Commit 0055c6a introduced a new preConfigure hook that sets the right
qmake path. Unfortunately the mkDerivation attributes of cool-retro-term
override the whole configurePhase, so this hook isn't run at all.
This fixes the build of cool-retro-term and it now successfully compiles
on my machine.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Built and tested locally.
From the changelog:
```
Version 0.7.84, 2016-03-31
x #I122, MPEG-4/MOV: Crash if mdhd timescale is 0
x MPEG-4/MOV: Infinite loop if malformed stsc / stsz (detected by
fuzzing)
x MPEG-TS: some DVB Subtitles were not detected
x HLS: better handling of media playlists having EXT-X-BYTERANGE
```
The openimageio dependency doesn't build on i686. But probably nobody
cares about running Blender on 32-bit anymore.
http://hydra.nixos.org/build/33602734
Note: the 1.2.9 GitHub tarball's sha256 has changed.
Changes:
- Fixed an issue introduced by the fix for 1196 that had the "Upload
to SD" button stop working correctly.
- Fixed an issue causing an error on disconnect after or cancelling of
an SD print, caused by the unsuccessful attempt to record print
recovery data for the file on the printer's SD card.
- Only add bed temperature line to temperature management specific
start gcode in CuraEngine invocation if a bed temperature is actually
set in the slicing profile.
- If a communication timeout occurs during an active resend request,
OctoPrint will now not send an M105 with an increased line number
anymore but repeat the last resent command instead.
- Don't add an extra ok for M28 response.
- Add an extra ok for M29 response, but only if configured such in
"Settings" > "Serial" > "Advanced options" > "Generate additional ok
for M29"
- Trigger M20 only once after finishing uploading to SD
- Prevent M105 "cascade" due to communication timeouts
- Fixed wrong tracking of extruder heating up for M109 Tn commands in
multi-extruder setups.
- Fixed start of SD file uploads not sending an M110.
- Fixed job data not being reset when disconnecting while printing.
Built and tested locally.
From the changelog:
```
Version 0.7.83, 2016-02-29
+ HEVC: Maximum Content Light Level (MaxCLL) and Maximum Frame-Average
Light Level (MaxFALL), metadata mandated by CEA-861.3 for HDR support
+ HEVC: Mastering display color primaries and luminance (based on SMPTE
ST 2084), metadata mandated by CEA-861.3 for HDR support
+ HEVC: SMPTE ST 2048 and SMPTE ST 428-1 transfer characteristics
+ HEVC: Chroma subsampling location (indication of the location type
described in the HEVC spec)
+ MPEG-TS: ATSC Modulation Mode (Analog, SCTE_mode_1 aka 64-QAM,
SCTE_mode_2 aka 256-QAM, 8-VSB, 16-VSB)
+ #B981, MP4: support of buggy file having "hint" SubType
x HLS: better handling of media playlists having EXT-X-BYTERANGE
```
Additionally, some cleanup and package uses `autoreconfHook` now. Thanks
to @hrdinka for helpful pointers!
All the programs provided by ncurses were being installed to the $dev
output, but several of them are intended for runtime use, e.g. to
operate on the running terminal. These user-facing programs are moved to
the $bin output.
Several packages referred to "${ncurses}/bin" or "${ncurses.dev}/bin" at
runtime; these paths are also updated to refer to "${ncurses.bin}/bin".
The following parameters are now available:
* hardeningDisable
To disable specific hardening flags
* hardeningEnable
To enable specific hardening flags
Only the cc-wrapper supports this right now, but these may be reused by
other wrappers, builders or setup hooks.
cc-wrapper supports the following flags:
* fortify
* stackprotector
* pie (disabled by default)
* pic
* strictoverflow
* format
* relro
* bindnow
`*.desktop` file now:
- Refers to an icon.
- Is placed in the proper category (based on comparison with `keepassx2`.
- Has proper mime type (also based on comparison).
Also, now use `icoutils` to extract icons from the application ressouces
and transform them from `*.ico` to `*.png`. Created and used a generic
script that has the ability to move the extracted `*.png` to their
appropriate standard freedesktop location.
Tested this on nixos. `keepass` now has a icon and is categorized
in the same bin as `keepassx2`. The program still execute and
function prefectly.
