on the next stdenv-updates.
This would fix the build for many cmake packages, although that requires updating the stdenv
in those for its gcc to use this 2nd wrapper.
I updated paraview and avidemux. I can't recall now more packages with problems, but I was
quite sure there were.
If anyone sees a cmake-built package with the result binaries lacking some rpaths, then try
this wrapper.
svn path=/nixpkgs/trunk/; revision=20669
cross-building nixpkgs implementation, were not referenced anywhere.
This new busybox builds natively, and also cross-builds with uclibc.
I updated the uclibc config with a busybox defconfig requirement (something about RPC).
I made the gcc-cross-wrapper properly set the dynamic loader to programs.
After this, 'qemu-arm' can run the dynamically linked busybox cross built for armv5tel--linux-gnueabi.
svn path=/nixpkgs/trunk/; revision=20514
I introduce the new nixpkgs parameter "platform", defaulting to "pc",
which was before defined as an attribute of nixpkgs.
I made the crossSystem nixpkgs attribute set parameter contain its own 'platform'.
This allows cross-building a kernel for a given crossSystem.platform in a non-PC
platform.
The actual native platform can be taken from stdenv.platform, and this way we also
avoid the constant passing of 'platform' to packages for platform-dependant builds
(kernel, initrd, ...).
I will update nixos accordingly to these changes, for non-PC platforms to work.
I think we are gaining on flexibility and clearness. I could cross build succesfully
an ultrasparc kernel and a mipsel kernel on PC. But since this change, I should be able
to do this also in non-PC.
Before this change, there was no possibility of distinguishing the "target platform" or
the "native build platform" when cross building, being the single "platform" attribute
always interpreted as target platform.
The platform is a quite relevant attribute set, as it determines the linuxHeaders used
(in the case, by now the only one supported, of linux targets).
The platform attributes are quite linux centric still. Let's hope for more generality to come.
svn path=/nixpkgs/trunk/; revision=20273
because it makes linking very slow. Use bash's =~ operator instead
(and only once for each argument). We depend on bash already anyway
because of arrays so it's not a problem.
svn path=/nixpkgs/branches/stdenv-updates/; revision=19699
something'.
It should not link at least for '-x c-header' and '-x c++-header', and maybe
link for '-x c' or '-x c++', but we expect noone will be linking using these
later strings.
Adding opencv, which required '-x c-header' working, and that's why I have
updated gcc wrapper.
svn path=/nixpkgs/branches/stdenv-updates/; revision=19491
I fixed conflicts regarding the renaming 'kernel' -> 'linux' in all-packages.
Also a small conflict in all-packages about making openssl overridable.
And I some linux 2.6.31-zen kernel files also marked in conflict.
svn path=/nixpkgs/branches/stdenv-updates/; revision=19438
ghdl-wrapper.
I made the gcc-4.3.4 expression allow the 'vhdl' language through ghdl.
The ghdl developer recommends this gcc version; maybe it would work with
gcc-4.4. If not this ghdl version, maybe next versions.
svn path=/nixpkgs/branches/stdenv-updates/; revision=19071
broke the evaluation of nixpkgs.
I also tried to make the gnat wrapper friendly to any gnat installation, not
only gnatboot.
svn path=/nixpkgs/branches/stdenv-updates/; revision=19062
Some things don't work:
- The ghdl expression (it still needs the gcc 4.3.4 src, ...)
- The gnat wrappers need to be more generic - now they work only for the
given gnatboot (taken from gentoo) and gnats installed to their $out
store path.
- Using the cloogppl and ppl. We will need our own gnatboot built with c++
libraries for that.
svn path=/nixpkgs/branches/stdenv-updates/; revision=19060
sheevaplug kernel, so the kernel does not build in the sheevaplug right now.
I will try to fix that in next commits.
svn path=/nixpkgs/branches/stdenv-updates/; revision=19045
regexp looking for such ld arguments did not work well with "--soname=xxx.so".
