-TLS remote access. This socket should not be configured
> to start on boot until the administrator has configured a suitable
> authentication mechanism.
Fixes error
Can't use an undefined value as an ARRAY reference at /nix/store/...-install-grub.pl line 642, <FILE> line 5.
with `/boot/grub/state` being:
```
grub
2.04
no
/dev/sda
/boot
```
I am not sure where the trailing empty line can come from; the script does not
seem to write it. In any case, now we handle that situation as well.
Further, ensure that `extraGrubInstallArgs` defaults to the empty array
if its key is not present in the `jsonState`.
For example, turns the error
cannot copy /nix/store/g24xsmmsz46hzi6whv7qwwn17myn3jfq-grub-2.04/share/grub/unicode.pf2 to /boot
into the more useful
cannot copy /nix/store/g24xsmmsz46hzi6whv7qwwn17myn3jfq-grub-2.04/share/grub/unicode.pf2 to /boot: Read-only file system
Useful for when you need to build grub modules into your grub kernel
to get a working boot, as shown in the added example.
To store this new value, we switch to more structural JSON approach.
Using one line per value to store in `/boot/grub/state` gets really messy when
the values are arrays, or even worse, can contain newlines (escaping would be
needed). Further, removing a value from the file would get extra messy
(empty lines we'd have to keep for backwards compatibility).
Thus, from now on we use JSON to store all values we'll need in the future.
Without this, systemd-boot does not add an EFI boot entry for itself.
The reason it worked before this fix is because it would fall back to
the default installed \EFI\BOOT\BOOTX64.EFI
`sslCACert` was used for trust store of client and server certificates. Since `smtpd_tls_ask_ccert` defaults to no the setup of `smtpd_tls_CApath` was removed.
>By default (see smtpd_tls_ask_ccert), client certificates are not requested, and smtpd_tls_CApath should remain empty.
see http://www.postfix.org/postconf.5.html#smtpd_tls_CAfile
boot.loader.grub.device` was hardcoded to `bootDevice`, which is
wrong, because that's the device for `/`, and with `useBootLoader`
the boot loader is not on that device.
This bug probably came into existence because of bad naming;
`virtualisation.bootDevice` has description
"The disk to be used for the root filesystem", which is very confusing;
it should be `.rootDevice` then!
Unfortunately, the description is right and the attribute name is wrong,
so it is not easy to change this without deprecation.
This commit ensures that even if you use `useBootLoader` and
`diskInterface == "scsi"`, the created VM can boot through, and can run
`nixos-rebuild afterwards.
It also adds extra commentary to explain what's going on in this module
in general in relation to `useBootLoader`.
This explanation was contained in the description of
security.initialRootPassword but got lost when it was deprecated
a long ago (f496c3c) and removed.
This option has been deprecated for a long time because is redundant
(users.users.root.initialHashedPassword exists).
Moreover, being of type string, it required to handle the special value
"!" separately, instead of using just `null`.
This explains the
# Allow the user to log in as root without a password.
users.users.root.initialHashedPassword = "";
that the NixOS installer live systems use in
`profiles/installation-device.nix`.
Currently the service doesn't detect if on of the packages is updated
and doesn't restart.
By manually adding a trigger we make sure the service restarts if any of
the involved packages update.
In certain cases, for example when custom OpenLDAP modules are
compiled into the binary, users may want to override the package used
for OpenLDAP.
This is especially common in setups where LDAP is the primary
authentication source, as good password hashing mechanisms need to be
enabled as extra modules.
nixos/tests/initrd-openvpn: Add test for openvpn in the initramfs
The module in this commit adds new options that allows the
integration of an OpenVPN client into the initrd.
This can be used e.g. to remotely unlock LUKS devices.
This commit also adds two tests for `boot.initrd.network.openvpn`.
The first one is a basic test to validate that a failing connection
does not prevent the machine from booting.
The second test validates that this module actually creates a valid
openvpn connection.
For this, it spawns three nodes:
- The client that uses boot.initrd.network.openvpn
- An OpenVPN server that acts as gateway and forwards a port
to the client
- A node that is external to the OpenVPN network
The client connects to the OpenVPN server and spawns a netcat instance
that echos a value to every client.
Afterwards, the external node checks if it receives this value over the
forwarded port on the OpenVPN gateway.
We remove the configFile build flag override in the NixOS module.
Instead of embedding the conf file link to the binaries, we symlink it
to /etc/nsd/nsd.nix, the hardcoded config file location for the
various CLI nsd utilities.
This config file build option override is triggerring a nsd rebuild
for each configuration change. This prevent us to use the nixos cache
in many cases.
Co-authored-by: Erjo <erjo@cocoba.work>
This can be used to explicitly specify a specific dtb file, relative to
the dtb base.
Update the generic-extlinux-compatible module to make use of this option.
Some bootloaders might not properly detect the model.