- Replace non freedesktop `CAD` desktop category
by categories taken from debian's desktop item.
This make the desktop items appear under the
`Graphic` category in DE menus instead of `Others`.
- Moved to new package icons as specified by
upstream release notes.
- Moved to icon name instead of full path to
a single icon as specified by freedesktop
specification.
- Human readable desktop item names.
Built and tested locally.
From the changelog:
```
Version 0.7.82, 2016-01-27
+ Matroska: CRC-32 validation
+ Matroska: support of padding/junk at the start of a segment
+ Matroska: trace is activated for all elements (but report is still
based on the first element met)
+ Matroska: add an intermediate level in the trace for the raw stream
parser
x FLV: potential infinite loop fixed
x #B966, DTS: DTS-HD HR 3840 not detected anymore
x AC-3: wrong sample rate with 32 kHz streams
x #B948, EBUCore 1.6: invalid output due to position of
containerEncoding element
x #B957, MPEG-7 output: No XML encoded value output
```
changes by @globin:
* added pulseaudio support
* 06-02-2016 -> 2016-02-06 to ensure correct version sorting
* cli_visualizer -> cli-visualizer
closes#12853
Signed-off-by: Robin Gloster <mail@glob.in>
vcunat's comments:
Unused parameter got removed.
CLI looks good now but the GUI still won't work with:
bin/..solaar-wrapped-wrapped:45: PyGIWarning:
Gtk was imported without specifying a version first.
Use gi.require_version('Gtk', '3.0') before import to ensure that the right version gets loaded.
solaar.gtk.main()
solaar: error: Argument 0 does not allow None as a value
is extended using patches http://tools.suckless.org/dmenu/patches/ this
argument makes it easier to extend dmenu by doing:
dmenu.overwritte {
patches = [
./dmenu-4.4-follow-focus.diff";
];
};
I didn't see nice patches to apply,
so I exchanged the whole source (-> autoreconf).
/cc maintainer: k0ral. BTW, it's practical to have the maintainers attribute
match the github name exactly so that people know how to /cc you.
Built and run locally.
From the Changelog:
```
Version 0.7.81, 2015-12-31
+ Acquisition Metadata: support of all SMPTE RDD18 elements
+ Matroska: cover presence and content of the cover, thanks to Max Pozdeev
+ #F446, Matroska: Handling of cropping values, thanks to Max Pozdeev
+ Improvement of Python binding: Mac Os X support, Python2 and Python3
can use same MediaInfoDLL.py
+ #F484, AVI: OpenDML Interlaced / Progressive scan type detection
+ MP4: support of AtomicParsley imdb tag
x #B959, MPEG-TS: MPEG-1 Video appeared as MPEG-2 Video
x #B914, Matroska: Undefined number of chapters in some M4V with Timed
Text, thanks to Max Pozdeev
x #B962, Matroska: negative timecodes were not correctly handled
x #B964, FLV: was hanging trying to open some FLV files
x JPEG in AVI or MOV: better handling of buggy APP0/AVI1, avoiding some
false positives about interlacement
x DVCPRO HD: some containers consider DVCPRO HD as with width 1920
despite the fact it is 1280 or 1440, using 1280 or 1440 in all cases
```
Changes:
- Add option preserve for gamma adjustment methods (randr, vidmode,
quartz, w32gdi) to apply redness on top of current gamma
correction.
- Fix#158: Add redshift.desktop file to resolve an issue where
Geoclue2 would not allow redshift to obtain the current location.
- Fix#263: Make sure that the child process is terminated when
redshift-gtk exits.
- Fix#284: A sample configuation file has been added to the
distribution tarball.
- Fix warning message in redshift-gtk that is some cases caused
redshift-gtk to fail (#271)
- Fix#174: Use nanosleep() for sleeping to avoid high CPU load on
platforms (NetBSD, ...) with limitations in usleep()
- Various updates to man page and translations.
This improves our Bundler integration (i.e. `bundlerEnv`).
Before describing the implementation differences, I'd like to point a
breaking change: buildRubyGem now expects `gemName` and `version` as
arguments, rather than a `name` attribute in the form of
"<gem-name>-<version>".
Now for the differences in implementation.