Now I added the condition that the argument should not start with a hyphen, for
it to be possibly considered a .so file to link with.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18919
Removing any reference to the gcc-wrapper2, as now the gcc-wrapper already conveys
the changes, I created gcc-wrapper2 in trunk for.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18913
source regions which are substituded by the tool nix-repository-manager.
See http://github.com/MarcWeber/nix-repository-manager/raw/master/README.
sourceByName is called sourceFromHead now.
updates: MPlayerTrunk, haxe, neko, netsurf, cinelerra, ctags
cinelerra does no longer build due to Xorg update
svn path=/nixpkgs/trunk/; revision=18894
stdenv.
In this gcc-wrapper2 I made the ld-wrapper.sh to handle the linking with shared
objects through direct pass as ld command arguments of the absolute path to shared
objects, instead of using the -L/-l combinations.
cmake 'FindXXX.cmake' modules make a strong usage of the dynamic linking directly
passing the absolute path to the shared object to the linker, and as our wrapper did
not add any -rpath for those, writting the nix expressions for some cmake packages
resulted in a lot of tricks, compared to using this gcc-wrapper2.
This gcc-wrapper2/ld-wrapper.sh should become the gcc-wrapper/ld-wrapper in a
stdenv update.
I also updated some cmake expressions to use this gcc-wrapper2, and reduced its
tricks.
I also updated the cmake setup-hook for it to make cmake not touch any rpath decided
at build time, when running the 'make install' of makefiles created by cmake.
svn path=/nixpkgs/trunk/; revision=18885
renaming.
I think directory renaming breaks the usual merges... because it leaves the
'to be removed' directory in the working directory still. A manual 'rm' of the
'to be removed' directory fixed the commit.
svn merge ^/nixpkgs/trunk
svn path=/nixpkgs/branches/stdenv-updates/; revision=18661
native strip. So we now distinguish dontStrip and dontCrossStrip. I updated
the expressions for glibc-2.9 and glibc-2.11 accordingly.
I could get rid of the cross-glibc depending on the cross-gcc-stage-static.
Enabling nls in the final cross-gcc.
I still have problems on wint_t/wchar_t not working on cross build. Gettext
does not build.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18562
- Disabling guile test, because one fails. I commented on that in the source.
On cross builds:
- Adding stripping
- Updating the glibc-2.11 expression to match the parameters of glibc-2.9,
which I was updating more.
- Renaming from selfNativeBuildInput to selfBuildNativeInput, so this matches
better the pattern buildNativeInputs.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18550
- Before this changes, cflags and ldflags for the native and the cross compiler
got mixed. Not all the gcc-wrapper/gcc-cross-wrapper variables are
independant now, but enough, I think.
- Fixed the generic stdenv expression, which did a big mess on buildInputs and
buildNativeInputs. Now it distinguishes when there is a stdenvCross or not.
Maybe we should have a single stdenv and forget about the stdenvCross
adapter - this could end in a stdenv a bit complex, but simpler than the
generic stdenv + adapter.
- Added basic support in pkgconfig for cross-builds: a single PKG_CONFIG_PATH
now works for both the cross and the native compilers, but I think this
should work well for most cases I can think of.
- I tried to fix the guile expression to cross-biuld; guile is built, but not
its manual, so the derivation still fails. Guile requires patching to
cross-build, as far as I understnad.
- Made the glibcCross build to be done through the usage of a
gcc-cross-wrapper over the gcc-cross-stage-static, instead of using it
directly.
- Trying to make physfs (a neverball dependency) cross build.
- Updated the gcc expression to support building a cross compiler without getting
derivation variables mixed with those of the stdenvCross.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18534
- Stating better the guile dependencies (native/host) for guile to build
- Fixing cross-linking, through --rpath-link (ld(1) explains well about it
- Made gcc call the linker and the assembler through the gcc wrapper instead of
directly. I thought this was the source of missing -rpath's, but the source
of the problem ended up being the lack of --rpath-link. But I think the
native gcc calls the wrapped ld and as, so let's do the same cross
compiling.
- Removed the binutilsCross from the glibc expressions. Now they are built
using the gcc-cross-wrapper, and they were built with the direct gcc and
binutils before this change.
