nixpkgs/pkgs/stdenv/generic/make-derivation.nix

343 lines
16 KiB
Nix
Raw Normal View History

{ lib, config, stdenv }:
rec {
# `mkDerivation` wraps the builtin `derivation` function to
# produce derivations that use this stdenv and its shell.
#
# See also:
#
# * https://nixos.org/nixpkgs/manual/#sec-using-stdenv
# Details on how to use this mkDerivation function
#
# * https://nixos.org/nix/manual/#ssec-derivation
# Explanation about derivations in general
mkDerivation =
{ name ? ""
stdenv: Fix handling of dependencies and hooks 4 far-reaching changes: Smaller PATH, New vars, different propagation logic, and different hook logic Smaller PATH ------------ `buildInputs` no longer go on the PATH at build time, as they cannot be run when cross compiling and we don't want to special case. Simply make a `nativeBuildInput` too if one needs them on the PATH. Fixes #21191. Many new depedendency variables ------------------------------- See the stdenv chapter of the nixpkgs manual. I pulled out the existing documentation of dependency specification into a new section, and added language for these two (and their propagated equivalents) along side the others'. More complex propagation logic ------------------------------ Before a propagated*XXX*Input always acted as if it was specified directly as a *XXX*Input downstream. That's simple enough, but violates the intended roles of each sort of dep, which has functional and not just stylistic consequences. The new algorithm is detailed in the manual, and ensures everything ends up in the right place. I tried to give both an informal and formal description, but I suspect in practice it will not make much sense until one tries cross compiling, after which it will immediately make sense as the only sane option. Simplified hook logic --------------------- Rather than `envHook` and `crossEnvHook`, whose behavior differs depending on whether we are cross compiling or not, there is now one hook per sort (or rather non-propagated and propagated pair of sorts) of dependency. These new hooks have the same meaning regardless of cross compilation. See the setup hook section of stdenv chapter of the Nixpkgs manual for more details.
2017-09-11 17:20:20 +01:00
# These types of dependencies are all exhaustively documented in
# the "Specifying Dependencies" section of the "Standard
# Environment" chapter of the Nixpkgs manual.
stdenv: Fix handling of dependencies and hooks 4 far-reaching changes: Smaller PATH, New vars, different propagation logic, and different hook logic Smaller PATH ------------ `buildInputs` no longer go on the PATH at build time, as they cannot be run when cross compiling and we don't want to special case. Simply make a `nativeBuildInput` too if one needs them on the PATH. Fixes #21191. Many new depedendency variables ------------------------------- See the stdenv chapter of the nixpkgs manual. I pulled out the existing documentation of dependency specification into a new section, and added language for these two (and their propagated equivalents) along side the others'. More complex propagation logic ------------------------------ Before a propagated*XXX*Input always acted as if it was specified directly as a *XXX*Input downstream. That's simple enough, but violates the intended roles of each sort of dep, which has functional and not just stylistic consequences. The new algorithm is detailed in the manual, and ensures everything ends up in the right place. I tried to give both an informal and formal description, but I suspect in practice it will not make much sense until one tries cross compiling, after which it will immediately make sense as the only sane option. Simplified hook logic --------------------- Rather than `envHook` and `crossEnvHook`, whose behavior differs depending on whether we are cross compiling or not, there is now one hook per sort (or rather non-propagated and propagated pair of sorts) of dependency. These new hooks have the same meaning regardless of cross compilation. See the setup hook section of stdenv chapter of the Nixpkgs manual for more details.
