This basic module allows you to specify the tmux configuration.
As great as tmux is, some of the defaults are pretty awful, so having a
way to specify the config really helps.
- services.iodined moved to services.iodine
- configuration file backwards compatable
- old iodine server configuration moved to services.iodine.server
- attribute set services.iodine.clients added to specify any number
of iodine clients
- example:
iodine.clients.home = { server = "iodinesubdomain.yourserver.com"; ... };
- client services names iodine-name where name would be home
- Enforce that an option declaration has a "defaultText" if and only if the
type of the option derives from "package", "packageSet" or "nixpkgsConfig"
and if a "default" attribute is defined.
- Enforce that the value of the "example" attribute is wrapped with "literalExample"
if the type of the option derives from "package", "packageSet" or "nixpkgsConfig".
- Warn if a "defaultText" is defined in an option declaration if the type of
the option does not derive from "package", "packageSet" or "nixpkgsConfig".
- Warn if no "type" is defined in an option declaration.
Both Qt and GTK load plugins from the active profiles
automatically, so it is sufficient to install input methods
system-wide. Overriding the plugin paths may interfere with correct
operation of other plugins.
Add a module to make options to pam_oath module configurable.
These are:
- enable - enable the OATH pam module
- window - number of OTPs to check
- digits - length of the OTP (adds support for two-factor auth)
- usersFile - filename to store OATH credentials in
The Bitmessage protocol v3 became mandatory on 16 Nov 2014 and notbit does not support it, nor has there been any activity in the project repository since then.
Part of the way towards #11864. We still don't have the auditd
userland logging daemon, but journald also tracks audit logs so we
can already use this.
* Patched fish to load /etc/fish/config.fish if it exists (by default,
it only loads config relative to itself)
* Added fish-foreign-env package to parse the system environment
closes#5331
Adds a new service module for shairport-sync. Tested with a local
and remote pulseaudio server. Needs to be run as a user in the pulse group
to access pulseaudio.
This new service invokes `simp_le` for a defined set of certs on a regular
basis with a systemd timer. `simp_le` is smart enough to handle account
registration, domain validation and renewal on its own. The only thing
required is an existing HTTP server that serves the path
`/.well-known/acme-challenge` from the webroot cert parameter.
Example:
services.simp_le.certs."foo.example.com" = {
webroot = "/var/www/challenges";
extraDomains = [ "www.example.com" ];
email = "foo@example.com";
validMin = 2592000;
renewInterval = "weekly";
};
Example Nginx vhost:
services.nginx.appendConfig = ''
http {
server {
server_name _;
listen 80;
listen [::]:80;
location /.well-known/acme-challenge {
root /var/www/challenges;
}
location / {
return 301 https://$host$request_uri;
}
}
}
'';
This module implements a way to start one or more bepasty servers.
It supports configuring the listen address of gunicorn and how bepasty
behaves internally.
Configuring multiple bepasty servers provides a way to serve pastes externally
without authentication and provide creating,listing,deleting pastes interally.
nginx can be used to provide access via hostname + listen address.
`configuration.nix`:
services.bepasty = {
enable = true;
servers = {
internal = {
defaultPermissions = "admin,list,create,read,delete";
secretKey = "secret";
bind = "127.0.0.1:8000";
};
external = {
defaultPermissions = "read";
bind = "127.0.0.1:8001";
secretKey = "another-secret";
};
};
};
This option allows to define (declarative) Jenkins jobs, using Jenkins
Job Builder (JJB) as backend.
Example:
services.jenkins = {
enable = true;
jobBuilder = {
enable = true;
yamlJobs = ''
- job:
name: jenkins-job-test
builders:
- shell: echo 'Hello world!'
'';
};
};
Jobs can be defined using YAML, JSON and Nix.
Note that it really is declarative configuration; if you remove a
previously defined job, the module will remove the jobdir under
$JENKINS_HOME.
Jobs managed through the Jenkins WebUI (or by other means) are not
touched by this module.
Changes v1 -> v2:
* add nixJobs
* let jsonJobs take a list of strings (allows merge)
* 4 space indent in shell code
`man 1 info` says:
The first non-option argument, if present, is the menu entry to
start from; it is searched for in all `dir' files along INFOPATH.
If it is not present, info merges all `dir' files and shows the
result. Any remaining arguments are treated as the names of menu
items relative to the initial node visited.
