This adds the pinns path to the configuration let CRI-O start properly.
We also change the configuration to the new drop-in syntax.
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
If `qemu-vm.nix` is imported, the option `virtualisation.qemu.consoles`
should be set to make sure that the machine's output isn't rendered on
the graphical window of QEMU.
This is needed when interactively running a NixOS test or in conjunction
with `nixos-build-vms(8)`.
The patch 2578557530 tries to only do this
if the option actually exists, however this condition used to be always
false since `options` wasn't imported in the module and pointed to
`lib.options` due to the `with lib;`-clause.
This makes the notification script use the subject generated by smartmontools
itself both for consistency with other distros and to include the hostname.
In some tests, e.g. -f nixos/release.nix tests.simple.x86_64-linux
we use noXlibs and qemu.ga. Now that output is tiny but to get it
a full qemu build is done, and some dependencies like gtk3 won't build
with noXlibs due to their dependencies being too stripped down.
Therefore let's reduce qemu features in noXlibs case.
The `sdlSupport = false;` part probably wasn't needed,
but I added it for consistency.
Discovered via https://github.com/NixOS/nixpkgs/pull/82743 which
improved option checking, causing an evaluation error that was
hard to understand without running the evaluation manually.
symlinkJoin can break (silently) when the passed paths contain symlinks
to directories. This should work now.
Down-side: when lib/tmpfiles.d doesn't exist for some passed package,
the error message is a little less explicit, because we never get
to the postBuild phase (and symlinkJoin doesn't provide a better way):
/nix/store/HASH-NAME/lib/tmpfiles.d: No such file or directory
Also, it seemed pointless to create symlinks for whole package trees
and using only a part of the result (usually very small part).
This patch ensures that latest Nextcloud works flawlessly again on our
`nginx`. The new config is mostly based on upstream recommendations
(again)[1]:
* Trying to access internals now results in a 404.
* All `.php`-routes get properly resolved now.
* Removed 404/403 handling from `nginx` as the app itself takes care of
this. Also, this breaks the `/ocs`-API.
* `.woff2?`-files expire later than other assets like images.
Closes#95293
[1] https://docs.nextcloud.com/server/latest/admin_manual/installation/nginx.html
Turns out lot of software (including Chromium) use bundled fontconfig
so we either need to wrap every one of those, or re-introduce the global unversioned config.
The latter is easier but weakens hermetic configs. But perhaps those are not really worth the effort.
These are now only installed by systemd if HAVE_SYSV_COMPAT is true,
which only is the case if you set sysvinit-path and sysvrcnd-path (which
we explicitly unset in the systemd derivation for quite some time)
From the systemd release notes:
nss-mymachines lost support for resolution of users and groups, and now
only does resolution of hostnames. This functionality is now provided by
nss-systemd. Thus, the 'mymachines' entry should be removed from the
'passwd:' and 'group:' lines in /etc/nsswitch.conf (and 'systemd' added
if it is not already there).
Since systemd 243, docs were already steering users towards using
`journal`:
eedaf7f322
systemd 246 will go one step further, it shows warnings for these units
during bootup, and will [automatically convert these occurences to
`journal`](f3dc6af20f):
> [ 6.955976] systemd[1]: /nix/store/hwyfgbwg804vmr92fxc1vkmqfq2k9s17-unit-display-manager.service/display-manager.service:27: Standard output type syslog is obsolete, automatically updating to journal. Please update│······················
your unit file, and consider removing the setting altogether.
So there's no point of keeping `syslog` here, and it's probably a better
idea to just not set it, due to:
> This setting defaults to the value set with DefaultStandardOutput= in
> systemd-system.conf(5), which defaults to journal.
Since systemd 246, these are only installed by systemd if
HAVE_SYSV_COMPAT is true, which only is the case if you set
sysvinit-path and sysvrcnd-path (which we explicitly unset in the
systemd derivation for quite some time)
This breaks the Nextcloud vhost declaration when adding e.g. another
vhost as the `services.nginx.virtualHosts` option has `{ nextcloud =
...; }` as *default* value which will be replaced by another
`virtualHosts`-declaration with a higher (e.g. the default) priority.
The following cases are now supported & covered by the module:
* `nginx` is enabled with `nextcloud` enabled and other vhosts can be
added / other options can be declared without having to care
about the declaration's priority.
* Settings in the `nextcloud`-vhost in `nginx` have to be altered using
`mkForce` as this is the only way how we officially support `nginx`
for `nextcloud` and customizations have to be done explicitly using
`mkForce`.
* `nginx` will be completely omitted if a user enables nextcloud
and disables nginx using `services.nginx.enable = false;`. (because
nginx will be enabled by this module using `mkDefault`).
This reverts commit 128dbb31cc.
Closes#95259
nginx -t not only verifies configuration, but also creates (and chowns)
files. When the `nginx-config-reload` service is used, this can cause
directories to be chowned to `root`, causing nginx to fail.
This moves the nginx -t command into a second ExecReload command, which
runs as nginx's user. While fixing above issue, this will also cause the
configuration to be verified when running `systemctl reload nginx`, not
only when restarting the dummy `nginx-config-reload` unit. The latter is
mostly a workaround for missing features in our activation script
anyways.
Prior to this change, the `config` option (which allows you define the
haskell configuration for xmonad in your configuration.nix instead of
needing something in the home directory) prevents desktop manager
resources from starting. This can be demonstrated by configuring the
following:
```
services.xserver = {
displayManager.defaultSession = "xfce+xmonad";
displayManager.lightdm.enable = true;
desktopManager.xterm.enable = false;
desktopManager.xfce.enable = true;
desktopManager.xfce.enableXfwm = false;
desktopManager.xfce.noDesktop = true;
windowManager.xmonad = {
enable = true;
enableContribAndExtras = true;
extraPackages = haskellPackages: [
haskellPackages.xmonad-contrib
haskellPackages.xmonad-extras
haskellPackages.xmonad
];
config = ''
import XMonad
import XMonad.Config.Xfce
main = xmonad xfceConfig
{ terminal = "terminator"
, modMask = mod4Mask }
'';
};
};
```
and after user log in, search for xfce processes `ps aux | grep xfce`.
You will not find xfce processes running until after the xmonad process is killed.
The bug prevents utilities included with the desktopManager,
(e.g. powerManagement, session logout, etc.)
from working as expected.
Use StateDirectory to create necessary directories and hardcode some
paths. Also drop file based audit logs, they can be found in the
journal. And add module option deprecation messages.
In fd9eb16b24, the option
"services.nextcloud.nginx.enable" has been removed since the module now
exclusively supports nginx only.
Unfortunately, with the option gone from the manual, the link in the
Nextcloud-specific documentation referencing the NixOS option also
became a dead link and thus the manual will no longer build.
I also removed a second reference to this option in the Nextcloud-
specific documentation, which while it doesn't lead to a build error in
the manual is nevertheless a good idea to remove as well to ensure we
don't present outdated information to readers of the manual.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @DavHau, @Ma27
The missing () caused parts of the escripts to be added to the
ExecStartPost line instead of inside the script.
This caused postgresql start to fail under certain conditions.