- I think patchelf and strip don't break the cross-compiled binaries, so I
reallow them on cross compilation.
- I disable the checkPhase on cross compilation. This made gmp and libtool
fail when cross compiled, iirc.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18498
linking path), and with this achieved bash being cross-compilable.
I fixed the few expressions involved in bash building, so they have well stated
native and non-native inputs.
I also tried to cross-build guile, and with this I found a problem in the
actual cross-gcc: it calls the binutils ld, instead of the ld wrapper. This
way, the programs/shared_libraries don't get the proper -rpath.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18497
derivation, the "buildInputs" in every stdenv mkDerivation don't map now
directly to the environment
variable "buildInputs" in the builder, but "buildNativeInputs". So, the inputs
build by the native compiler.
When cross compiling, they will map to the environment variable "buildInputs"
(yes, now the same name), which means does to be built with the cross compiler.
I think I improved the naming of variables a bit. There was a big mess,
specially in the stdenv adapter for cross building, and also in the default
builder script.
I also tried to add proper manager of propagatedInputBuilds, these being
propagated considering the host or build origin of that input build (so, at the
end, being those propagatedInputBuilds being propagated properly to the native
or the cross compiler.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18477
The `--depth' argument asks Git to fetch the last revisions of the given
repo on *any* branch, which is often useless.
Thanks to Lluís Battle for clarifying this.
svn path=/nixpkgs/trunk/; revision=18438
My idea is to provide special stdenv expressions that will contain in the path
additional cross compilers. As most expressions for programs accept a stdenv parameter,
we could substitute this parameter with the special stdenv, which will have a
generic builder that attempts the usual "--target=..." and can additionally
have an env variable like "cross" with the target architecture set.
So, finally we could have additional expressions like this:
bashRealArm = makeOverridable (import ../shells/bash) {
inherit fetchurl bison;
stdenv = stdenvCross "armv5tel-unknown-linux-gnueabi";
};
Meanwhile it does not work - I still cannot get the cross-gcc to build.
I think it does not fill the previous expressions with a lot of noise, so I
think it may be a good path to follow.
I only touched some files of the current stdenv: gcc-4.3, kernel headers
2.6.28, glibc 2.9, ...
I tried to use the gcc-cross-wrapper, that may be very outdated. Maybe I will
update it, or update the gcc-wrapper expression to make it fit the cross tools,
but meanwhile I even cannot build gcc, so I have not tested the wrapper.
This new idea on cross compiling is not similar to that of the
nixpkgs/branches/cross-compilation, which mostly added bare new expressions for
anything to be cross compiled, if I understood it correctly.
I cared not to break anything of the usual stdenv in all this work.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18343
I think it takes the recent N commits into the repository, which says very little,
even for wanting master/HEAD.
svn path=/nixpkgs/trunk/; revision=18277
This comes from:
svn diff ^/nixpkgs/trunk/@18255 ^/nixpkgs/branches/stdenv-updates/ > diff
patch -p0 < diff
and then adding into svn all files new from the patch.
trunk@18255 comes from the last time I updated stdenv-updates from trunk.
svn path=/nixpkgs/stdenv-updates2/; revision=18272
tree under $out into a separate stdenv adapter named keepBuildTree.
* makeModulesClosure: support building an initrd for a kernel that has
been compiled with coverage instrumentation.
svn path=/nixpkgs/trunk/; revision=16916
I thought I didn't change stdenv, but I did. This will go soon into the stdenv
branch then.
Reverse-merging r16467 through r16465.
svn path=/nixpkgs/trunk/; revision=16468
works on Red Hat Linux, i.e. that is based on glibc version 2.5.
Furthermore, this patch fixes a number of gcc 4.3.3 build errors in glibc 2.5
that occur on both x86 and x86_64. The older version of this library is still
useful for running Nix on a Red Hat host. Newer version of glibc fail to detect
the kernel's capabilities correctly (due to mad patches applied to the kernel
by Red Hat).
