When rebuilding you have to manually run `systemctl --user
daemon-reload`. It gathers all authenticated users using
`loginctl list-user` and runs `daemon-reload` for each of them.
This is a first step towards a `nixos-rebuild` which is able to reload
user units from systemd. The entire task is fairly hard, however I
consider this patch usable as it allows to restart units without running
`daemon-reload` for each authenticated user.
This fixes an issue where setting both
`boot.loader.systemd-boot.editor` to `false` and
`boot.loader.systemd-boot.consoleMode` to any value would concatenate
the two configuration lines in the output, resulting in an invalid
`loader.conf`.
From reading the source I'm pretty sure it doesn't support multiple Yubikeys, hence
those options are useless.
Also, I'm pretty sure nobody actually uses this feature, because enabling it causes
extra utils' checks to fail (even before applying any patches of this branch).
As I don't have the hardware to test this, I'm too lazy to fix the utils, but
I did test that with extra utils checks commented out and Yubikey
enabled the resulting script still passes the syntax check.
Also reuse common cryptsetup invocation subexpressions.
- Passphrase reading is done via the shell now, not by cryptsetup.
This way the same passphrase can be reused between cryptsetup
invocations, which this module now tries to do by default (can be
disabled).
- Number of retries is now infinity, it makes no sense to make users
reboot when they fail to type in their passphrase.
This allows a developer to better identify in which snippet the
failure happened. Furthermore, users seeking help will have more
information available about the failure.
Problem: Restarting (stopping) system.slice would not only stop X11 but
also most system units/services. We obviously don't want this happening
to users when they switch from 18.03 to 18.09 or nixos-unstable.
Reason: The following change in systemd:
d8e5a93382
The commit adds system.slice to the perpetual units, which means
removing the unit file and adding it to the source code. This is done so
that system.slice can't be stopped anymore but in our case it ironically
would cause this script to stop system.slice because the unit file was
removed (and an older systemd version is still running).
Related issue: https://github.com/NixOS/nixpkgs/issues/39791
Rather than special-casing the dns options in networkmanager.nix, use
the module system to let unbound and systemd-resolved contribute to
the newtorkmanager config.
find-libs is currently choking when it finds the dynamic linker
as a DT_NEEDED dependency (from glibc) and bails out like this
(as glibc doesn't have a RPATH):
Couldn't satisfy dependency ld-linux-x86-64.so.2
Actually the caller of find-libs ignores the exit status, so the issue
almost always goes unnoticed and happens to work by chance. But
additionally what happens is that indirect .so dependencies are
left out from the dependency closure calculation, which breaks
latest cryptsetup as libssl.so isn't found anymore.
F2FS is used on Raspberry Pi-like devices to enhance SD card performance. Allowing F2FS resizing would help in automatic deploying of SD card images without a Linux box to resize the file system offline.
This has been reported by @qknight in his Stack Overflow question:
https://stackoverflow.com/q/50678639
The correct way to override a single value would be to use something
like this:
systemd.services.nagios.serviceConfig.Restart = lib.mkForce "no";
However, this doesn't work because the check is applied for the attrsOf
type and thus the attribute values might still contain the attribute set
created by mkOverride.
The unitOption type however did already account for this, but at this
stage it's already too late.
So now the actual value is unpacked while checking the values of the
attribute set, which should allow us to override values in
serviceConfig.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @edolstra, @qknight
When a package contains a directory in one of the systemd directories
(like flatpak does), it is symlinked into the *-units derivation.
Then later, the derivation will try to create the directory, which
will fail:
mkdir: cannot create directory '/nix/store/…-user-units/dbus.service.d': File exists
builder for '/nix/store/…-user-units.drv' failed with exit code 1
Closes: #33233
GRUB 2.0 supports png, jpeg and tga. This will use the image's suffix to
load the right module.
As jpeg module is named jpeg, jpg is renamed jpeg.
If the user uses wrong image suffix for an image, it wouldn't work anyway.
This will leave up to two additional left-over files in /boot/ if user switches
through all the supported file formats. The module already left the png
image if the user disabled the splash image.
This is apparent from the service file directory in plymouth:
├── multi-user.target.wants
│ ├── plymouth-quit.service -> ../plymouth-quit.service
│ └── plymouth-quit-wait.service -> ../plymouth-quit-wait.service
Leaving it unspecified caused gdm-wayland to crash on boot, see #39615.
The change made other display managers not quit plymouth properly however. By
removing "multi-user.target" from `plymouth-quit.after` this is resolved.
The isKexecable flag treated Linux without kexec as just a normal
variant, when it really should be treated as a special case incurring
complexity debt to support.
