nixpkgs/pkgs/os-specific/linux/kernel/patches.nix

144 lines
3.9 KiB
Nix
Raw Normal View History

{ stdenv, fetchurl, pkgs }:
let
makeTuxonicePatch = { version, kernelVersion, sha256,
url ? "http://tuxonice.nigelcunningham.com.au/downloads/all/tuxonice-for-linux-${kernelVersion}-${version}.patch.bz2" }:
{ name = "tuxonice-${kernelVersion}";
patch = stdenv.mkDerivation {
name = "tuxonice-${version}-for-${kernelVersion}.patch";
src = fetchurl {
inherit url sha256;
};
phases = [ "installPhase" ];
installPhase = ''
source $stdenv/setup
bunzip2 -c $src > $out
'';
};
};
grsecPatch = { grversion ? "3.1", kernel, patches, kversion, revision, branch, sha256 }:
assert kversion == kernel.version;
nixos: add grsecurity module (#1875) This module implements a significant refactoring in grsecurity configuration for NixOS, making it far more usable by default and much easier to configure. - New security.grsecurity NixOS attributes. - All grsec kernels supported - Allows default 'auto' grsec configuration, or custom config - Supports custom kernel options through kernelExtraConfig - Defaults to high-security - user must choose kernel, server/desktop mode, and any virtualisation software. That's all. - kptr_restrict is fixed under grsecurity (it's unwriteable) - grsecurity patch creation is now significantly abstracted - only need revision, version, and SHA1 - kernel version requirements are asserted for sanity - built kernels can have the uname specify the exact grsec version for development or bug reports. Off by default (requires `security.grsecurity.config.verboseVersion = true;`) - grsecurity sysctl support - By default, disabled. - For people who enable it, NixOS deploys a 'grsec-lock' systemd service which runs at startup. You are expected to configure sysctl through NixOS like you regularly would, which will occur before the service is started. As a result, changing sysctl settings requires a reboot. - New default group: 'grsecurity' - Root is a member by default - GRKERNSEC_PROC_GID is implicitly set to the 'grsecurity' GID, making it possible to easily add users to this group for /proc access - AppArmor is now automatically enabled where it wasn't before, despite implying features.apparmor = true The most trivial example of enabling grsecurity in your kernel is by specifying: security.grsecurity.enable = true; security.grsecurity.testing = true; # testing 3.13 kernel security.grsecurity.config.system = "desktop"; # or "server" This specifies absolutely no virtualisation support. In general, you probably at least want KVM host support, which is a little more work. So: security.grsecurity.enable = true; security.grsecurity.stable = true; # enable stable 3.2 kernel security.grsecurity.config = { system = "server"; priority = "security"; virtualisationConfig = "host"; virtualisationSoftware = "kvm"; hardwareVirtualisation = true; } This module has primarily been tested on Hetzner EX40 & VQ7 servers using NixOps. Signed-off-by: Austin Seipp <aseipp@pobox.com>
2014-04-06 20:18:12 +01:00
{ name = "grsecurity-${grversion}-${kversion}";
inherit grversion kernel patches kversion revision;
nixos: add grsecurity module (#1875) This module implements a significant refactoring in grsecurity configuration for NixOS, making it far more usable by default and much easier to configure. - New security.grsecurity NixOS attributes. - All grsec kernels supported - Allows default 'auto' grsec configuration, or custom config - Supports custom kernel options through kernelExtraConfig - Defaults to high-security - user must choose kernel, server/desktop mode, and any virtualisation software. That's all. - kptr_restrict is fixed under grsecurity (it's unwriteable) - grsecurity patch creation is now significantly abstracted - only need revision, version, and SHA1 - kernel version requirements are asserted for sanity - built kernels can have the uname specify the exact grsec version for development or bug reports. Off by default (requires `security.grsecurity.config.verboseVersion = true;`) - grsecurity sysctl support - By default, disabled. - For people who enable it, NixOS deploys a 'grsec-lock' systemd service which runs at startup. You are expected to configure sysctl through NixOS like you regularly would, which will occur before the service is started. As a result, changing sysctl settings requires a reboot. - New default group: 'grsecurity' - Root is a member by default - GRKERNSEC_PROC_GID is implicitly set to the 'grsecurity' GID, making it possible to easily add users to this group for /proc access - AppArmor is now automatically enabled where it wasn't before, despite implying features.apparmor = true The most trivial example of enabling grsecurity in your kernel is by specifying: security.grsecurity.enable = true; security.grsecurity.testing = true; # testing 3.13 kernel security.grsecurity.config.system = "desktop"; # or "server" This specifies absolutely no virtualisation support. In general, you probably at least want KVM host support, which is a little more work. So: security.grsecurity.enable = true; security.grsecurity.stable = true; # enable stable 3.2 kernel security.grsecurity.config = { system = "server"; priority = "security"; virtualisationConfig = "host"; virtualisationSoftware = "kvm"; hardwareVirtualisation = true; } This module has primarily been tested on Hetzner EX40 & VQ7 servers using NixOps. Signed-off-by: Austin Seipp <aseipp@pobox.com>
2014-04-06 20:18:12 +01:00
patch = fetchurl {
2016-02-27 18:33:35 +00:00
url = if branch == "stable"
then "https://github.com/kdave/grsecurity-patches/blob/master/grsecurity_patches/grsecurity-${grversion}-${kversion}-${revision}.patch?raw=true"
else "https://github.com/slashbeast/grsecurity-scrape/blob/master/${branch}/grsecurity-${grversion}-${kversion}-${revision}.patch?raw=true";
nixos: add grsecurity module (#1875) This module implements a significant refactoring in grsecurity configuration for NixOS, making it far more usable by default and much easier to configure. - New security.grsecurity NixOS attributes. - All grsec kernels supported - Allows default 'auto' grsec configuration, or custom config - Supports custom kernel options through kernelExtraConfig - Defaults to high-security - user must choose kernel, server/desktop mode, and any virtualisation software. That's all. - kptr_restrict is fixed under grsecurity (it's unwriteable) - grsecurity patch creation is now significantly abstracted - only need revision, version, and SHA1 - kernel version requirements are asserted for sanity - built kernels can have the uname specify the exact grsec version for development or bug reports. Off by default (requires `security.grsecurity.config.verboseVersion = true;`) - grsecurity sysctl support - By default, disabled. - For people who enable it, NixOS deploys a 'grsec-lock' systemd service which runs at startup. You are expected to configure sysctl through NixOS like you regularly would, which will occur before the service is started. As a result, changing sysctl settings requires a reboot. - New default group: 'grsecurity' - Root is a member by default - GRKERNSEC_PROC_GID is implicitly set to the 'grsecurity' GID, making it possible to easily add users to this group for /proc access - AppArmor is now automatically enabled where it wasn't before, despite implying features.apparmor = true The most trivial example of enabling grsecurity in your kernel is by specifying: security.grsecurity.enable = true; security.grsecurity.testing = true; # testing 3.13 kernel security.grsecurity.config.system = "desktop"; # or "server" This specifies absolutely no virtualisation support. In general, you probably at least want KVM host support, which is a little more work. So: security.grsecurity.enable = true; security.grsecurity.stable = true; # enable stable 3.2 kernel security.grsecurity.config = { system = "server"; priority = "security"; virtualisationConfig = "host"; virtualisationSoftware = "kvm"; hardwareVirtualisation = true; } This module has primarily been tested on Hetzner EX40 & VQ7 servers using NixOps. Signed-off-by: Austin Seipp <aseipp@pobox.com>