The individual changes are:
* Re-activated glibc 2.5 in all-packages.nix.
* Fix incomplete header search path in bootstrap tools.
Gcc-wrapper sets "-B<prefix>" to tell the compiler about its installation
root. Unfortunately, the setting doesn't add $gcc/lib/gcc/*/*/include-fixed
to the search path. That directory is required, however, because it contains
the system-specific "limits.h" file, and the glibc 2.5 builds tries to find
that file via #include_next.
* Support intrinsic functions like __signbit() or atof() correctly to avoid
compile-time conflicts.
* Switch to NPTL. Linuxthreads is no longer supported.
* Added a meta attribute to glibc package.
* Updated nixUnstable to version 0.13pre15614 from trunk. The previous version
failed regression tests.
* Fix more strict type checking in binutils since 2.18.50.0.3.
Without this patch, the build failed on x86, saying:
../sysdeps/i386/fpu/ftestexcept.c: Assembler messages:
../sysdeps/i386/fpu/ftestexcept.c:33: Error: suffix or operands invalid for `fnstsw'
svn path=/nixpkgs/branches/stdenv-updates/; revision=16037
* Added dsymutil to gcc wrapper env on darwin
* turned off make check for gnugrep on darwin
* added --enable-bsd=libs configure flag for gnugrep on darwin
svn path=/nixpkgs/trunk/; revision=16014
in the Nix expression evaluator (namely that comparison of attribute
sets works properly).
* Removed some redundant parentheses in builder-defs.
svn path=/nixpkgs/trunk/; revision=15551
modules for the initial ramdisk if there were no additional kernel
module packages (such as the NVIDIA driver or AUFS), leading to a
kernel panic in the initrd. This was because in that case modprobe
would print paths referring to the kernel path rather than the
module aggregation path, and then `sed "s^$kernel^$out^"' would
silently fail. Fixed.
* Also, use depmod here rather than doing sed hackery on modules.dep.
* Also, `allowMissing' was broken (missing "$" before the variable
name).
svn path=/nixpkgs/trunk/; revision=15394
builders. These are redundant now.
* Inlined some trivial builders.
* Removed a few explicit setup-hook creations. This is done
automatically now if setupHook is set.
* Deleted the initscripts package. NixOS doesn't use it anymore.
svn path=/nixpkgs/branches/stdenv-updates/; revision=15276
* setup.sh: removed some obsolete features, specifically some that
were only used by the old build farm.
* addToSearchPath: removed some parameters that weren't used
anywhere.
svn path=/nixpkgs/branches/stdenv-updates/; revision=15136
otherwise aclocal barfs. Updated the builder to use makeWrapper
* Made Automake 1.10 the default.
* Fixed `make check' in Automake by turning off indented logging in
Make (there is a flag for that now).
* Disabled the `make check' in Automake by default because it takes a
REALLY long time (e.g. more than 2 hours on Cygwin, 50 minutes on
Darwin, 25 minutes on Linux) which is a lot for a package that
otherwise takes 10 seconds to build. We can add a Hydra job with
doCheck enabled to do regression testing.
* make-wrapper: allow --run commands to add additional flags to the
invocation of the wrapped program. An example is the aclocal
wrapper: it adds additional -I ... flags.
* make-wrapper: call the wrapped program .foo-wrapped instead of
.wrapped-foo to make it easier to tell programs apart in `ps'
output.
svn path=/nixpkgs/branches/stdenv-updates/; revision=14885
* Added a function binaryTarball to do a DESTDIR build into
/usr/local. Useful for making statically linked binaries. However,
it may be better to do this in a VM (since if you do it in a Nix
build environment, you can still end up with a lot of Nix
dependencies in your binaries, even if you do static linking).
svn path=/nixpkgs/trunk/; revision=14726
instead of "gcc-4.3.3". This fixed the long-standing annoyance that
you can't distinguish the two in (say) nix-store -qR.
* On x86_64-linux, put $out/lib64 in the RPATH in addition to
$out/lib, because some packages (in particular GCC) put libraries in
$out/lib64 and ended up linking against the wrong library.