2017-09-11 17:20:20 +01:00
# TODO(@Ericson2314): Stop using legacy dep attribute names
# host offset -> target offset
, depsBuildBuild ? [] # -1 -> -1
, depsBuildBuildPropagated ? [] # -1 -> -1
, nativeBuildInputs ? [] # -1 -> 0 N.B. Legacy name
, propagatedNativeBuildInputs ? [] # -1 -> 0 N.B. Legacy name
, depsBuildTarget ? [] # -1 -> 1
, depsBuildTargetPropagated ? [] # -1 -> 1
, depsHostHost ? [] # 0 -> 0
, depsHostHostPropagated ? [] # 0 -> 0
, buildInputs ? [] # 0 -> 1 N.B. Legacy name
, propagatedBuildInputs ? [] # 0 -> 1 N.B. Legacy name
, depsTargetTarget ? [] # 1 -> 1
, depsTargetTargetPropagated ? [] # 1 -> 1
, checkInputs ? []
, installCheckInputs ? []
# Configure Phase
, configureFlags ? []
, cmakeFlags ? []
, # Target is not included by default because most programs don't care.
# Including it then would cause needless mass rebuilds.
#
# TODO(@Ericson2314): Make [ "build" "host" ] always the default.
configurePlatforms ? lib.optionals
(stdenv.hostPlatform != stdenv.buildPlatform)
[ "build" "host" ]
# TODO(@Ericson2314): Make unconditional / resolve #33599
# Check phase
, doCheck ? config.doCheckByDefault or false
# TODO(@Ericson2314): Make unconditional / resolve #33599
# InstallCheck phase
, doInstallCheck ? config.doCheckByDefault or false
, # TODO(@Ericson2314): Make always true and remove
strictDeps ? stdenv.hostPlatform != stdenv.buildPlatform
, meta ? {}
, passthru ? {}
, pos ? # position used in error messages and for meta.position
(if attrs.meta.description or null != null
then builtins.unsafeGetAttrPos "description" attrs.meta
else if attrs.version or null != null
then builtins.unsafeGetAttrPos "version" attrs
else builtins.unsafeGetAttrPos "name" attrs)
, separateDebugInfo ? false
, outputs ? [ "out" ]
, __impureHostDeps ? []
, __propagatedImpureHostDeps ? []
, sandboxProfile ? ""
, propagatedSandboxProfile ? ""
, hardeningEnable ? []
, hardeningDisable ? []
, ... } @ attrs:
let
# Check that the name is consistent with pname and version:
selfConsistent = (with attrs; attrs ? "name" ->
(lib.assertMsg (attrs ? "version" -> lib.strings.hasInfix version name)
"version ${version} does not appear in name ${name}" &&
lib.assertMsg (attrs ? "pname" -> lib.strings.hasInfix pname name)
"pname ${pname} does not appear in name ${name}"));
computedName = if name != "" then name else "${attrs.pname}-${attrs.version}";
# TODO(@oxij, @Ericson2314): This is here to keep the old semantics, remove when
# no package has `doCheck = true`.
doCheck' = doCheck && stdenv.hostPlatform == stdenv.buildPlatform;
doInstallCheck' = doInstallCheck && stdenv.hostPlatform == stdenv.buildPlatform;
outputs' = outputs ++ lib.optional separateDebugInfo "debug";
2018-08-05 20:24:46 +01:00
fixedOutputDrv = attrs ? outputHash;
noNonNativeDeps = builtins.length (depsBuildTarget ++ depsBuildTargetPropagated
++ depsHostHost ++ depsHostHostPropagated
++ buildInputs ++ propagatedBuildInputs
++ depsTargetTarget ++ depsTargetTargetPropagated) == 0;
runtimeSensativeIfFixedOutput = fixedOutputDrv -> !noNonNativeDeps;
supportedHardeningFlags = [ "fortify" "stackprotector" "pie" "pic" "strictoverflow" "format" "relro" "bindnow" ];
defaultHardeningFlags = if stdenv.targetPlatform.isMusl
then supportedHardeningFlags
else lib.remove "pie" supportedHardeningFlags;
enabledHardeningOptions =
if builtins.elem "all" hardeningDisable
then []
else lib.subtractLists hardeningDisable (defaultHardeningFlags ++ hardeningEnable);