The previous implementation installed all gems at once in a single
derivation. This was made possible by using a set of monkey-patches to
prevent Bundler from downloading gems impurely, and to help Bundler
find and activate all required gems prior to installation. This had
several downsides:
* The patches were really hard to understand, and required subtle
interaction with the rest of the build environment.
* A single install failure would cause the entire derivation to fail.
The new implementation takes a different approach: we install gems into
separate derivations, and then present Bundler with a symlink forest
thereof. This has a couple benefits over the existing approach:
* Fewer patches are required, with less interplay with the rest of the
build environment.
* Changes to one gem no longer cause a rebuild of the entire dependency
graph.
* Builds take 20% less time (using gitlab as a reference).
It's unfortunate that we still have to muck with Bundler's internals,
though it's unavoidable with the way that Bundler is currently designed.
There are a number improvements that could be made in Bundler that would
simplify our packaging story:
* Bundler requires all installed gems reside within the same prefix
(GEM_HOME), unlike RubyGems which allows for multiple prefixes to
be specified through GEM_PATH. It would be ideal if Bundler allowed
for packages to be installed and sourced from multiple prefixes.
* Bundler installs git sources very differently from how RubyGems
installs gem packages, and, unlike RubyGems, it doesn't provide a
public interface (CLI or programmatic) to guide the installation of a
single gem. We are presented with the options of either
reimplementing a considerable portion Bundler, or patch and use parts
of its internals; I choose the latter. Ideally, there would be a way
to install gems from git sources in a manner similar to how we drive
`gem` to install gem packages.
* When a bundled program is executed (via `bundle exec` or a
binstub that does `require 'bundler/setup'`), the setup process reads
the Gemfile.lock, activates the dependencies, re-serializes the lock
file it read earlier, and then attempts to overwrite the Gemfile.lock
if the contents aren't bit-identical. I think the reasoning is that
by merely running an application with a newer version of Bundler, you'll
automatically keep the Gemfile.lock up-to-date with any changes in the
format. Unfortunately, that doesn't play well with any form of
packaging, because bundler will immediately cause the application to
abort when it attempts to write to the read-only Gemfile.lock in the
store. We work around this by normalizing the Gemfile.lock with the
version of Bundler that we'll use at runtime before we copy it into
the store. This feels fragile, but it's the best we can do without
changes upstream, or resorting to more delicate hacks.
With all of the challenges in using Bundler, one might wonder why we
can't just cut Bundler out of the picture and use RubyGems. After all,
Nix provides most of the isolation that Bundler is used for anyway.
The problem, however, is that almost every Rails application calls
`Bundler::require` at startup (by way of the default project templates).
Because bundler will then, by default, `require` each gem listed in the
Gemfile, Rails applications are almost always written such that none of
the source files explicitly require their dependencies. That leaves us
with two options: support and use Bundler, or maintain massive patches
for every Rails application that we package.
Closes#8612
vcunat did some cosmetic changes, such as joining lines
because we seem to rarely use one-identifier-per-line style,
or fixing hyena description to conform to our rules.
From the changelog:
```
Version 0.7.80, 2015-11-30
+ Matroska: support of MKVMerge statistics tags (duration frame count,
stream size, bit rate) per track, thanks to ndjamena
+ FLAC: Channel positions, thanks to ndjamena
+ FLAC: difference between detected bit depth and stored bit depth
+ MPEG-TS: if DTVCC transport stream is present and no DTVCC service
descriptor, scan also in the middle of the file in order to detect
more caption services
+ Subtitle frame rate computing if frame count and duration are
available (hidden by default)
+ Subtitles in Matroska: count of elements
+ Matroska, MXF and MP4/MOV: detection of truncated files
+ DTS: difference between ES Matrix and ES Discrete
+ DTS: display ES Matrix or ES Discrete even if HRA or MA is present
+ DTS: difference between DTS-HRA with 96k option and pure DTS-96/24
+ DTS: detection of DTS:X
+ Samples per frame info
+ AC-3: detection of Atmos inside TrueHD
+ Video frame rate: showing precision of 1/1.001 frame rates (e.g.