Which means that this does what previous programs/info did and #8519
(on-the-fly infodir generation for Emacs) wanted to do, but for both
programs.
This provides support for Ubuntu Fan Networking [1].
This includes:
* The fanctl package, and a corresponding NixOS service.
* iproute patches.
* kernel patches.
closes#9188
1: https://wiki.ubuntu.com/FanNetworking
In 14f09e0, I've introduced the module under modules/programs, because
the legacy virtualbox.nix was also under that path. But because we
already have modules/virtualisation/virtualbox-guest.nix, it really
makes sense to put this module alongside of it as well.
This module thus has no change in functionality and I've tested
evaluation against nixos/tests/virtualbox.nix and the manual.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This module generates a /boot/extlinux/extlinux.conf bootloader
configuration file that is supported by e.g. U-Boot:
http://git.denx.de/?p=u-boot.git;a=blob;f=doc/README.distro;hb=refs/heads/master
With this, all ARM boards supported by U-Boot can be booted in a common
way (a single boot file generator, all boards booting via initrd like
x86) and with same boot menu functionality as GRUB has.
-- sample extlinux.conf file --
# Generated file, all changes will be lost on nixos-rebuild!
# Change this to e.g. nixos-42 to temporarily boot to an older configuration.
DEFAULT nixos-default
TIMEOUT 50
LABEL nixos-default
MENU LABEL NixOS - Default
LINUX ../nixos/n7vxfk60nb5h0mcbhkwwxhcz2q2nvxzv-linux-4.1.0-rc3-cpufreq-zImage
INITRD ../nixos/0ss2zs8sb6d1qn4gblxpwlxkfjsgs5f0-initrd-initrd
FDTDIR ../nixos/n7vxfk60nb5h0mcbhkwwxhcz2q2nvxzv-linux-4.1.0-rc3-cpufreq-dtbs
APPEND systemConfig=/nix/store/469qvr43ln8bfsnk5lzcz6m6jfcgdd4r-nixos-15.06.git.0b7a7a6M init=/nix/store/469qvr43ln8bfsnk5lzcz6m6jfcgdd4r-nixos-15.06.git.0b7a7a6M/init loglevel=8 console=ttyS0,115200n8 drm.debug=0xf
LABEL nixos-71
MENU LABEL NixOS - Configuration 71 (2015-05-17 21:32 - 15.06.git.0b7a7a6M)
LINUX ../nixos/n7vxfk60nb5h0mcbhkwwxhcz2q2nvxzv-linux-4.1.0-rc3-cpufreq-zImage
INITRD ../nixos/0ss2zs8sb6d1qn4gblxpwlxkfjsgs5f0-initrd-initrd
FDTDIR ../nixos/n7vxfk60nb5h0mcbhkwwxhcz2q2nvxzv-linux-4.1.0-rc3-cpufreq-dtbs
APPEND systemConfig=/nix/store/469qvr43ln8bfsnk5lzcz6m6jfcgdd4r-nixos-15.06.git.0b7a7a6M init=/nix/store/469qvr43ln8bfsnk5lzcz6m6jfcgdd4r-nixos-15.06.git.0b7a7a6M/init loglevel=8 console=ttyS0,115200n8 drm.debug=0xf
This is essentially what's been done for the official NixOS build slaves
and I'm using it as well for a few of my machines and my own Hydra
slaves.
Here's the same implementation from the Delft server configurations:
f47c2fc7f8/delft/common.nix (L91-L101)
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
I had to make several adjustments to make it work with nixos:
* Replace relative config file lookups with ENV variable.
* Modify gitlab-shell to not clear then environment when running
pre-receive.
* Modify gitlab-shell to write some environment variables into
the .authorized_keys file to make sure gitlab-shell reads the
correct config file.
* Log unicorn output to syslog.
I tried various ways of adding a syslog package but the bundler would
not pick them up. Please fix in a better way if possible.
* Gitlab-runner program wrapper.
This is useful to run e.g. backups etc. with the correct
environment set up.
Details:
* The option `fonts.fontconfig.ultimate.enable` can be used to disable
the fontconfig-ultimate configuration.
* The user-configurable options provided by fontconfig-ultimate are
exposed in the NixOS module: `allowBitmaps` (default: true),
`allowType1` (default: false), `useEmbeddedBitmaps` (default: false),
`forceAutohint` (default: false), `renderMonoTTFAsBitmap` (default:
false).