# hardeningDisable additionally supports "all".
erroneousHardeningFlags = lib.subtractLists supportedHardeningFlags (hardeningEnable ++ lib.remove "all" hardeningDisable);
in if builtins.length erroneousHardeningFlags != 0
then abort ("mkDerivation was called with unsupported hardening flags: " + lib.generators.toPretty {} {
inherit erroneousHardeningFlags hardeningDisable hardeningEnable supportedHardeningFlags;
})
else let
doCheck = doCheck';
doInstallCheck = doInstallCheck';
2018-08-05 20:24:46 +01:00
outputs = outputs';
references = nativeBuildInputs ++ buildInputs
++ propagatedNativeBuildInputs ++ propagatedBuildInputs;
stdenv: Fix handling of dependencies and hooks 4 far-reaching changes: Smaller PATH, New vars, different propagation logic, and different hook logic Smaller PATH ------------ `buildInputs` no longer go on the PATH at build time, as they cannot be run when cross compiling and we don't want to special case. Simply make a `nativeBuildInput` too if one needs them on the PATH. Fixes #21191. Many new depedendency variables ------------------------------- See the stdenv chapter of the nixpkgs manual. I pulled out the existing documentation of dependency specification into a new section, and added language for these two (and their propagated equivalents) along side the others'. More complex propagation logic ------------------------------ Before a propagated*XXX*Input always acted as if it was specified directly as a *XXX*Input downstream. That's simple enough, but violates the intended roles of each sort of dep, which has functional and not just stylistic consequences. The new algorithm is detailed in the manual, and ensures everything ends up in the right place. I tried to give both an informal and formal description, but I suspect in practice it will not make much sense until one tries cross compiling, after which it will immediately make sense as the only sane option. Simplified hook logic --------------------- Rather than `envHook` and `crossEnvHook`, whose behavior differs depending on whether we are cross compiling or not, there is now one hook per sort (or rather non-propagated and propagated pair of sorts) of dependency. These new hooks have the same meaning regardless of cross compilation. See the setup hook section of stdenv chapter of the Nixpkgs manual for more details.
2017-09-11 17:20:20 +01:00
dependencies = map (map lib.chooseDevOutputs) [
[
(map (drv: drv.__spliced.buildBuild or drv) depsBuildBuild)
(map (drv: drv.nativeDrv or drv) nativeBuildInputs
++ lib.optional separateDebugInfo ../../build-support/setup-hooks/separate-debug-info.sh
++ lib.optional stdenv.hostPlatform.isWindows ../../build-support/setup-hooks/win-dll-link.sh)
(map (drv: drv.__spliced.buildTarget or drv) depsBuildTarget)
]
[
(map (drv: drv.__spliced.hostHost or drv) depsHostHost)
(map (drv: drv.crossDrv or drv) (buildInputs
++ lib.optionals doCheck checkInputs
++ lib.optionals doInstallCheck' installCheckInputs))
stdenv: Fix handling of dependencies and hooks 4 far-reaching changes: Smaller PATH, New vars, different propagation logic, and different hook logic Smaller PATH ------------ `buildInputs` no longer go on the PATH at build time, as they cannot be run when cross compiling and we don't want to special case. Simply make a `nativeBuildInput` too if one needs them on the PATH. Fixes #21191. Many new depedendency variables ------------------------------- See the stdenv chapter of the nixpkgs manual. I pulled out the existing documentation of dependency specification into a new section, and added language for these two (and their propagated equivalents) along side the others'. More complex propagation logic ------------------------------ Before a propagated*XXX*Input always acted as if it was specified directly as a *XXX*Input downstream. That's simple enough, but violates the intended roles of each sort of dep, which has functional and not just stylistic consequences. The new algorithm is detailed in the manual, and ensures everything ends up in the right place. I tried to give both an informal and formal description, but I suspect in practice it will not make much sense until one tries cross compiling, after which it will immediately make sense as the only sane option. Simplified hook logic --------------------- Rather than `envHook` and `crossEnvHook`, whose behavior differs depending on whether we are cross compiling or not, there is now one hook per sort (or rather non-propagated and propagated pair of sorts) of dependency. These new hooks have the same meaning regardless of cross compilation. See the setup hook section of stdenv chapter of the Nixpkgs manual for more details.