"23.976 (24000/1001) fps" and "23.976 (23976/1000) fps")
+ MPEG-4/MOV: showing the complete list of compatible brands in the
CodecID field
+ MPEG-4/MOV: Alternate groups
+ MPEG-4/MOV: "Disabled" tag
+ MPEG-4/MOV: "Forced" tag
+ MPEG-4/MOV: showing links between tracks (chapters for, subtitles for,
fallback for)
+ MXF: handling of more acquisition metadata items
+ MXF: Package name
+ AVC: Store method of interlaced content (Interleaved Fields or
Separated Fields)
+ EBUCore: acquisition metadata (Proof of concept, for feedback only)
x Matroska: frame rate detection algorithm revisited, less wrong numbers
are expected
x SDP/Teletext: some pages were sometimes (when present in 2 different
SDP lines) displayed several times
x MPEG-4/MOV: some hint tracks were not displayed
+ Hongkongese language added
+ Option "Full parsing"
```
I've removed the trivial command in 4e72b61de.
I think `install -Dt "$out/bin"` is a better replacement anyway,
as it can be easily used to other directories than $out/bin.
/cc @ehmry who seems to maintain many packages with this usage.
(BTW, it would be better to have maintainer attribute same as github
username, as it makes pinging maintainers much easier.)
The most complex problems were from dealing with switches reverted in
the meantime (gcc5, gmp6, ncurses6).
It's likely that darwin is (still) broken nontrivially.
Following a commit by @k0ral, this completes the upgrade of the other
`mediainfo` components.
From the changelog:
```
Version 0.7.79, 2015-11-02
+ CLI/DLL only, XML: new option --Output=MIXML, with XML v2.0beta1
status, not for production, see
https://github.com/MediaArea/MediaAreaXml for more details
+ MediaTrace: support of more than 1 file in XML output.
+ CLI/DLL only, XML: new option --Output=MAXML, with XML v0.1 status, in
order to have bot MediaInfo and MediaTrace in the same output, not for
production, see https://github.com/MediaArea/MediaAreaXml for more
details
x MediaTrace: fixed some invalid outputs
x #B951, Amazon S3 support (REST API v2), CLI/DLL only and if compiled
with libcurl support: URL without credential were badly interpreted
```
Paste from the changelog:
There have been a lot of changes. Here are the highlights:
* Improved command line parser: terminator -- handling, UUID
recognition, DOM recognition, red-herring pairs (foo:bar), escaped
slashes in patterns (/one\/two/), substitutions (/one\/two/one-two/),
Unicode U+NNNN and \uNNNN, escaped entities (\n, \t etc) for use in
descriptions/annotations, abbreviated day and month names, ISO-8601
durations (PT4H, P1Y etc).
* New virtual tags UDA, ORPHAN, PROJECT, PRIORITY, and LATEST.
* Improved support for DOM references in filters task
'due.year = 2015 and due.week > 20' list.
* New configuration settings urgency.inherit, rule.color.merge,
urgency.user.tag.next.coefficient, color.uda.<name>.none, sugar,
report.<name>.sort:none, json.depends.array.
* Improved urgency: the urgency.inherit setting propagates urgency
along dependency chains.
* Improved searching: more powerful regular expressions.
* Improved attribute modifiers: is/isnt are now consistent exact
match operator equivalents to ==/!==.
* New command _unique, for generating unique lists of values, and
will ultimately replace several helper commands.
* New command commands, which lists commands and details about how
they affect filters, GC, context, and syntax.
* New verbosity tokens recur (feedback when a recurring task instance
is created), unwait (for when a waiting task becomes visible).
* Improved extensions: zsh completion, Fish shell completion, add-on
scripts now online.
* Improved documentation: help command, man pages, more online docs,
negation ! operator, sample hook scripts.
* Improved sync: GnuTLS now mandatory, so everyone has the sync
command.
* Improved JSON import/export support: free-format JSON, task arrays
assumed (which makes import/export work with out-of-the-box parsers),
dependencies optionally modeled as an array, UUIDs validated, tasks
added/updated without duplication, import from STDIN using -.
* Improved performance: less data is read from disk depending on the
filter.
* Improved diagnostics: duplicate dependency warnings, multi-task
edit failures, changes to tasks without IDs, certificate file sizes.