* Strip $out/lib64.
* Removed g77_42 because it's exactly the same as gfortran.
svn path=/nixpkgs/branches/stdenv-updates/; revision=14708
"*.tar.bz2 *.tar.gz" and there are no *.tar.gz files. Maybe we
should turn this on in stdenv (nullglob just seems like the right
thing to do in general).
svn path=/nixpkgs/trunk/; revision=14606
of Hydra builds more distinct (e.g. "patchelf-build-0.5pre1234"
instead of just "patchelf-build"). If the version isn't known,
append at least the revision.
* Propagate the release name of the source tarball to Nix builds.
Useful to provide sensible package names in channels.
svn path=/nixpkgs/trunk/; revision=14294
* Create some device nodes in the RPM/Deb disk images, since modern
distributions may not provide any device nodes (they're all
generated by udev).
svn path=/nixpkgs/trunk/; revision=14293
image, otherwise the post-installs script of the "passwd" package
will fail because /etc/login.defs is missing. This also fixes the
Ubuntu 8.10 image generation, woohoo!
svn path=/nixpkgs/trunk/; revision=14217
* Put the Glibc linker flags in front of the GCC linker flags. Needed
for the stdenv-linux bootstrap.
svn path=/nixpkgs/branches/stdenv-updates/; revision=13940
should fix previous problems with GCC 4.3 in compiling C++ code
where e.g. <cassert> has to appear before <assert.h> in the search
path due to the former's use of #include_next. The previous "fix"
broke compilation of C code by placing the C++ include directory
before the Glibc include directory (which would barf on
e.g. <complex.h>, which appears in both).
svn path=/nixpkgs/branches/stdenv-updates/; revision=13806
* checkinstall: get rid of the RUNPATH in the LD_PRELOAD library so
that it works with native Glibc (e.g. in VM builds).
* debBuild: use our own checkinstall. In particular this allows us to
build Debs on x86_64.
svn path=/nixpkgs/trunk/; revision=13608
we run into trouble on Fedora 10 (RPM 4.6), where the default is no
longer /usr/src/something but $HOME/something.
svn path=/nixpkgs/trunk/; revision=13466
by Pjotr Prins a while back. This could also be used to generate
RPMs for packages that don't have a spec-file.
* Added checkinstall to Nixpkgs. However we don't use our own build
yet because with it "make install" segfaults in a Debian VM, while
the pre-built binary does work.
svn path=/nixpkgs/trunk/; revision=13400
(e.g. making source tarballs, doing coverage analysis) to the
Nixpkgs tree. This makes it easier to run build farm jobs locally
since you don't need to check out the "release" tree separately.
Also it means one less input to declare for build farm jobs.
* Removed succeedOnFailure and separate logging of phases. Hydra
doesn't need that.
svn path=/nixpkgs/trunk/; revision=13388
* Updated Debian 4.0 to r4a. Dropped the revision ("r3", "r4a") from
the attribute name since Debian doesn't seem to keep old revisions
available anyway.
svn path=/nixpkgs/trunk/; revision=12849
for userspace networking / Samba again.
* vmtools: use KVM 74 and Linux 2.6.26, and use virtio for networking
/ disk access.
svn path=/nixpkgs/trunk/; revision=12768
fetchurl instantiations, instead of passing the mirrors to fetchurl
instantiations via environment variables. This makes the resulting
store derivations (.drv files) much smaller, which in turn makes
nix-env/nix-instantiate faster (4.8 -> 4.2 seconds on nix-env -qa
--out-path).
svn path=/nixpkgs/trunk/; revision=12695
* An attribute `stdenv_32bit' that returns a stdenv capable of
building 32-bit binaries.
* grub: build on x86_64-linux.
svn path=/nixpkgs/trunk/; revision=12211
libstdc++ headers in the header search path, otherwise libstdc++'s
use of #include_next to include Glibc headers breaks.
svn path=/nixpkgs/trunk/; revision=12195
* rss-glx: fixed the build.