2017-09-11 17:20:20 +01:00
]
[
(map (drv: drv.__spliced.targetTarget or drv) depsTargetTarget)
]
];
stdenv: Fix handling of dependencies and hooks 4 far-reaching changes: Smaller PATH, New vars, different propagation logic, and different hook logic Smaller PATH ------------ `buildInputs` no longer go on the PATH at build time, as they cannot be run when cross compiling and we don't want to special case. Simply make a `nativeBuildInput` too if one needs them on the PATH. Fixes #21191. Many new depedendency variables ------------------------------- See the stdenv chapter of the nixpkgs manual. I pulled out the existing documentation of dependency specification into a new section, and added language for these two (and their propagated equivalents) along side the others'. More complex propagation logic ------------------------------ Before a propagated*XXX*Input always acted as if it was specified directly as a *XXX*Input downstream. That's simple enough, but violates the intended roles of each sort of dep, which has functional and not just stylistic consequences. The new algorithm is detailed in the manual, and ensures everything ends up in the right place. I tried to give both an informal and formal description, but I suspect in practice it will not make much sense until one tries cross compiling, after which it will immediately make sense as the only sane option. Simplified hook logic --------------------- Rather than `envHook` and `crossEnvHook`, whose behavior differs depending on whether we are cross compiling or not, there is now one hook per sort (or rather non-propagated and propagated pair of sorts) of dependency. These new hooks have the same meaning regardless of cross compilation. See the setup hook section of stdenv chapter of the Nixpkgs manual for more details.
2017-09-11 17:20:20 +01:00
propagatedDependencies = map (map lib.chooseDevOutputs) [
[
(map (drv: drv.__spliced.buildBuild or drv) depsBuildBuildPropagated)
(map (drv: drv.nativeDrv or drv) propagatedNativeBuildInputs)
(map (drv: drv.__spliced.buildTarget or drv) depsBuildTargetPropagated)
]
[
(map (drv: drv.__spliced.hostHost or drv) depsHostHostPropagated)
(map (drv: drv.crossDrv or drv) propagatedBuildInputs)
]
[
(map (drv: drv.__spliced.targetTarget or drv) depsTargetTargetPropagated)
]
];
2018-04-25 19:49:44 +01:00
computedSandboxProfile =
lib.concatMap (input: input.__propagatedSandboxProfile or [])
(stdenv.extraNativeBuildInputs
++ stdenv.extraBuildInputs
++ lib.concatLists dependencies);
computedPropagatedSandboxProfile =
lib.concatMap (input: input.__propagatedSandboxProfile or [])
(lib.concatLists propagatedDependencies);
computedImpureHostDeps =
lib.unique (lib.concatMap (input: input.__propagatedImpureHostDeps or [])
(stdenv.extraNativeBuildInputs
++ stdenv.extraBuildInputs
++ lib.concatLists dependencies));
computedPropagatedImpureHostDeps =
lib.unique (lib.concatMap (input: input.__propagatedImpureHostDeps or [])
(lib.concatLists propagatedDependencies));
derivationArg =
(removeAttrs attrs
["meta" "passthru" "pos"
"checkInputs" "installCheckInputs"
"__impureHostDeps" "__propagatedImpureHostDeps"
"sandboxProfile" "propagatedSandboxProfile"])
2018-04-25 19:49:44 +01:00
// {
# A hack to make `nix-env -qa` and `nix search` ignore broken packages.
# TODO(@oxij): remove this assert when something like NixOS/nix#1771 gets merged into nix.
name = assert selfConsistent && validity.handled && (separateDebugInfo -> stdenv.hostPlatform.isLinux); computedName + lib.optionalString
