Problem: Restarting (stopping) system.slice would not only stop X11 but
also most system units/services. We obviously don't want this happening
to users when they switch from 18.03 to 18.09 or nixos-unstable.
Reason: The following change in systemd:
d8e5a93382
The commit adds system.slice to the perpetual units, which means
removing the unit file and adding it to the source code. This is done so
that system.slice can't be stopped anymore but in our case it ironically
would cause this script to stop system.slice because the unit file was
removed (and an older systemd version is still running).
Related issue: https://github.com/NixOS/nixpkgs/issues/39791
In 0c7c1660f7 I have set allowSubstitutes
to false, which avoided the substitution of the certificates.
Unfortunately substitution may still happen later when the certificate
is merged with the CA bundle. So the merged CA bundle might be
substituted from a binary cache but the certificate itself is built
locally, which could result in a different certificate in the bundle.
So instead of adding just yet another workaround, I've now hardcoded all
the certificates and keys in a separate file. This also moves
letsencrypt.nix into its own directory so we don't mess up
nixos/tests/common too much.
This was long overdue and should finally make the dependency graph for
the ACME test more deterministic.
Signed-off-by: aszlig <aszlig@nix.build>
Since e95f17e272, Go packages no longer
contain the source tree, however Boulder seems to need that as it
generates a few files during build.
Ideally we would only pick the files that are needed and put it into a
separate output, but I currently don't have time for this so I'm marking
this with XXX to get back to it later.
Signed-off-by: aszlig <aszlig@nix.build>
When running e.g. `nixos-option boot.kernelPackages` I get an output
like this on the current unstable channel (18.09pre144959.be1461fc0ab):
```
$ nixos-option boot.kernelPackages
Value:
*exit 1*
```
This is fairly counter-intuitive as I have no clue what might went
wrong. `strace` delivers an output like this:
```
read(3, "error: Package \342\200\230cryptodev-linu"..., 128) = 128
read(3, "ux/cryptodev/default.nix:22 is m"..., 128) = 128
read(3, "lowBroken = true; }\nin configura"..., 128) = 128
read(3, "you can add\n { allowBroken = tr"..., 128) = 128
read(3, "n)\n", 128) = 3
read(3, "", 128) = 0
```
`nixos-option` evaluates the system config using `nix-instantiate` which
might break when the evaluation fails (e.g. due to broken or unfree
packages that are prohibited to evaluate by default). The script aborts
due to the shebang `@shell@ -e`.
In order to ensure that no unexpected
behavior occurs due to removing `-e` from the interpreter the easiest
way to work around this was to wrap `nix-instantiate` in `evalNix()`
with a `set +e`. The function checks the success of the evaluation with
`$?` in the end. Additionally `evalNix` shouldn't break, if one
evaluation (e.g. the values that contain a package set by default) to
return additional information like a description.
With the change `nixos-option boot.kernelPackages` delivers the
following output for me:
```
Value:
error: Package ‘cryptodev-linux-1.9-4.14.52’ in /nix/store/47z2s8cwppymmgzw6n7pbcashikyk5jk-nixos/nixos/pkgs/os-specific/linux/cryptodev/default.nix:22 is marked as broken, refusing to evaluate.