* Upstream provides three substitution modes for substituting TrueType
fonts for Type 1 fonts (which do not render well). The default,
"free", substitutes free fonts for Type 1 fonts. The option "ms"
substitutions Microsoft fonts for Type 1 fonts. The option "combi"
uses a combination of Microsoft and free fonts. Substitutions can also
be disabled.
* All 21 of the Infinality rendering modes supported by fontconfig-ultimate
or by the original Infinality distribution can be selected through
`fonts.fontconfig.ultimate.rendering`. The default is the medium style
provided by fontconfig-ultimate. Any of the modes may be customized,
or Infinality rendering can be disabled entirely.
'torify' now ships with the tor bundle itself; and using torsocks is
recommended over tsocks (torify will use torsocks automatically.)
Signed-off-by: Austin Seipp <aseipp@pobox.com>
We will simply rename the previous module and add a warning whenever the
module is included directly, pointing the user to the right option and
also enable it as well (in case somebody has missed the option and is
wondering why VirtualBox doesn't work anymore).
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
The dnscrypt-proxy service relays regular DNS queries to
a DNSCrypt enabled upstream resolver.
The traffic between the client and the upstream resolver is
encrypted and authenticated, which may mitigate the risk of
MITM attacks and third-party snooping (assuming a trustworthy
upstream).
Though dnscrypt-proxy can run as a standalone DNS client,
the recommended setup is to use it as a forwarder for a
caching DNS client.
To use dnscrypt-proxy as a forwarder for dnsmasq, do
```nix
{
# ...
networking.nameservers = [ "127.0.0.1" ];
networking.dhcpcd.extraConfig = "nohook resolv.conf";
services.dnscrypt-proxy.enable = true;
services.dnscrypt-proxy.localAddress = "127.0.0.1";
services.dnscrypt-proxy.port = 40;
services.dnsmasq.enable = true;
services.dnsmasq.extraConfig = ''
no-resolv
server=127.0.0.1#40
listen-address=127.0.0.1
'';
# ...
}
```
I'm not using JFS, but this is to mainly make jfsutils available if you
have defined a JFS filesystem in your configuration.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This is proprietary software, and NixOS is intended as a free software
distribution. We currently don't have a mechanism like allowUnfree for
NixOS modules, so it's better to leave out modules for such
packages. Of couse, they can still be activated by doing:
imports = [ <nixpkgs/nixos/services/networking/copy-com.nix ];
This conflicts with the existing reference NTP daemon, so we're using
services.ntp.enable = mkForce false here to make sure both services
aren't enabled in par.
I was already trying to merge the module with services.ntp, but it would
have been quite a mess with a bunch of conditions on the package name.
They both have a bit in common if it comes to the configuration files,
but differ in handling of the state dir (for example, OpenNTPd doesn't
allow it to be owned by anything other than root).
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Now that the fail2ban service has the ".enable" option, I think it's
time to add it to the module list, so that we can enable it in
configuration.nix like this:
services.fail2ban.enable = true;
/tmp cleaning is done by systemd rather than stage-2-init
enableEmergencyMode moved from systemd to seperate module
new option to mount tmp on tmpfs
new option to enable additional units shipped with systemd
This version of module has disabled socketActivation, because until
nixos upgrade systemd to at least 214, systemd does not support
SocketGroup. So socket is created with "root" group when
socketActivation enabled. Should be fixed as soon as systemd upgraded.
Includes changes from #3015 and supersedes #3028
- Upgrade Nagios Core to 4.x
- Expose mainConfigFile and cgiConfigFile in module for finer
configuration control.
- Upgrade Plugins to 2.x
- Remove default objectDefs, which users probably want to customize.
- Systemd-ify Nagios module and simplify directory structure
- Upgrade Nagios package with more modern patch, and ensure the
statedir is set to /var/lib/nagios
Signed-off-by: Austin Seipp <aseipp@pobox.com>
This allows you to use the Linux kernel's built-in compressed memory as
swap space functionality.
It is recommended to enable only for kernel 3.14 (which is when zram came out of
the staging drivers area) or higher.
Previously all card-specific stuff was scattered across xserver.nix
and opengl.nix, which is ugly. Now it can be kept together in a single
card-specific module. This required the addition of a few internal
options:
- services.xserver.drivers: A list of { name, driverName, modules,
libPath } sets.
- hardware.opengl.package: The OpenGL implementation. Note that there
can be only one OpenGL implementation at a time in a system
configuration (i.e. no dynamic detection).