# Fixed-output derivations like source tarballs shouldn't get a host
# suffix. But we have some weird ones with run-time deps that are
# just used for their side-affects. Those might as well since the
# hash can't be the same. See #32986.
(stdenv.hostPlatform != stdenv.buildPlatform && runtimeSensativeIfFixedOutput)
("-" + stdenv.hostPlatform.config);
builder = attrs.realBuilder or stdenv.shell;
args = attrs.args or ["-e" (attrs.builder or ./default-builder.sh)];
inherit stdenv;
# The `system` attribute of a derivation has special meaning to Nix.
# Derivations set it to choose what sort of machine could be used to
# execute the build, The build platform entirely determines this,
# indeed more finely than Nix knows or cares about. The `system`
# attribute of `buildPlatfom` matches Nix's degree of specificity.
# exactly.
inherit (stdenv.buildPlatform) system;
userHook = config.stdenv.userHook or null;
__ignoreNulls = true;
inherit strictDeps;
stdenv: Fix handling of dependencies and hooks 4 far-reaching changes: Smaller PATH, New vars, different propagation logic, and different hook logic Smaller PATH ------------ `buildInputs` no longer go on the PATH at build time, as they cannot be run when cross compiling and we don't want to special case. Simply make a `nativeBuildInput` too if one needs them on the PATH. Fixes #21191. Many new depedendency variables ------------------------------- See the stdenv chapter of the nixpkgs manual. I pulled out the existing documentation of dependency specification into a new section, and added language for these two (and their propagated equivalents) along side the others'. More complex propagation logic ------------------------------ Before a propagated*XXX*Input always acted as if it was specified directly as a *XXX*Input downstream. That's simple enough, but violates the intended roles of each sort of dep, which has functional and not just stylistic consequences. The new algorithm is detailed in the manual, and ensures everything ends up in the right place. I tried to give both an informal and formal description, but I suspect in practice it will not make much sense until one tries cross compiling, after which it will immediately make sense as the only sane option. Simplified hook logic --------------------- Rather than `envHook` and `crossEnvHook`, whose behavior differs depending on whether we are cross compiling or not, there is now one hook per sort (or rather non-propagated and propagated pair of sorts) of dependency. These new hooks have the same meaning regardless of cross compilation. See the setup hook section of stdenv chapter of the Nixpkgs manual for more details.
2017-09-11 17:20:20 +01:00
depsBuildBuild = lib.elemAt (lib.elemAt dependencies 0) 0;
nativeBuildInputs = lib.elemAt (lib.elemAt dependencies 0) 1;
depsBuildTarget = lib.elemAt (lib.elemAt dependencies 0) 2;
depsHostHost = lib.elemAt (lib.elemAt dependencies 1) 0;
stdenv: Fix handling of dependencies and hooks 4 far-reaching changes: Smaller PATH, New vars, different propagation logic, and different hook logic Smaller PATH ------------ `buildInputs` no longer go on the PATH at build time, as they cannot be run when cross compiling and we don't want to special case. Simply make a `nativeBuildInput` too if one needs them on the PATH. Fixes #21191. Many new depedendency variables ------------------------------- See the stdenv chapter of the nixpkgs manual. I pulled out the existing documentation of dependency specification into a new section, and added language for these two (and their propagated equivalents) along side the others'. More complex propagation logic ------------------------------ Before a propagated*XXX*Input always acted as if it was specified directly as a *XXX*Input downstream. That's simple enough, but violates the intended roles of each sort of dep, which has functional and not just stylistic consequences. The new algorithm is detailed in the manual, and ensures everything ends up in the right place. I tried to give both an informal and formal description, but I suspect in practice it will not make much sense until one tries cross compiling, after which it will immediately make sense as the only sane option. Simplified hook logic --------------------- Rather than `envHook` and `crossEnvHook`, whose behavior differs depending on whether we are cross compiling or not, there is now one hook per sort (or rather non-propagated and propagated pair of sorts) of dependency. These new hooks have the same meaning regardless of cross compilation. See the setup hook section of stdenv chapter of the Nixpkgs manual for more details.