If the specific model is known by configuration, provide a way to
explicitly point to a specific dtb in the extlinux.conf.
This option exposes the builder command used to populate an image,
honoring all options except the -c <path-to-default-configuration>
argument.
Useful to have for sdImage.populateRootCommands.
Special care needs to be taken w.r.t cross - the populate command runs
on the host platform, the activation script on the build platform (so
the builders differ)
Enhance the heuristics to make sure that a user doesn't accidentally
upgrade across two major versions of Nextcloud (e.g. from v17 to v19).
The original idea/discussion has been documented in the nixpkgs manual[1].
This includes the following changes:
* `nextcloud19` will be selected automatically when having a stateVersion
greater or equal than 20.09. For existing setups, the package has to
be selected manually to avoid accidental upgrades.
* When using `nextcloud18` or older, a warning will be thrown which recommends
upgrading to `nextcloud19`.
* Added a brief paragraph about `nextcloud19` in the NixOS 19.09 release
notes.
* Restart `phpfpm` if the Nextcloud-package (`cfg.package`) changes[2].
[1] https://nixos.org/nixos/manual/index.html#module-services-nextcloud-maintainer-info
[2] https://github.com/NixOS/nixpkgs/pull/89427#issuecomment-638885727
This option exposes the prefconfigured nextcloud-occ
program. nextcloud-occ can then be used in other systemd services or
added in environment.systemPackages.
The nextcloud test shows how it can be add in
environment.systemPackages.
The nix store more-or-less requires o+rx on all parent directories.
This is primarily because nix runs builders in a uid/gid mapped
user-namespace, and those builders have to be able to operate on the nix
store.
This check is especially helpful because nix does not produce a helpful
error on its own (rather, creating directories and such works, it's not
until 'mount --bind' that it gets an EACCES).
Helps users who run into this opaque error, such as in #67465.
Possibly fixes that issue if bad permissions were the only cause.
Turns out, #75510 was too restrictive.
We also need to allow str here, as some modules set this to
"/run/wrappers" to bring `/run/wrappers/bin` into $PATH of a unit.
- Add serve.enable option, which configures uwsgi and nginx to serve
the mailman-web application;
- Configure services to log to the journal, where possible. Mailman
Core does not provide any options for this, but will now log to
/var/log/mailman;
- Use a unified python environment for all components, with an
extraPackages option to allow use of postgres support and similar;
- Configure mailman's postfix module such that it can generate the
domain and lmtp maps;
- Fix formatting for option examples;
- Provide a mailman-web user to run the uwsgi service by default
- Refactor Hyperkitty's periodic jobs to reduce repetition in the
expressions;
- Remove service dependencies not related to functionality included in
the module, such as httpd -- these should be configured in user config
when used;
- Move static files root to /var/lib/mailman-web-static by default. This avoids
permission issues when a static file web server attempts to access
/var/lib/mailman which is private to mailman. The location can still
be changed by setting services.mailman.webSettings.STATIC_ROOT;
- Remove the webRoot option, which seems to have been included by
accident, being an unsuitable directory for serving via HTTP.
- Rename mailman-web.service to mailman-web-setup.service, since it
doesn't actually serve mailman-web. There is now a
mailman-uwsgi.service if serve.enable is set to true.
Since Buildbot 0.9.0, status targets were deprecated and ignored.
There's a very small line on startup explaining that, and status simply
isn't reported. Avoid others the same headaches, and do it right in the
NixOS module.
As there might have been changes in the way reporters are organized, and
configuration might need to be migrated remove the old option, and not
just provide an alias.
Previously the NixOS-specific configuration for man-db was in the
package itself and /etc/man.conf was completely ignored.
This change moves it to /etc/man_db.conf, making declarative
configuration practical again.
It's now possible to generate the mandb caches for all packages
installed through NixOS `environment.systemPackages` at build-time.
The standard location for the stateful cache (/var/cache/man) is also
configured to allow users to run `mandb` manually if they wish.
Since generating the cache can be expensive the option is off by
default.
In /etc/sudoers, the last-matched rule will override all
previously-matched rules. Thus, make the default rule show up first (but
still allow some wiggle room for a user to `mkBefore` it), before any
user-defined rules.
The systemd socket unit files now more precisely track the IPFS
configuration, by including any multaddr they can make a `ListenStream`
for. (The daemon doesn't currently support anything which would use
`ListDatagram`, so we don't need to worry about that.)
The tests use some of these features.
Specifying mailboxes as a list isn't a good approach since this makes it
impossible to override values. For backwards-compatibility, it's still
possible to declare a list of mailboxes, but a deprecation warning will
be shown.
VMSGVA is recommended by virtualbox for Linux clients.
Compared to VBoxVGA and VBoxSVGA it also supports 3D acceleration.
Adding the driver makes nixos work with all three supported graphics card
types.
