"batch" is a shell script so invoking it via setuid wrapper never worked
anyway. (The kernel drops perms on executables with shebang.) A previous
nixpkgs commit made "batch" invoke the NixOS setuid "at" wrapper to gain
needed privileges.
Thanks to @yesbox for noticing.
Commit 987aac7 and issue #18183 were intended to fix support for other
things, but in the process, changed mdns_minimal to use the wrong return
setting, resulting in permanent failures in early boot, affecting things
like issue #30459.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Lately failing i686 tests like firefox have been blocking channel
releases. We're still building the tests for systems with limited
support but won't delay a channel release if they fail.
-s, --script: never prompts for user intervention
Sometimes the NixOS installer tests fail when they invoke parted, e.g.
https://hydra.nixos.org/build/62513826/nixlog/1. But instead of exiting
right there, the tests hang until the Nix builder times out (and kills
the build). With this change the tests would instead fail immediately,
which is preferred.
While at it, use "parted --script" treewide, so nobody gets build
timeout due to parted error (or misuse). (Only nixos/ use it, and only
non-interactive.)
A few instances already use the short option "-s", convert them to long
option "--short".
Add postgis 2.4.0
doesn't remove v2.3.1. There are some big change in 2.4 that people may
don't want. see https://postgis.net/docs/release_notes.html#idm41021
fix test call
modify following recommandation of lsix
When autoFormat is enabled, in order to successfully create a filesystem,
certain filesystems require specific options to be passed to mkfs to prevent
it from asking questions. This commit sets default formatOptions to "-q"
for "jfs" and "reiserfs" filesystems for this purpose.
Resolves#29140.
The submodule of the "docker-containers" option isn't recognized as a
proper submodule and thus neither properly type-checks nor are its
options included in the manual.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Regression introduced by a02bb00156.
The fix is done by disabling writableStore, because the latter will set
up an overlayfs on the Nix store within the VM, which in turn will
discard all the outputs of the resulting output path.
However in runInMachine we actually *want* the contents of the generated
path and also don't want a writable store within the VM (except of
course for $out, which is writable anyway).
I've added a small regression test to verifify the output in
nixos/tests/run-in-machine.nix to make sure this won't break again in
the future.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Regression introduced by 801c920e95.
Since then, the btrfsSimple subtest of the installer VM test fails with:
Btrfs did not return a path for the subvolume at /
The reason for this is that the output for "btrfs subvol show" has
changed between version 4.8.2 and 4.13.1.
For example the output of "btrfs subvol show /" in version 4.8.2 was:
/ is toplevel subvolume
In version 4.13.1, the output now is the following and thus the regular
expressions used in nixos-generate-config.pl and install-grub.pl now
match (which results in the error mentioned above):
/
Name: <FS_TREE>
UUID: -
Parent UUID: -
Received UUID: -
Creation time: -
Subvolume ID: 5
Generation: 287270
Gen at creation: 0
Parent ID: 0
Top level ID: 0
Flags: -
Snapshot(s):
In order to fix this I've changed nixos-generate-config.pl and
install-grub.pl, because both use "btrfs subvol show" in a similar vein,
so the regex for parsing the output now doesn't match anymore whenever
the volume path is "/", which should result in the same behaviour as we
had with btrfs-progs version 4.8.2.
Tested against the btrfsSimple, btrfsSubvols and btrfsSubvolDefault
subtests of the installer VM test and they all succeed now.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
The output of ./configure shows all modules/plugins, both enabled and
disabled. With this info we can finally build the _complete_ list of
modules. We were missing these:
mod_authn_gssapi
mod_authn_ldap
mod_geoip
(I hit this as I was building lighttpd with ldap support and the NixOS
module said ldap was unsupported, due to these missing entries in
allKnownModules.)
powertop attempt to load some kernel modules like msr by calling
modprobe. This is the counterpart to
88e43eb39b which has the powertop
executable search PATH for modprobe rather than hardcoding /sbin, and
actually adds the directory containing modprobe to its PATH for the
systemd service.
* Safer defaults for immutable znc config
I just lost all the options I configured in ZNC, because the mutable config was overwritten.
I accept any suggestions on the way to implement this, but overwriting a mutable config by default seems weird. If we want to do this, we should ensure that ZNC does not allow to edit the config via the webmin when cfg.mutable is false.
* Do not backup old config files.
There seems to be little need for backups if mutable becomes a voluntary opt-out.