2017-09-11 17:20:20 +01:00
buildInputs = lib.elemAt (lib.elemAt dependencies 1) 1;
depsTargetTarget = lib.elemAt (lib.elemAt dependencies 2) 0;
stdenv: Fix handling of dependencies and hooks 4 far-reaching changes: Smaller PATH, New vars, different propagation logic, and different hook logic Smaller PATH ------------ `buildInputs` no longer go on the PATH at build time, as they cannot be run when cross compiling and we don't want to special case. Simply make a `nativeBuildInput` too if one needs them on the PATH. Fixes #21191. Many new depedendency variables ------------------------------- See the stdenv chapter of the nixpkgs manual. I pulled out the existing documentation of dependency specification into a new section, and added language for these two (and their propagated equivalents) along side the others'. More complex propagation logic ------------------------------ Before a propagated*XXX*Input always acted as if it was specified directly as a *XXX*Input downstream. That's simple enough, but violates the intended roles of each sort of dep, which has functional and not just stylistic consequences. The new algorithm is detailed in the manual, and ensures everything ends up in the right place. I tried to give both an informal and formal description, but I suspect in practice it will not make much sense until one tries cross compiling, after which it will immediately make sense as the only sane option. Simplified hook logic --------------------- Rather than `envHook` and `crossEnvHook`, whose behavior differs depending on whether we are cross compiling or not, there is now one hook per sort (or rather non-propagated and propagated pair of sorts) of dependency. These new hooks have the same meaning regardless of cross compilation. See the setup hook section of stdenv chapter of the Nixpkgs manual for more details.
2017-09-11 17:20:20 +01:00
depsBuildBuildPropagated = lib.elemAt (lib.elemAt propagatedDependencies 0) 0;
propagatedNativeBuildInputs = lib.elemAt (lib.elemAt propagatedDependencies 0) 1;
depsBuildTargetPropagated = lib.elemAt (lib.elemAt propagatedDependencies 0) 2;
depsHostHostPropagated = lib.elemAt (lib.elemAt propagatedDependencies 1) 0;
stdenv: Fix handling of dependencies and hooks 4 far-reaching changes: Smaller PATH, New vars, different propagation logic, and different hook logic Smaller PATH ------------ `buildInputs` no longer go on the PATH at build time, as they cannot be run when cross compiling and we don't want to special case. Simply make a `nativeBuildInput` too if one needs them on the PATH. Fixes #21191. Many new depedendency variables ------------------------------- See the stdenv chapter of the nixpkgs manual. I pulled out the existing documentation of dependency specification into a new section, and added language for these two (and their propagated equivalents) along side the others'. More complex propagation logic ------------------------------ Before a propagated*XXX*Input always acted as if it was specified directly as a *XXX*Input downstream. That's simple enough, but violates the intended roles of each sort of dep, which has functional and not just stylistic consequences. The new algorithm is detailed in the manual, and ensures everything ends up in the right place. I tried to give both an informal and formal description, but I suspect in practice it will not make much sense until one tries cross compiling, after which it will immediately make sense as the only sane option. Simplified hook logic --------------------- Rather than `envHook` and `crossEnvHook`, whose behavior differs depending on whether we are cross compiling or not, there is now one hook per sort (or rather non-propagated and propagated pair of sorts) of dependency. These new hooks have the same meaning regardless of cross compilation. See the setup hook section of stdenv chapter of the Nixpkgs manual for more details.
2017-09-11 17:20:20 +01:00
propagatedBuildInputs = lib.elemAt (lib.elemAt propagatedDependencies 1) 1;
depsTargetTargetPropagated = lib.elemAt (lib.elemAt propagatedDependencies 2) 0;
# This parameter is sometimes a string, sometimes null, and sometimes a list, yuck
configureFlags = let inherit (lib) optional elem; in
(/**/ if lib.isString configureFlags then [configureFlags]
else if configureFlags == null then []
else configureFlags)
++ optional (elem "build" configurePlatforms) "--build=${stdenv.buildPlatform.config}"
++ optional (elem "host" configurePlatforms) "--host=${stdenv.hostPlatform.config}"
++ optional (elem "target" configurePlatforms) "--target=${stdenv.targetPlatform.config}";
inherit doCheck doInstallCheck;
2018-08-05 20:24:46 +01:00
inherit outputs;