Resolved the following conflicts (by carefully applying patches from the both
branches since the fork point):
pkgs/development/libraries/epoxy/default.nix
pkgs/development/libraries/gtk+/3.x.nix
pkgs/development/python-modules/asgiref/default.nix
pkgs/development/python-modules/daphne/default.nix
pkgs/os-specific/linux/systemd/default.nix
This can be used to fix issues where udhcpc times out before
acquiring a lease. For example of these issues, see:
https://bugs.alpinelinux.org/issues/3105#note-8
Signed-off-by: Dino A. Dai Zovi <ddz@theta44.org>
At one point in my configuration I had:
boot.kernel.sysctl = {
# https://unix.stackexchange.com/questions/13019/description-of-kernel-printk-values
"kernel.printk" = "4 4 1 7";
};
which triggered:
error: The unique option `boot.kernel.sysctl.kernel.printk' is defined multiple times, in `/home/teto/dotfiles/nixpkgs/mptcp-unstable.nix' and `/home/teto/nixpkgs/nixos/modules/system/boot/kernel.nix'.
(use ‘--show-trace’ to show detailed location information)
Traceback (most recent call last):
File "/home/teto/nixops/scripts/nixops", line 984, in <module>
args.op()
File "/home/teto/nixops/scripts/nixops", line 406, in op_deploy
max_concurrent_activate=args.max_concurrent_activate)
File "/home/teto/nixops/nixops/deployment.py", line 1045, in deploy
self.run_with_notify('deploy', lambda: self._deploy(**kwargs))
File "/home/teto/nixops/nixops/deployment.py", line 1034, in run_with_notify
f()
File "/home/teto/nixops/nixops/deployment.py", line 1045, in <lambda>
self.run_with_notify('deploy', lambda: self._deploy(**kwargs))
File "/home/teto/nixops/nixops/deployment.py", line 985, in _deploy
self.configs_path = self.build_configs(dry_run=dry_run, repair=repair, include=include, exclude=exclude)
File "/home/teto/nixops/nixops/deployment.py", line 653, in build_configs
raise Exception("unable to build all machine configurations")
Exception: unable to build all machine configurations
This simple addition allows to override it.
Fixes#28443
Fixed few invocations to `systemctl` to have an absolute path. Additionally add
LOCALE_ARCHIVE so that perl stops spewing warning messages.
This option, if set to true, enables fallbacking to an interactive
passphrase prompt when the specified keyFile is not found.
The default is false, which is compatible with previous behavior and
doesn't prevent unattended boot.
Regression introduced by 801c920e95.
Since then, the btrfsSimple subtest of the installer VM test fails with:
Btrfs did not return a path for the subvolume at /
The reason for this is that the output for "btrfs subvol show" has
changed between version 4.8.2 and 4.13.1.
For example the output of "btrfs subvol show /" in version 4.8.2 was:
/ is toplevel subvolume
In version 4.13.1, the output now is the following and thus the regular
expressions used in nixos-generate-config.pl and install-grub.pl now
match (which results in the error mentioned above):
/
Name: <FS_TREE>
UUID: -
Parent UUID: -
Received UUID: -
Creation time: -
Subvolume ID: 5
Generation: 287270
Gen at creation: 0
Parent ID: 0
Top level ID: 0
Flags: -
Snapshot(s):
In order to fix this I've changed nixos-generate-config.pl and
install-grub.pl, because both use "btrfs subvol show" in a similar vein,
so the regex for parsing the output now doesn't match anymore whenever
the volume path is "/", which should result in the same behaviour as we
had with btrfs-progs version 4.8.2.
Tested against the btrfsSimple, btrfsSubvols and btrfsSubvolDefault
subtests of the installer VM test and they all succeed now.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
* the keyboard modules in all-hardware.nix are already defaults of
boot.initrd.availableKernelModules
* ide modules, hid_lenovo_tpkbd and scsi_wait_scan have been removed
because they're not available anymore
* i8042 was a duplicate (see few lines abowe)
the systemd.unit(5) discussion of wantedBy and requiredBy is in the
[Install] section, and thus focused on stateful 'systemctl enable'.
so, clarify that in NixOS, wantedBy & requiredBy are still what most
users want, and not to be confused with enabled.
Boot fails when a keyfile is configured for all encrypted filesystems
and no other luks devices are configured. This is because luks support is only
enabled in the initrd, when boot.initrd.luks.devices has entries. When a
fileystem has a keyfile configured though, it is setup by a custom
command, not by boot.initrd.luks.
This commit adds an internal config flag to enable luks support in the
initrd file, even if there are no luks devices configured.
