This reverts commit 0a944b345e, reversing
changes made to 61733ed6cc.
I dislike these massive stdenv changes with unclear motivation,
especially when they involve gratuitous mass renames like NIX_CC ->
NIX_BINUTILS. The previous such rename (NIX_GCC -> NIX_CC) caused
months of pain, so let's not do that again.
This reverts commit eeabf85780.
This change suddenly makes tons of stdenv internals visible in
nativeBuildInputs of every derivation, which doesn't seem desirable.
E.g:
````
nix-repl> hello.nativeBuildInputs
[ «derivation /nix/store/bcfkyf6bhssxd2vzwgzmsbn7b5b9rpxc-patchelf-0.9.drv»
«derivation /nix/store/4wnshnz9wwanpfzcrdd76rri7pyqn9sk-paxctl-0.9.drv»
<< snip 10+ lines >>
«derivation /nix/store/d35pgh1lcg5nm0x28d899pxj30b8c9b2-gcc-wrapper-6.4.0.drv»
]
````
Additionally, instead of pulling them from `setup.sh`, route them via
Nix. This gets us one step closer to making stdenv be a plain attribute
set instead of a derivation.
The logic was made pure for the normal libSystem, but this change never
made it to the bootstrap tools. Deduplication the logic as the comment
suggests would have prevented this, but here's a stop-gap until we do
so.
The main changes are in libSystem, which lost the coretls component in 10.13
and some hardening changes that quietly crash any program that uses %n in
a non-constant format string, so we've needed to patch a lot of programs that
use gnulib.
In the extremely unlikely case that our store hash path ends in several
digits (as is the case right now), the Darwin ld will try to interpret
those digits as a version number and barf. To avoid that, we pass in the
SDK version explicitly to stop it from trying to figure it out from iffy
context.
Before all overrides were also pruned in the previous stage, now
only gcc and binutils are, because they alone care about about the
target platform. The rest of the overrides don't, so it's better to
preserve them in order to avoid spurious rebuilds.
The long term goal is a big replace:
{ inherit system platform; } => buildPlatform
crossSystem => hostPlatform
stdenv.cross => targetPlatform
And additionally making sure each is defined even when not cross compiling.
This commit refactors the bootstrapping code along that vision, but leaves
the old identifiers with their null semantics in place so packages can be
modernized incrementally.
This patch add a new argument to Nixpkgs default expression named "overlays".
By default, the value of the argument is either taken from the environment variable `NIXPKGS_OVERLAYS`,
or from the directory `~/.nixpkgs/overlays/`. If the environment variable does not name a valid directory
then this mechanism would fallback on the home directory. If the home directory does not exists it will
fallback on an empty list of overlays.
The overlays directory should contain the list of extra Nixpkgs stages which would be used to extend the
content of Nixpkgs, with additional set of packages. The overlays, i-e directory, files, symbolic links
are used in alphabetical order.
The simplest overlay which extends Nixpkgs with nothing looks like:
```nix
self: super: {
}
```
More refined overlays can use `super` as the basis for building new packages, and `self` as a way to query
the final result of the fix-point.
An example of overlay which extends Nixpkgs with a small set of packages can be found at:
https://github.com/nbp/nixpkgs-mozilla/blob/nixpkgs-overlay/moz-overlay.nix
To use this file, checkout the repository and add a symbolic link to
the `moz-overlay.nix` file in `~/.nixpkgs/overlays` directory.
Introduce new abstraction, `stdenv/booter.nix` for composing bootstraping
stages, and use it everywhere for consistency. See that file for more doc.
Stdenvs besides Linux and Darwin are completely refactored to utilize this.
Those two, due to their size and complexity, are minimally edited for
easier reviewing.
No hashes should be changed.
- The darwin test can now force the use of the freshly-booted darwin stdenv
- The linux test now passes enough dummy arguments
This may make debugging harder, if so, check out #20889
- Non-cross stdenvs are honest and assert that `crossSystem` is null
- `crossSystem` is a mandatory argument to top-level/stage.nix, just like
`system` and `platform`
- Broken default arguments on stdenvs for testing are gone.
- All stdenvs (but little-used stdenvNix) take the same arguments for easy
testing.
This makes the flow of data easier to understand. There's little downside
because the args in question are already inspected by the stdenvs.
cross-compiling in particular is simpler because we don't need to worry
about overriding the config closed over by `allPackages`.
This commit changes the dependencies of stdenv, and clean-up the stdenv
story by removing the `defaultStdenv` attribute as well as the `bootStdenv`
parameter.