* Improved testing: migrated all Perl tests to Python, parallelized
test suite, colorized output, detection of newly passing tests,
Python 2.7 and 3 support, better debug output, Bash test library,
stress test tool, no more disabled tests - everything runs, test
coverage is now 87.3%.
* Widespread code cleanup, removal of dead code, C++11 enhancements,
improved portability, merged ISO-8601 and legacy durations, less
code, happier developers.
Built and run locally.
From the Changelog:
```
Version 0.7.78, 2015-10-02
+ MOV: AVrp CodecID support
+ Video Stored_Width/Stored_Height and Sampled_Width/Sampled_Height
added (hidden by default)
+ Speed optimization for the parsing of tiny files e.g. JPEG files
+ Option (command line / DLL) --Legacy=0 for disabling some legacy fields
+ Option (command line / DLL) --Output=MAXML, XML with MediaInfo and
MediaTrace output together, technology preview (not for production)
x MPEG-TS: Teletext and Teletext Subtitle were missing in the menu list
x Chroma subsampling "4:4:4" was sometimes indicated for RGB, which is
not useful
```
The build can loop forever generating an infinite amount of log data,
filling up Hydra's disk:
gcc -Llib -L/nix/store/0xb56zcqii361ksknjwh9m853zb886yq-glib-2.46.0/lib -L/nix/store/48hidn50ynp4kk4lsfzjvkbg30yhfgaq-gdk-pixbuf-2.32.0/lib -L/nix/store/dfxv36h389wvkblv3qjgfs2zyklgdlp4-cairo-1.14.2/lib -L/nix/store/wy5f8alalh681jbq3hjh93rcc87d6nch-freetype-2.5.4/lib -L/nix/store/b6kaw1i6fadgssn38xv4rkfsa7q70rfa-fontconfig-2.11.1/lib -L/nix/store/9n1ynjgcmxlhz75l1mnd07zb0pkgvpzi-gtk+-2.24.28/lib -L/nix/store/782agz0g2hn4n02a23vsaly2sr1kwxhd-pango-1.38.0/lib -L/nix/store/ljalzp7gjv76bqbxm6ia3vmw3vhfambr-atk-2.18.0/lib -L/nix/store/pkssk6q14y17q9jji5q5gk70sf3hz6hs-poppler-glib-0.34.0/lib obj/emPdfServerProc.o -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangoft2-1.0 -lpango-1.0 -lfontconfig -lfreetype -lpoppler-glib -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lcairo
-lm -o lib/emPdf/emPdfServerProc
/nix/store/kxf1p7l7lgm6j5mjzkiwcwzc98s9f1az-binutils-2.23.1/bin/ld: cannot find -lcairo
collect2: error: ld returned 1 exit status
---
Building emPdf failed, but that project is not so essential.
So if you don't know how to solve the problem, then you could
continue the overall building now, and live without the features
the project provides. Continue? [y(es)/n(o)/a(lways)]: Use of uninitialized value $ln in pattern match (m//) at make.pl line 626.
Use of uninitialized value $ln in pattern match (m//) at make.pl line 629.
Use of uninitialized value $ln in pattern match (m//) at make.pl line 632.
Use of uninitialized value $ln in pattern match (m//) at make.pl line 636.
Say yes, no or always: Use of uninitialized value $ln in pattern match (m//) at make.pl line 626.
Use of uninitialized value $ln in pattern match (m//) at make.pl line 629.
Use of uninitialized value $ln in pattern match (m//) at make.pl line 632.
Use of uninitialized value $ln in pattern match (m//) at make.pl line 636.
...
@viric
http://hydra.nixos.org/build/26505594
Upstream changes to the build system required adjusting many packages'
dependencies. On the Nixpkgs side, we no longer propagate the dependency
on cmake (to reduce closure size), so downstream dependencies had to be
adjusted for most packages that depend on kdelibs.
You can now pass
separateDebugInfo = true;
to mkDerivation. This causes debug info to be separated from ELF
binaries and stored in the "debug" output. The advantage is that it
enables installing lean binaries, while still having the ability to
make sense of core dumps, etc.
This seems to have been confusing people, using both xlibs and xorg, etc.
- Avoided renaming local (and different) xlibs binding in gcc*.
- Fixed cases where both xorg and xlibs were used.
Hopefully everything still works as before.