* Removed the OpenGL wrapper stuff, it's no longer needed (thanks to
the RUNPATH you just need to put the appropriate libGL.so in the
LD_LIBRARY_PATH).
svn path=/nixpkgs/trunk/; revision=12093
image (i.e., it can contain any OS that obeys the interface
documented in the comment). See `testFreeBSD' for an example that
performs a build of the ATerm library on FreeBSD 7.0. This will be
used in the build farm to perform builds for platforms for which we
cannot synthesize VM images automatically.
svn path=/nixpkgs/trunk/; revision=11753
* In addition to the `diskImages' set, there now is a `diskImageFuns'
set that holds functions to build a disk image for a specific
distribution, given a list of names of top-level packages that
should be included in the image. This makes it easier to customise
an image (e.g. if you want to build an RPM in an image with some
very specific dependencies that aren't in the default image).
* Added Fedora 6.
svn path=/nixpkgs/trunk/; revision=11513
expression for a Debian closure automatically (so that we don't have
to remember to regenerate those files ourselves). The `import
<derivation>' feature generally shouldn't be used in Nixpkgs, but
since it's only used in the buildfarm it should be fine.
svn path=/nixpkgs/trunk/; revision=11512
from the "primary.xml.gz" file of Fedora and OpenSUSE distributions.
Analogous to the Deb closure generator.
* Image for Fedora 8.
svn path=/nixpkgs/trunk/; revision=11510
- fetchdarcs_2pre added
- flapjax added
- no longer used : annotatedDerivations
- added bleeding edge repos with a tiny nix repository manager which dowloads and
updates repostiries, then creates tar.gz dist files which are used by bleeding_edge_source
(darcs tested only by now)
- added experimental my_environment with example
svn path=/nixpkgs/trunk/; revision=10974
- fetchdarcs_2pre added
- flapjax added
- no longer used : annotatedDerivations
- added bleeding edge repos with a tiny nix repository manager which dowloads and
updates repostiries, then creates tar.gz dist files which are used by bleeding_edge_source
(darcs tested only by now)
- added experimental my_environment with example
svn path=/nixpkgs/branches/stdenv-updates/; revision=10973
merge cleanly right away (kde-4, kernel stuff) so it should be
merged later. But the stdenv stuff is all there.
svn path=/nixpkgs/branches/stdenv-updates-merge/; revision=10793
This is so that the Unison wrapper can be generated with
makeWrapper.
* Use makeWrapper as a buildInput everywhere.
* Updated BitTorrent, cvs2svn.
svn path=/nixpkgs/trunk/; revision=10213
a wrapper script. E.g.
wrapProgram $out/bin/prog --set FOO bar
will create a wrapper around "prog" so that the environment variable
FOO is set to bar. The original program is renamed to
$out/bin/.wrapped-prog.
* Function makeSetupHook to convert a script into a setup hook which
can be included in buildInputs. This makes it easier to use scripts
like makeWrapper.
* Added Bazaar, yet another distributed version management system.
svn path=/nixpkgs/trunk/; revision=10211
mirror:// sites through environment variables, e.g.
NIX_MIRRORS_gnu="ftp://ftp.nluug.nl/pub/gnu/ ftp://ftp.gnu.org/pub/gnu/"
or
NIX_MIRRORS_sourceforge="http://surfnet.dl.sourceforge.net/sourceforge/"
svn path=/nixpkgs/trunk/; revision=9302
fetchurl {
url = http://heanet.dl.sourceforge.net/sourceforge/zapping/zapping-0.9.6.tar.bz2;
md5 = "8306775c6a11de4d72345b5eee970ea6";
};
you can write
fetchurl {
url = mirror://sourceforge/zapping/zapping-0.9.6.tar.bz2;
md5 = "8306775c6a11de4d72345b5eee970ea6";
};
which causes fetchurl to try the SourceForge mirrors listed in the
`sourceforge' attribute in build-support/fetchurl/mirrors.nix.
(They're currently tried in sequence, and the lists of mirrors are
not configurable yet.)