Default:
{ __unfix__ = <LAMBDA>; acpi_call = <CODE>; amdgpu-pro = <CODE>; ati_drivers_x11 = <CODE>; batman_adv = <CODE>; bbswitch = <CODE>; bcc = <CODE>; beegfs-module = <CODE>; blcr = <CODE>; broadcom_sta = <CODE>; callPackage = <CODE>; cpupower = <CODE>; cryptodev = <CODE>; dpdk = <CODE>; e1000e = <CODE>; ena = <CODE>; evdi = <CODE>; exfat-nofuse = <CODE>; extend = <CODE>; facetimehd = <CODE>; fusionio-vsl = <CODE>; hyperv-daemons = <CODE>; ixgbevf = <CODE>; jool = <CODE>; kernel = <CODE>; lttng-modules = <CODE>; mba6x_bl = <CODE>; mwprocapture = <CODE>; mxu11x0 = <CODE>; ndiswrapper = <CODE>; netatop = <CODE>; nvidiaPackages = <CODE>; nvidia_x11 = <CODE>; nvidia_x11_beta = <CODE>; nvidia_x11_legacy304 = <CODE>; nvidia_x11_legacy340 = <CODE>; nvidiabl = <CODE>; odp-dpdk = <CODE>; openafs = <CODE>; openafs_1_8 = <CODE>; perf = <CODE>; phc-intel = <CODE>; pktgen = <CODE>; ply = <CODE>; prl-tools = <CODE>; recurseForDerivations = true; rtl8192eu = <CODE>; rtl8723bs = <CODE>; rtl8812au = <CODE>; rtl8814au = <CODE>; rtlwifi_new = <CODE>; sch_cake = <CODE>; spl = <CODE>; splLegacyCrypto = <CODE>; splStable = <CODE>; splUnstable = <CODE>; stdenv = <CODE>; sysdig = <CODE>; systemtap = <CODE>; tbs = <CODE>; tmon = <CODE>; tp_smapi = <CODE>; usbip = <CODE>; v4l2loopback = <CODE>; v86d = <CODE>; vhba = <CODE>; virtualbox = <CODE>; virtualboxGuestAdditions = <CODE>; wireguard = <CODE>; x86_energy_perf_policy = <CODE>; zfs = <CODE>; zfsLegacyCrypto = <CODE>; zfsStable = <CODE>; zfsUnstable = <CODE>; }
Example:
{ _type = "literalExample"; text = "pkgs.linuxPackages_2_6_25"; }
Description:
"This option allows you to override the Linux kernel used by\nNixOS. Since things like external kernel module packages are\ntied to the kernel you're using, it also overrides those.\nThis option is a function that takes Nixpkgs as an argument\n(as a convenience), and returns an attribute set containing at\nthe very least an attribute <varname>kernel</varname>.\nAdditional attributes may be needed depending on your\nconfiguration. For instance, if you use the NVIDIA X driver,\nthen it also needs to contain an attribute\n<varname>nvidia_x11</varname>.\n"
Declared by:
"/nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/nixos/modules/system/boot/kernel.nix"
Defined by:
"/home/ma27/Projects/nixos-config/system/boot.nix"
```
* nixos/virtualbox: Adds more options to virtualbox-image.nix
Previously you could only set the size of the disk.
This change adds the ability to change the amount of memory
that the image gets, along with the name / derivation name /
file name for the VM.
* Incorporates some review feedback
Since IP address options were changed for 18.03, eval has failed with:
"The option `networking.interfaces.eth1.subnetMask' is used but not defined."
although this option is not used at all in nixos anymore.
The misleading error message seems to be generated from evaluating warnings
for `mkRemovedOptionModule ["subnetMask"]` which apparently broke here
when this test inherited network.interfaces from one VM config to another.
Cc: @aszlig
This allows non-privileged users to configure local DNS
entries by editing hosts files read by NetworkManager's dnsmasq
instance.
Cherry-picked from e6c3d5a507909c4e0c0a5013040684cce89c35ce and
5a566004a2b12c3d91bf0acdb704f1b40770c28f.
With a config like
{
networking.interfaces."lo".ip4 = [
{ address = "10.8.8.8"; prefixLength = 32; }
];
}
a nixos-rebuild switch would take a long time, and you'd see:
$ systemctl list-jobs
JOB UNIT TYPE STATE
734400 network-interfaces.target start waiting
734450 sys-subsystem-net-devices-lo.device start running
734449 network-link-lo.service start waiting
and:
systemd[1]: sys-subsystem-net-devices-lo.device: Job sys-subsystem-net-devices-lo.device/star>
systemd[1]: sys-subsystem-net-devices-lo.device: Job sys-subsystem-net-devices-lo.device/star>
systemd[1]: Timed out waiting for device sys-subsystem-net-devices-lo.device.