Grub configs include the NixOS version and date they were built, now
systemd can have fun too:
version Generation 99 NixOS 17.03.1700.51a83266d1, Linux Kernel 4.9.43, Built on 2017-08-30
version Generation 100 NixOS 17.03.1700.51a83266d1, Linux Kernel 4.9.43, Built on 2017-08-30
version Generation 101 NixOS 17.03.1700.51a83266d1, Linux Kernel 4.9.43, Built on 2017-08-31
version Generation 102 NixOS 17.03.1700.51a83266d1, Linux Kernel 4.9.43, Built on 2017-09-01
version Generation 103 NixOS 17.03.1700.51a83266d1, Linux Kernel 4.9.43, Built on 2017-09-02
version Generation 104 NixOS 17.09beta41.1b8c7786ee, Linux Kernel 4.9.46, Built on 2017-09-02
version Generation 105 NixOS 17.09.git.1b8c778, Linux Kernel 4.9.46, Built on 2017-09-02
The message buffer of the kernel lists
> Please run 'e2fsck -f /dev/disk/by-label/nixos' first.
as the output of the command `resize2fs "$device"`.
This fixesNixOS/nixpkgs#26910.
old version of blkid used to output version information including libblkid version
when invoked with --help parameter
new version does not output libblkid version when invoked with --help parameter
fix is to invoke blkid with -V parameter to output version including libblkid in both cases
* systemd-boot-builder.py: add support for profiles
This will also list the generations of other profiles than `system` in
the boot menu. See the documentation of the `--profile-name` option of
nixos-rebuild for more information on profiles.
* Fix errors introduced by previous commit
Or else `services.udev.packages = [ bcache-tools ]` cannot be used.
To not break bcache in the initrd I'm modifying this in stage-1.nix:
- --replace /bin/sh ${extraUtils}/bin/sh
+ --replace ${bash}/bin/sh ${extraUtils}/bin/sh
Reasoning behind that change:
* If not modifying the /bin/sh pattern in any way, it will also match
${bash}/bin/sh, creating a broken path like
/nix/store/HASH-bash/nix/store/HASH-bash/bin/sh in the udev rule file.
* The addition of /bin/sh was done in 775f381a9e
("stage-1: add bcache support"). It seems somewhat plausible that
no new users have appeared since then and we can take this opportunity
to back out of this change without much fear of regressions.
If there _are_ regressions, they should be in the form of build time
errors, not runtime (boot), due to how the udev rule output is checked
for invalid path references. So low risk, IMHO.
* An alternative approach could be to copy the /bin/sh substitute rule
over to the non-initrd udev rules implementation in NixOS, but I think
this way is better:
- The rules file comes with a working path out of the box.
- We can use more precise pattern matching when modifying the udev
rules for the initrd.
The default font is unreadably small on some hidpi displays. This
makes it possible to specify a TrueType or OpenType font at any point
size, and it will automatically be converted to the format the Grub
uses.
Restructure the nixos-artwork to make it easy to selectively
incorporate other components from upstream without needing to download
the full package.
Until now only the Gnome_Dark wallpaper was included. Add other
wallpapers available in the package repository.
Since fat32 provides little recovery facilities after a crash,
it can leave the system in an unbootable state, when a crash/outage
happens shortly after an update. To decrease the likelihood of this
event sync the efi filesystem after each update.
Someone on IRC wanted to boot Fedora from another disk. While I'm not
too familiar with UEFI booting in conjunction with GRUB2 it took some
time to get it to work.
So in order to safe others from frustration I'm adding this as another
example to the extraEntries option.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This has surfaced since d990aa7163.
The "simpleUefiGummiboot" installer test fails since this commit,
because that commit introduced a small check to verify whether the store
was altered.
While installing NixOS for the first time, the store is usually in
/mnt/nix/store and without the read-only bind mount that's preventing
programs from altering the store.
So after nixos-install is done creating the system closure and setting
it as the active system profile, the bootloader is written from the
closure inside the chroot. The systemd-boot-builder is invoked during
this step, which adds .pyc files for various Python modules of the
Python 3 store path, which in turn invalidates the hash of the Python 3
store path itself.
At the time the system is booted up again, the nix-store is verified and
fails with something like this:
path /nix/store/zvm545rqc4d97caqq9h7344bnd06jhzb-python3-3.5.3 was
modified! expected hash
b2c975f4b8d197443fbb09690fb3f6545e165dd44c9309d7d6df2fce0579ebeb, got
bccca19f39c9d26d857ccf1fb72818b2b817967e6d497a25a1283e36ed0acf01
Running the interpreter with the -B argument prevents Python from
writing those byte code files:
https://docs.python.org/3/using/cmdline.html#cmdoption-B
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This reverts commit c2b56626f1.
It broke creating the manual. I suspect the descriptions are
auto-wrapped by <para> and </para>.
We've been through this already in 3af715af90.
/cc #24978, @zraexy, @Mic92.