2014-04-06 20:18:12 +01:00
inherit sha256;
};
features.grsecurity = true;
2013-05-11 06:44:30 +01:00
};
nixos: add grsecurity module (#1875) This module implements a significant refactoring in grsecurity configuration for NixOS, making it far more usable by default and much easier to configure. - New security.grsecurity NixOS attributes. - All grsec kernels supported - Allows default 'auto' grsec configuration, or custom config - Supports custom kernel options through kernelExtraConfig - Defaults to high-security - user must choose kernel, server/desktop mode, and any virtualisation software. That's all. - kptr_restrict is fixed under grsecurity (it's unwriteable) - grsecurity patch creation is now significantly abstracted - only need revision, version, and SHA1 - kernel version requirements are asserted for sanity - built kernels can have the uname specify the exact grsec version for development or bug reports. Off by default (requires `security.grsecurity.config.verboseVersion = true;`) - grsecurity sysctl support - By default, disabled. - For people who enable it, NixOS deploys a 'grsec-lock' systemd service which runs at startup. You are expected to configure sysctl through NixOS like you regularly would, which will occur before the service is started. As a result, changing sysctl settings requires a reboot. - New default group: 'grsecurity' - Root is a member by default - GRKERNSEC_PROC_GID is implicitly set to the 'grsecurity' GID, making it possible to easily add users to this group for /proc access - AppArmor is now automatically enabled where it wasn't before, despite implying features.apparmor = true The most trivial example of enabling grsecurity in your kernel is by specifying: security.grsecurity.enable = true; security.grsecurity.testing = true; # testing 3.13 kernel security.grsecurity.config.system = "desktop"; # or "server" This specifies absolutely no virtualisation support. In general, you probably at least want KVM host support, which is a little more work. So: security.grsecurity.enable = true; security.grsecurity.stable = true; # enable stable 3.2 kernel security.grsecurity.config = { system = "server"; priority = "security"; virtualisationConfig = "host"; virtualisationSoftware = "kvm"; hardwareVirtualisation = true; } This module has primarily been tested on Hetzner EX40 & VQ7 servers using NixOps. Signed-off-by: Austin Seipp <aseipp@pobox.com>
2014-04-06 20:18:12 +01:00
in
rec {
2015-01-13 23:49:14 +00:00
bridge_stp_helper =
{ name = "bridge-stp-helper";
patch = ./bridge-stp-helper.patch;
};
no_xsave =
{ name = "no-xsave";
patch = ./no-xsave.patch;
features.noXsave = true;
};
mips_fpureg_emu =
{ name = "mips-fpureg-emulation";
patch = ./mips-fpureg-emulation.patch;
};
mips_fpu_sigill =
{ name = "mips-fpu-sigill";
patch = ./mips-fpu-sigill.patch;
};
mips_ext3_n32 =
{ name = "mips-ext3-n32";
patch = ./mips-ext3-n32.patch;
};
ubuntu_fan =
{ name = "ubuntu-fan";
patch = ./ubuntu-fan-3.patch;
};
ubuntu_fan_4 =
{ name = "ubuntu-fan";
patch = ./ubuntu-fan-4.patch;
};
ubuntu_unprivileged_overlayfs =
{ name = "ubuntu-unprivileged-overlayfs";
patch = ./ubuntu-unprivileged-overlayfs.patch;
};
tuxonice_3_10 = makeTuxonicePatch {
version = "2013-11-07";
kernelVersion = "3.10.18";
sha256 = "00b1rqgd4yr206dxp4mcymr56ymbjcjfa4m82pxw73khj032qw3j";
};