This removes the device dependency for `lo` and fixes this bug.
Closes#7227
The deep merge caused all the options to be unset when generating docs, unless quagga was enabled.
Using imports, instead, properly allows the documentation to be generated.
The `.service` file defining the `systemd` unit for `autorandr.service`
which is bundled with the package itself uses `--default default` in the
`ExecStart` section. This can be an issue when having multiple layouts
(e.g. `default` as workstation layout I mostly work on and `mobile` when
I go somewhere else).
When the service gets restarted and `--default` can't be applied,
however the current layout can't be detected (e.g. when working with an
unknown beamer) the service silently fails with a message like this:
```
Jun 22 18:44:46 hauptshuhle autorandr[3168]: /nix/store/h83b72ffm68nm8fyjnppljchp456a94r-xrandr-1.5.0/bin/xrandr: ca>
Jun 22 18:44:46 hauptshuhle autorandr[3168]: Failed to apply profile 'default' (line 718):
Jun 22 18:44:46 hauptshuhle autorandr[3168]: Command failed: /nix/store/h83b72ffm68nm8fyjnppljchp456a94r-xrandr-1.>
```
As discussed in the IRC (see https://botbot.me/freenode/nixos/2018-07-05/?msg=101791455&page=6)
it's a bad long-term solution in terms of maintenance to manually patch
the service file bundled with the derivation, instead the service shall
be configured declaratively. Additionally this makes possible overrides
from the user-space way easier.
The `udev` rule (in `$out/etc/udev/rules.d`) won't' be affected, it
simply runs `systemctl start autorandr.service` when e.g. a new display
is added, so now `udev` communicates with the NixOS systemd unit.
To update the plasma start menu `kbuildsyscoca5` needs to be executed.
There are several people complaining about missing applications in their
plasma start menu.
This patch adds a activationScript for plasma, that runs
`kbuildsyscoca5` for each user that has `isNormalUser` == `true`.
In fff5923686 all occurences of
users.extraUsers and users.extraGroups have been changed tree-wide to
users.users and users.group. In the meantime the hadoop modules were
introduced via #41381 (060a98e9f4).
Unfortunately those modules still use users.extraUsers, which has been
renamed a long time ago (14321ae243, about
three years from now), so let's actually rename it accordingly as well.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @matthewbauer, @aespinosa
The order of sudoers entries is significant. The man page for sudoers(5)
notes:
Where there are multiple matches, the last match is used (which is not
necessarily the most specific match).
This module adds a rule for group "wheel" matching all commands. If you
wanted to add a more specific rule allowing members of the "wheel" group
to run command `foo` without a password, you'd need to use mkAfter to
ensure your rule comes after the more general rule.
extraRules = lib.mkAfter [
{
groups = [ "wheel" ];
commands = [
{
command = "${pkgs.foo}/bin/foo";
options = [ "NOPASSWD" "SETENV" ];
}
]
}
];
Otherwise, when configuration options are merged, if the general rule
ends up after the specific rule, it will dictate the behavior even when
running the `foo` command.
If one of the certificates of the chain gets substituted from a binary
cache and the rest is generated locally it might turn out that we get
invalid certificates, which in turn cause tests using this module to
fail.
So let's set allowSubstitutes to false for all derivations that are
involved with certificate/key generation.
Signed-off-by: aszlig <aszlig@nix.build>
- Introduce new "server" output holding the server binaries
- Adapt tsmbac.patch to new build environment
- Adapt openafs nixos server module accordingly
- Update upstream CellServDB: 2017-03-14 -> 2018-05-14
- Introduce package attributes to refer to the openafs packages to use for
server, programs and kernel module
Rather than special-casing the dns options in networkmanager.nix, use
the module system to let unbound and systemd-resolved contribute to
the newtorkmanager config.