* fixup
* the keyboard modules in all-hardware.nix are already defaults of
boot.initrd.availableKernelModules
* ide modules, hid_lenovo_tpkbd and scsi_wait_scan have been removed
because they're not available anymore
* i8042 was a duplicate (see few lines abowe)
All available options were just enabling
hardware.enableRedistributableFirmware. There were nix files without
modules which weren't referenced anywhere.
Container config example code mentions `postgresql` service, but the correct use of that service involves setting `system.stateVersion` option (as discovered in https://github.com/NixOS/nixpkgs/issues/30056).
The actual system state version is set randomly to 17.03 because I have no preferences here
The current `remotes` option is a string option containing nullmailer remote
definitions. However, those definitions may contain secret credentials and
should therefore not be put world-readable in the nix store.
I added a `remotesFile` option, which allows to specify a path to the remotes
definition file instead. This way, the definitions can be kept outside of the
nix store with more secure file permissions.
We now wait for dhcpcd to acquire a lease but dhcpcd is restarted on
system activation. As wpa_supplicant is stopped while dhcpcd is
restarting a significant delay is introduced on systems with wireless
network connections only. This changes the wpa_supplicant service to
also be restarted together with dhcpcd in case both services were
changed.
This reverts commit 0c81594a29.
It's no longer needed since systemd-vconsole-setup enumerates all ttys
until it finds a suitable one since systemd v234.
The current version is broken:
- there's no `openFirewall` attribute directly in the `cfg` set
- the `port` option is an attribute of the `confOptions` set
I used the proper attribute for the firewall port and moved the `openFirewall`
option directly up to the `services.znc` set, as it's rather a general option
for the whole service than a znc-specific option (which are located inside the
`confOptions` set).
This introduces dependency cycles.
A network file system to be running is not required for a network
connection to be available.
19759cfeab (commitcomment-22044519)
* Grants enough privileges to the configured user so that it can run
mysqldump.
* Adds a nixos test.
* Use systemd timers instead of a cronjob (by @fadenb).
* Creates a new user for backups by default, instead of using mysql
user.
* Ensures that backup user has write permissions on backup location.
* Write backup to a temporary file before renaming so that a failed
backup won't overwrite the previous backup, and so that the backup
location will never contain a partial backup.
Breaking changes:
* Renamed period to calendar to reflect the change in how to
configure the backup time.
* A failed backup will no longer result in cron sending an e-mail --
users' monitoring systems must be updated.
Resolves#24728
Spamassassin expects its system-wide configuration at /etc/spamassassin, and
some user tools (like sa-learn) need to read those configuration files.
Therefore, we provide a symlink from /etc/spamassassin to the appropriate Nix
store path to make sure those tools work without the user having to pass an
elaborate --siteconfig path that, potentially, changes every time the system
updates.
Fixes https://github.com/NixOS/nixpkgs/issues/29414.
Sometimes (especially in the default route case) it is required to NOT
add routes for all allowed IP ranges. One might run it's own custom
routing on-top of wireguard and only use the wireguard addresses to
exchange prefixes with the remote host.
Systemd is complaining that it can't delay the startup of device units.
We have a before dependency on the respective device unit for every
netdev service, which doesn't make any sense because we create the
actual interface in this service.
Previously, depending on the environment and the type of interface that
was created, the configured IPs of an interface wouldn't be applied on a
nixos-rebuild switch. It works after a reboot.
This patch ensures that the network-addresses service is started
either via the network-link service or if the networking target is
activated (i.e. on system activation).
Fixes#28474#16230.
* gnome3: only maintain single GNOME 3 package set
GNOME 3 was split into 3.10 and 3.12 in #2694. Unfortunately, we barely have the resources
to update a single version of GNOME. Maintaining multiple versions just does not make sense.
Additionally, it makes viewing history using most Git tools bothersome.
This commit renames `pkgs/desktops/gnome-3/3.24` to `pkgs/desktops/gnome-3`, removes
the config variable for choosing packageset (`environment.gnome3.packageSet`), updates
the hint in maintainer script, and removes the `gnome3_24` derivation from `all-packages.nix`.
Closes: #29329
* maintainers/scripts/gnome: Use fixed GNOME 3 directory
Since we now allow only a single GNOME 3 package set, specifying
the working directory is not necessary.
This commit sets the directory to `pkgs/desktops/gnome-3`.