- hardware.opengl.package32: The 32-bit OpenGL implementation.
This module implements a significant refactoring in grsecurity
configuration for NixOS, making it far more usable by default and much
easier to configure.
- New security.grsecurity NixOS attributes.
- All grsec kernels supported
- Allows default 'auto' grsec configuration, or custom config
- Supports custom kernel options through kernelExtraConfig
- Defaults to high-security - user must choose kernel, server/desktop
mode, and any virtualisation software. That's all.
- kptr_restrict is fixed under grsecurity (it's unwriteable)
- grsecurity patch creation is now significantly abstracted
- only need revision, version, and SHA1
- kernel version requirements are asserted for sanity
- built kernels can have the uname specify the exact grsec version
for development or bug reports. Off by default (requires
`security.grsecurity.config.verboseVersion = true;`)
- grsecurity sysctl support
- By default, disabled.
- For people who enable it, NixOS deploys a 'grsec-lock' systemd
service which runs at startup. You are expected to configure sysctl
through NixOS like you regularly would, which will occur before the
service is started. As a result, changing sysctl settings requires
a reboot.
- New default group: 'grsecurity'
- Root is a member by default
- GRKERNSEC_PROC_GID is implicitly set to the 'grsecurity' GID,
making it possible to easily add users to this group for /proc
access
- AppArmor is now automatically enabled where it wasn't before, despite
implying features.apparmor = true
The most trivial example of enabling grsecurity in your kernel is by
specifying:
security.grsecurity.enable = true;
security.grsecurity.testing = true; # testing 3.13 kernel
security.grsecurity.config.system = "desktop"; # or "server"
This specifies absolutely no virtualisation support. In general, you
probably at least want KVM host support, which is a little more work.
So:
security.grsecurity.enable = true;
security.grsecurity.stable = true; # enable stable 3.2 kernel
security.grsecurity.config = {
system = "server";
priority = "security";
virtualisationConfig = "host";
virtualisationSoftware = "kvm";
hardwareVirtualisation = true;
}
This module has primarily been tested on Hetzner EX40 & VQ7 servers
using NixOps.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
This module adds the security.duosec attributes, which you can use to
enable simple two-factor authentication for NixOS logins.
The module currently provides PAM and SSH support, although the PAM unix
system configuration isn't automatically dealt with (although the
configuration is automatically built).
Enabling it is as easy as saying:
security.duosec.ssh.enable = true;
security.duosec.ikey = "XXXXXXXX...";
security.duosec.skey = "XXXXXXXX...";
security.duosec.host = "api-XXXXXXX.duosecurity.com";
security.duosec.group = "duosec";
which will enforce two-factor authentication for SSH logins for users in
the 'duosec' group.
This requires uid/gid support in the environment.etc module.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Uses standard NixOS user config merging.
Work in progress: The slave config does not actually start the slave agent. This just configures a
jenkins user if required. Bare minimum to enable a nice jenkins SSH slave.
By default the jenkins server is executed under the user "jenkins". Which can be configured using
users.jenkins.* options. If a different user is requested by changing services.jenkins.user then
none of the users.jenkins options apply.
This patch does not include jenkins slave configuration. Some config options will probably change
when this is implemented.
Aspects like the user and environment are typically identical between slave and master. The service
configs are different. The design is for users.jenkins to cover the shared aspects while
services.jenkins and services.jenkins-slave cover the master and slave specific aspects,
respectively.
Another option would be to place everything under services.jenkins and have a config that selects
master vs slave.
* Bump bumblebee to 3.2.1
* Remove config.patch - options it added can be passed to ./configure now
* Remove the provided xorg.conf
Provided xorg.conf was causing problems for some users,
and Bumblebee provides its own default configuration anyway.
* Make secondary X11 log to /var/log/X.bumblebee.log
* Add a module for bumblebee
Includes configuration option for the threshold beneath which to refill
the entropy pool - defaults to 1024 bits as this is the number used in
other distro's existing service files I looked at.
With kmscon, it is now possible to have a system without X that still
needs the mesa setup in /run/opengl-driver
Signed-off-by: Shea Levy <shea@shealevy.com>
This required some changes to systemd unit handling:
* Add an option to specify that a unit is just a symlink
* Allow specified units to overwrite systemd-provided ones
* Have gettys.target require autovt@1.service instead of getty@1.service
Signed-off-by: Shea Levy <shea@shealevy.com>