The syntax for mirror URLs is mirror://site/path/to/file, where
`site' is currently one of `sourceforge', `gnu' (mirrors of
ftp://ftp.gnu.org/pub/gnu) and `kernel' (mirrors of
http://www.all.kernel.org/pub/).
svn path=/nixpkgs/trunk/; revision=9197
fetching a file with hash HASH of type TYPE, we first try to
download <base-url>/<type>/<hash>, where <base-url> is one of a list
of mirrors. For instance, given
src = fetchurl {
url = http://releases.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.6/source/firefox-2.0.0.6-source.tar.bz2;
sha1 = "eb72f55e4a8bf08e8c6ef227c0ade3d068ba1082";
};
and the mirror list [http://nix.cs.uu.nl/dist/tarballs], we first
try to download
eb72f55e4a
and if that fails, we use the original URL.
The list of mirrors is not yet user-configurable.
* `fetchurl' now also accepts an argument `urls' instead of `url' for
a list of alternative download locations, which fetchurl will try in
sequence.
svn path=/nixpkgs/trunk/; revision=9190
can be installed in a user environment without conflict. This is
useful if you need gcov (which isn't symlinked in the GCC wrapper).
svn path=/nixpkgs/trunk/; revision=8809
to the gcc invocation.
If we pass a flag like -Wl, then gcc will call the linker unless it
can figure out that it has to do something else (e.g., because of a
"-c" flag). So if no non-flag arguments are given, don't pass any
linker flags. This catches cases like "gcc" (should just print
"gcc: no input files") and "gcc -v" (should print the version).
svn path=/nixpkgs/trunk/; revision=8644
* Removed substitute, it's part of the generic builder now.
* stdenv-initial (Linux): use the real generic builder script. This
does require that sed is in the path of the builder of the initial
stdenv.
svn path=/nixpkgs/trunk/; revision=7498
* If the environment variable buildCommand is set, then eval that
instead of doing the build phases. This is used by the runCommand
function in all-packages.nix to allow one-lines like
foo = runCommand "foo" {} "mkdir $out; echo foo > $out/foo";
svn path=/nixpkgs/trunk/; revision=7298
`@var@' in the file `src', writing the result to $out, where `var'
is any environment variable starting with a lowercase character.
Example:
genericSubstituter {
src = ./file;
foo = "bla";
shell = bash + "/bin/sh";
};
will replace `@foo@' with `bla' and `@shell@' with
`/nix/store/...-bash-.../bin/sh'.
svn path=/nixpkgs/trunk/; revision=6928
we use the GCC wrapper in a user environment, the wrong assembler
will be called. This is not usually a problem, but sometimes it is
(e.g., when using G++ 4.1.1 with binutils 2.16 or so).
svn path=/nixpkgs/trunk/; revision=6862
Glibc. This is useful when building GCC.
* gcc-wrapper: the dynamic linker has a different name on x86_64 and
powerpc.
* gcc-wrapper: "glibc" -> "libc", because someday we might support
different C libraries.
* gcc: don't do a multilib build (e.g., 32-bit support on x86_64),
don't need it.
* gcc: merge in support for static builds.
* gcc: various simplifications in the compiler/linker flags, hope they
work.
svn path=/nixpkgs/trunk/; revision=6823
contains arbitrary information about a package, like this:
meta = {
homepage = "http://gcc.gnu.org/";
license = "GPL/LGPL";
description = "GNU Compiler Collection, 4.0.x";
};
The "meta" attribute is not passed to the actual derivation
operation, so it's not a dependency --- changes to "meta" attributes
don't trigger a recompilation.
Now we have to standardise some useful attributes ;-)
svn path=/nixpkgs/branches/usability/; revision=5024
Even though you could just inherit binutils it is conceptually cleaner (I
think) to make these tools available here.
svn path=/nixpkgs/trunk/; revision=4967
* added an experimental fetchdarcs function, based on fetchsvn
(there are no expressions yet that use this function)
svn path=/nixpkgs/trunk/; revision=4615
in /usr/lib/libGL.so.1 (which will typically load a driver in
/usr/X11R6/lib/modules/dri). This has been tested on a i915
graphics card; it should work with most open source X.org drivers.