- add flannel support
- remove deprecated authorizationRBACSuperAdmin option
- rename from deprecated poratalNet to serviceClusterIpRange
- add nodeIp option for kubelet
- kubelet, add br_netfilter to kernelModules
- enable firewall by default
- enable dns by default on node and on master
- disable iptables for docker by default on nodes
- dns, restart on failure
- update tests
and other minor changes
1. The chmod 400 with the preset cookie prevented restarts, as
on the second boot it would fail to write to the cookie. Oops.
2. As far as I can tell, sasl logs were disabled because of the
following error:
{error,{cannot_log_to_tty,sasl_report_tty_h,not_installed}}
Not because we actually wanted to disable them. This meant the
management plugin wasn't usable due to a bug set to be fixed in
3.7.0.
Add another option for debugging instead. Lots of users have been
complaining about this default behaviour.
This patch also cleans up the EFI bootloader entries in the ISO.
This has been broken nearly all the time due to the patches needed to
iproute2 not being compatible with the newer versions we have been
shipping. As long as Ubuntu does not manage to upstream these changes
so they are maintained with iproute2 and we don't have a maintainer
updating these patches to new iproute2 versions it is not feasible to
have this available.
This reverts commit 670b4e29adc16e0a29aa5b4c126703dcca56aeb6. The change
added in this commit was controversial when it was originally suggested
in https://github.com/NixOS/nixpkgs/pull/29205. Then that PR was closed
and a new one opened, https://github.com/NixOS/nixpkgs/pull/29503,
effectively circumventing the review process. I don't agree with this
modification. Adding an option 'resolveLocalQueries' to tell the locally
running name server that it should resolve local DNS queries feels
outright nuts. I agree that the current state is unsatisfactory and that
it should be improved, but this is not the right way.
(cherry picked from commit 23a021d12e8f939cd0bfddb1c7adeb125028c1e3)
Ensure that modules required by all declared fileSystems are explicitly
loaded. A little ugly but fixes the deferred mount test.
See also https://github.com/NixOS/nixpkgs/issues/29019
This includes fuse-common (fusePackages.fuse_3.common) as recommended by
upstream. But while fuse(2) and fuse3 would normally depend on
fuse-common we can't do that in nixpkgs while fuse-common is just
another output from the fuse3 multiple-output derivation (i.e. this
would result in a circular dependency). To avoid building fuse3 twice I
decided it would be best to copy the shared files (i.e. the ones
provided by fuse(2) and fuse3) from fuse-common to fuse (version 2) and
avoid collision warnings by defining priorities. Now it should be
possible to install an arbitrary combination of "fuse", "fuse3", and
"fuse-common" without getting any collision warnings. The end result
should be the same and all changes should be backwards compatible
(assuming that mount.fuse from fuse3 is backwards compatible as stated
by upstream [0] - if not this might break some /etc/fstab definitions
but that should be very unlikely).
My tests with sshfs (version 2 and 3) didn't show any problems.
See #28409 for some additional information.
[0]: https://github.com/libfuse/libfuse/releases/tag/fuse-3.0.0
The getty@.service unit already has an ExecStart so we cannot simply set a new
one in order to override it or we will get this error:
systemd[1]: getty@tty1.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.
Instead "reset" ExecStart by setting it to empty which is the systemd way of
doing it.
Currently the `rpc-gssd.service` has a `ConditionPathExists` clause that can
never be met, because it's looking for stateful data inside `/nix/store`.
`auth-rpcgss-module.service` also only starts if this file exists.
FixesNixOS/nixpkgs#29509.
When the user specifies the networking.nameservers setting in the
configuration file, it must take precedence over automatically
derived settings.
The culprit was services.bind that made the resolver set to
127.0.0.1 and ignore the nameserver setting.
This patch adds a flag to services.bind to override the nameserver
to localhost. It defaults to true. Setting this to false prevents the
service.bind and dnsmasq.resolveLocalQueries settings from
overriding the users' settings.
Also, when the user specifies a domain to search, it must be set in
the resolver configuration, even if the user does not specify any
nameservers.
(cherry picked from commit 670b4e29adc16e0a29aa5b4c126703dcca56aeb6)
This commit was accidentally merged to 17.09 but was intended for
master. This is the cherry-pick to master.
Previously services depending on network-online.target would wait until
dhcpcd times out if it was enabled and a static network address
configuration was used. Setting the default gateway statically is enough
for the networking to be considered online.
This also adjusts the relevant networking tests to wait for
network-online.target instead of just network.target.