Before, the final bootstrapping stage's stdenv was provided by
all-packages, which was iterating multiple times over the
top-level/default.nix expression, and non-final bootstrapping stages'
stdenvs were explicitly specified with the `bootStdenv` parameter.
Now, all stages' stdenvs are specified with the `stdenv` parameter.
For non-final bootstrapping stages, this is a small change---basically just
rename the parameter.
For the final stage, top-level/default.nix takes the chosen stdenv and
makes the final stage with it.
`allPackages` is used to make all bootstrapping stages, final and
non-final alike. It's basically the expression of `stage.nix` (along with a
few partially-applied default arguments)
Note, the make-bootstrap-tools scripts are temporarily broken
This reinstates the libSystem selective symbol export machinery we used
to have, but locks it to the symbols that were present in 10.11 and skips
the actual compiled code we put into that library in favor of the system
initialization code. That should make it more stable and less likely to
do weird stuff than the last time we did this.
The 3.8 upgrade was premature and appears to be breaking a load of stuff
that I can't look into right now. Will take it back to 3.8 and test more
thoroughly before pushing more broadly. I should learn to change fewer
variables at a time :)
It's a long build and generally painful to split into smaller commits,
so I apologize for lumping many changes into one commit but this is far
easier.
There are still several outdated parts of the darwin stdenv but these
changes should bring us closer to the goal.
Fixes#18461
Revert a revert of a merge that shouldn't have been in master but was intentionally in staging.
Next time I'll do this right after the revert instead of so far down the line...
This reverts commit 9adad8612b.
This will break part of the bootstrap tools tests because the new tools
need some changes in the stdenv, but if I change them all at once, the
stdenv breaks with the old bootstrap tools. So I'm doing this first, then
will make changes to the stdenv once this bundle is built and I can use
it.
I also added some functionality to let me test one set of bootstrap tools
on another nixpkgs tree, which makes testing a lot more pleasant.
This reverts commit debd401b0f.
We must not use a single-binary build for the bootstrap since the common
binary gains a dynamic linkage to gmp (due to 'factor' and 'expr'
handling arbitrary-precision arithmetic).
Our coreutils now uses single-binary-build mode where, by default,
simple shebang scripts are used for all the binaries. That doesn't work
e.g. with the Linux unpacker which only handles standard binaries and
symlinks. Let's use the symlinked mode instead for boostrapping.
This does NOT change any stdenv hashes.
I only tested the case most important to me:
$ nix-build pkgs/top-level/release.nix -A stdenvBootstrapTools.x86_64-linux.test
Commit 2040a9ac57 changed the order of
$PATH elements, causing initialpath to appear after buildInputs. Thus
gnugrep ended up depending on bin/sh from bootstrapTools, rather than
from pkgs.bash. The fix is to provide pkgs.bash via buildInputs rather
than initialPath.
http://hydra.nixos.org/build/33276697
The $lib output refers to the terminfo database in $out, which is about
10x larger than the ncurses shared library. Splitting these outputs
saves a small amount of space for any derivations that use the terminfo
database but not the ncurses library, but we do not have evidence that
any such exist.
The ld-wrapper.sh script calls `readlink` in some circumstances. We need
to ensure that this is the `readlink` from the `coreutils` package so
that flag support is as expected.
This is accomplished by explicitly setting PATH at the top of each shell
script.
Without doing this, the following happens with a trivial `main.c`:
```
nix-env -f "<nixpkgs>" -iA pkgs.clang
$ clang main.c -L /nix/../nix/store/2ankvagznq062x1gifpxwkk7fp3xwy63-xnu-2422.115.4/Library -o a.out
readlink: illegal option -- f
usage: readlink [-n] [file ...]
```
The key element is the `..` in the path supplied to the linker via a
`-L` flag. With this patch, the above invocation works correctly on
darwin, whose native `/usr/bin/readlink` does not support the `-f` flag.
The explicit path also ensures that the `grep` called by `cc-wrapper.sh`
is the one from Nix.
Fixes#6447
This un-hardcodes the bootstrap tools passed into the Darwin stdenv and
thus allows us to quickly iterate on improving the design of the full
bootstrap process. We can easily change the contents of the bootstrap
tools and evaluate an entire bootstrap all the way up to real packages.
92188d9d17 broke the case where the user
has Xcode but not the command-line tools. So this commit restores
using xcrun to get the path to the SDK (falling back to / for the
non-Xcode case).
http://hydra.nixos.org/build/19953295