For NVidia's proprietary drivers (which we cannot build ourselves
anyway), some more symlinks are necessary; I'll add those later.
So to get hardware-accelerated Quake 3, do:
$ nix-env -p /nix/var/nix/profiles/opengl -i xorg-sys-opengl
$ nix-env -i quake3-demo
$ quake3
svn path=/nixpkgs/trunk/; revision=4613
allow the OpenGL implementation to be overriden through the
OPENGL_DRIVER environment variable. If it is not set, we use the
implementation installed in the profile
/nix/var/nix/profiles/opengl, allowing easy late binding by the
user, e.g.,
$ nix-env -p /nix/var/nix/profiles/opengl -i nvidia-sys-opengl
might install the NVidia OpenGL implementation.
The code that does this is not specific to Quake 3: it has been
factored out into build-support/opengl/mesa-switch.sh. Presumably
any application that requires hardware-accelerated OpenGL needs it.
* Add the Quake 3 demo to the cache.
svn path=/nixpkgs/trunk/; revision=4612
server's certificate. This is perfectly safe: we don't care whether
the server is being spoofed --- only the cryptographic hash of the
output matters.
svn path=/nixpkgs/trunk/; revision=4377
right thing. This is necessary to make libtool detect g++
properly. (Fixes the `libtool: compile: unable to infer tagged
configuration' error on FreeBSD when building Berkeley DB 4.4.)
svn path=/nixpkgs/trunk/; revision=4370
* Use the system Perl on all non-i686-linux platforms.
* Don't build Python support in libxml2 on most platforms.
svn path=/nixpkgs/trunk/; revision=3019
`*.dll.config' files corresponding to CLR assemblies. I.e., the
full path to native libraries is included in the maps. In effect
this allows us to set the equivalent of an RPATH for assemblies.
* gtk-sharp: use the DLL fixer. It's not perfect yet: I still have to
set the LD_LIBRARY_PATH for monodoc to include the gtk-sharp lib
directory itself, so that it can find the `*sharpglue.so' files.
This seems to be gtk-sharp's fault; it doesn't have an entry for
those libraries in its DLL maps.
svn path=/nixpkgs/trunk/; revision=2330
this contains mostly Armijn's pure stdenv-linux.
* After unpacking the statically linked GCC, patch all store paths to
/nix/store/ffffffffffffffffffffffffffffffff. Ugly hack to prevent
undeclared references but it works.
* We don't need Glib's dynamic libraries in the first bootstrap stage;
delete them. Actually the downloaded Glibc binary is only needed
for building Glibc, since GCC needs a C compiler to build some
programs in `configure'. So static linking is fine for that. Maybe
it would be better to patch `configure' so that we don't need a
pre-built Glibc at all.
* Set the svn:executable property on `cp' and `patchelf'.
* In Glibc, revert to LinuxThreads. Maybe NPTL will work, but TLS
support is a problem.
* Delete most Glibc patches; they're no longer needed since the branch
updated it to 20050110.
* Some cleanups.
svn path=/nixpkgs/trunk/; revision=2258
files easier. Examples:
substitute inputFile outputFile \
--replace "@bindir@" "$out/bin" \
--replace "@gcc@" "$GCC/bin/gcc"
substitute inputFile outputFile --subst-var out
(this is sugar for --replace "@out@" "$out")
substituteInPlace file --replace a b
(input and output are both `file'; the execute bit is preserved)
svn path=/nixpkgs/trunk/; revision=2239
the tree being fetched from a Subversion repository. The revision
number is now optional (and defaults to HEAD).
This makes `fetchsvn' more pure. First, a URL/revision tuple does
not uniquely identify a file resource, since the repository itself
might change. Second, `svn:external' attributes can cause arbitrary
resources to be exported.
A script `nix-prefetch-svn' has been provided to determine the hash
of a URL.
svn path=/nixpkgs/trunk/; revision=938