nixos: add grsecurity module (#1875) This module implements a significant refactoring in grsecurity configuration for NixOS, making it far more usable by default and much easier to configure. - New security.grsecurity NixOS attributes. - All grsec kernels supported - Allows default 'auto' grsec configuration, or custom config - Supports custom kernel options through kernelExtraConfig - Defaults to high-security - user must choose kernel, server/desktop mode, and any virtualisation software. That's all. - kptr_restrict is fixed under grsecurity (it's unwriteable) - grsecurity patch creation is now significantly abstracted - only need revision, version, and SHA1 - kernel version requirements are asserted for sanity - built kernels can have the uname specify the exact grsec version for development or bug reports. Off by default (requires `security.grsecurity.config.verboseVersion = true;`) - grsecurity sysctl support - By default, disabled. - For people who enable it, NixOS deploys a 'grsec-lock' systemd service which runs at startup. You are expected to configure sysctl through NixOS like you regularly would, which will occur before the service is started. As a result, changing sysctl settings requires a reboot. - New default group: 'grsecurity' - Root is a member by default - GRKERNSEC_PROC_GID is implicitly set to the 'grsecurity' GID, making it possible to easily add users to this group for /proc access - AppArmor is now automatically enabled where it wasn't before, despite implying features.apparmor = true The most trivial example of enabling grsecurity in your kernel is by specifying: security.grsecurity.enable = true; security.grsecurity.testing = true; # testing 3.13 kernel security.grsecurity.config.system = "desktop"; # or "server" This specifies absolutely no virtualisation support. In general, you probably at least want KVM host support, which is a little more work. So: security.grsecurity.enable = true; security.grsecurity.stable = true; # enable stable 3.2 kernel security.grsecurity.config = { system = "server"; priority = "security"; virtualisationConfig = "host"; virtualisationSoftware = "kvm"; hardwareVirtualisation = true; } This module has primarily been tested on Hetzner EX40 & VQ7 servers using NixOps. Signed-off-by: Austin Seipp <aseipp@pobox.com>
2014-04-06 20:18:12 +01:00
grsecurity_stable = grsecPatch
2016-02-27 18:33:35 +00:00
{ kernel = pkgs.linux_grsecurity_3_14;
patches = [ grsecurity_fix_path_3_14 ];
kversion = "3.14.51";
2015-08-19 05:06:45 +01:00
revision = "201508181951";
nixos: add grsecurity module (#1875) This module implements a significant refactoring in grsecurity configuration for NixOS, making it far more usable by default and much easier to configure. - New security.grsecurity NixOS attributes. - All grsec kernels supported - Allows default 'auto' grsec configuration, or custom config - Supports custom kernel options through kernelExtraConfig - Defaults to high-security - user must choose kernel, server/desktop mode, and any virtualisation software. That's all. - kptr_restrict is fixed under grsecurity (it's unwriteable) - grsecurity patch creation is now significantly abstracted - only need revision, version, and SHA1 - kernel version requirements are asserted for sanity - built kernels can have the uname specify the exact grsec version for development or bug reports. Off by default (requires `security.grsecurity.config.verboseVersion = true;`) - grsecurity sysctl support - By default, disabled. - For people who enable it, NixOS deploys a 'grsec-lock' systemd service which runs at startup. You are expected to configure sysctl through NixOS like you regularly would, which will occur before the service is started. As a result, changing sysctl settings requires a reboot. - New default group: 'grsecurity' - Root is a member by default - GRKERNSEC_PROC_GID is implicitly set to the 'grsecurity' GID, making it possible to easily add users to this group for /proc access - AppArmor is now automatically enabled where it wasn't before, despite implying features.apparmor = true The most trivial example of enabling grsecurity in your kernel is by specifying: security.grsecurity.enable = true; security.grsecurity.testing = true; # testing 3.13 kernel security.grsecurity.config.system = "desktop"; # or "server" This specifies absolutely no virtualisation support. In general, you probably at least want KVM host support, which is a little more work. So: security.grsecurity.enable = true; security.grsecurity.stable = true; # enable stable 3.2 kernel security.grsecurity.config = { system = "server"; priority = "security"; virtualisationConfig = "host"; virtualisationSoftware = "kvm"; hardwareVirtualisation = true; } This module has primarily been tested on Hetzner EX40 & VQ7 servers using NixOps. Signed-off-by: Austin Seipp <aseipp@pobox.com>
2014-04-06 20:18:12 +01:00
branch = "stable";
2015-08-19 05:06:45 +01:00
sha256 = "1sp1gwa7ahzflq7ayb51bg52abrn5zx1hb3pff3axpjqq7vfai6f";
};
grsecurity_testing = grsecPatch
2016-02-27 18:33:35 +00:00
{ kernel = pkgs.linux_grsecurity_4_4;
patches = [ grsecurity_fix_path_4_4 ];
kversion = "4.4.2";
2016-02-27 15:13:08 +00:00
revision = "201602182048";
nixos: add grsecurity module (#1875) This module implements a significant refactoring in grsecurity configuration for NixOS, making it far more usable by default and much easier to configure. - New security.grsecurity NixOS attributes. - All grsec kernels supported - Allows default 'auto' grsec configuration, or custom config - Supports custom kernel options through kernelExtraConfig - Defaults to high-security - user must choose kernel, server/desktop mode, and any virtualisation software. That's all. - kptr_restrict is fixed under grsecurity (it's unwriteable) - grsecurity patch creation is now significantly abstracted - only need revision, version, and SHA1 - kernel version requirements are asserted for sanity - built kernels can have the uname specify the exact grsec version for development or bug reports. Off by default (requires `security.grsecurity.config.verboseVersion = true;`) - grsecurity sysctl support - By default, disabled. - For people who enable it, NixOS deploys a 'grsec-lock' systemd service which runs at startup. You are expected to configure sysctl through NixOS like you regularly would, which will occur before the service is started. As a result, changing sysctl settings requires a reboot. - New default group: 'grsecurity' - Root is a member by default - GRKERNSEC_PROC_GID is implicitly set to the 'grsecurity' GID, making it possible to easily add users to this group for /proc access - AppArmor is now automatically enabled where it wasn't before, despite implying features.apparmor = true The most trivial example of enabling grsecurity in your kernel is by specifying: security.grsecurity.enable = true; security.grsecurity.testing = true; # testing 3.13 kernel security.grsecurity.config.system = "desktop"; # or "server" This specifies absolutely no virtualisation support. In general, you probably at least want KVM host support, which is a little more work. So: security.grsecurity.enable = true; security.grsecurity.stable = true; # enable stable 3.2 kernel security.grsecurity.config = { system = "server"; priority = "security"; virtualisationConfig = "host"; virtualisationSoftware = "kvm"; hardwareVirtualisation = true; } This module has primarily been tested on Hetzner EX40 & VQ7 servers using NixOps. Signed-off-by: Austin Seipp <aseipp@pobox.com>
2014-04-06 20:18:12 +01:00
branch = "test";
2016-02-27 15:13:08 +00:00
sha256 = "0dm0nzzja6ynzdz2k5h0ckys7flw307i3w0k1lwjxfj80civ73wr";
};
grsecurity_fix_path_3_14 =
{ name = "grsecurity-fix-path-3.14";
patch = ./grsecurity-path-3.14.patch;
};
grsecurity_fix_path_4_4 =
{ name = "grsecurity-fix-path-4.4";
patch = ./grsecurity-path-4.4.patch;
};
crc_regression =
{ name = "crc-backport-regression";
patch = ./crc-regression.patch;
};
genksyms_fix_segfault =
{ name = "genksyms-fix-segfault";
patch = ./genksyms-fix-segfault.patch;
};
chromiumos_Kconfig_fix_entries_3_14 =
{ name = "Kconfig_fix_entries_3_14";
patch = ./chromiumos-patches/fix-double-Kconfig-entry-3.14.patch;
};
chromiumos_Kconfig_fix_entries_3_18 =
{ name = "Kconfig_fix_entries_3_18";
patch = ./chromiumos-patches/fix-double-Kconfig-entry-3.18.patch;
};
chromiumos_no_link_restrictions =
{ name = "chromium-no-link-restrictions";
patch = ./chromiumos-patches/no-link-restrictions.patch;
};
chromiumos_mfd_fix_dependency =
{ name = "mfd_fix_dependency";
patch = ./chromiumos-patches/mfd-fix-dependency.patch;
};
}