} // lib.optionalAttrs strictDeps {
# Make sure "build" dependencies dont leak into outputs. We
# want to disallow references to depsBuildBuild,
# nativeBuildInputs, and depsBuildTarget. But depsHostHost,
# buildInputs, and depsTargetTarget is okay, so we subtract
# those from disallowedReferences in case a dependency is
# listed in multiple dependency lists. We also include
# propagated dependencies here as well.
disallowedReferences = (attrs.disallowedReferences or [])
++ (lib.subtractLists
(lib.concatLists ((lib.elemAt propagatedDependencies 0) ++
(lib.elemAt propagatedDependencies 1) ++
(lib.elemAt dependencies 1) ++
(lib.elemAt propagatedDependencies 2) ++
(lib.elemAt dependencies 2) ) )
(lib.concatLists ((lib.elemAt dependencies 0)) ) );
} // lib.optionalAttrs (stdenv.hostPlatform != stdenv.buildPlatform) {
cmakeFlags =
(/**/ if lib.isString cmakeFlags then [cmakeFlags]
else if cmakeFlags == null then []
else cmakeFlags)
++ lib.optional (stdenv.hostPlatform.uname.system != null) "-DCMAKE_SYSTEM_NAME=${stdenv.hostPlatform.uname.system}"
++ lib.optional (stdenv.hostPlatform.uname.processor != null) "-DCMAKE_SYSTEM_PROCESSOR=${stdenv.hostPlatform.uname.processor}"
++ lib.optional (stdenv.hostPlatform.uname.release != null) "-DCMAKE_SYSTEM_VERSION=${stdenv.hostPlatform.release}"
++ lib.optional (stdenv.buildPlatform.uname.system != null) "-DCMAKE_HOST_SYSTEM_NAME=${stdenv.buildPlatform.uname.system}"
++ lib.optional (stdenv.buildPlatform.uname.processor != null) "-DCMAKE_HOST_SYSTEM_PROCESSOR=${stdenv.buildPlatform.uname.processor}"
++ lib.optional (stdenv.buildPlatform.uname.release != null) "-DCMAKE_HOST_SYSTEM_VERSION=${stdenv.buildPlatform.uname.release}";
} // lib.optionalAttrs (attrs.enableParallelBuilding or false) {
enableParallelChecking = attrs.enableParallelChecking or true;
} // lib.optionalAttrs (hardeningDisable != [] || hardeningEnable != []) {
NIX_HARDENING_ENABLE = enabledHardeningOptions;
} // lib.optionalAttrs (stdenv.buildPlatform.isDarwin) {
# TODO: remove lib.unique once nix has a list canonicalization primitive
__sandboxProfile =
let profiles = [ stdenv.extraSandboxProfile ] ++ computedSandboxProfile ++ computedPropagatedSandboxProfile ++ [ propagatedSandboxProfile sandboxProfile ];
final = lib.concatStringsSep "\n" (lib.filter (x: x != "") (lib.unique profiles));
in final;
__propagatedSandboxProfile = lib.unique (computedPropagatedSandboxProfile ++ [ propagatedSandboxProfile ]);
__impureHostDeps = computedImpureHostDeps ++ computedPropagatedImpureHostDeps ++ __propagatedImpureHostDeps ++ __impureHostDeps ++ stdenv.__extraImpureHostDeps ++ [
"/dev/zero"
"/dev/random"
"/dev/urandom"
"/bin/sh"
];
__propagatedImpureHostDeps = computedPropagatedImpureHostDeps ++ __propagatedImpureHostDeps;
2018-04-25 19:49:44 +01:00
};
stdenv: perform checks only when evaluating .drv and .out This pushes check-meta evaluation to derivation evaluation step, leaving all other attributes accessible. Before this commit: > $ HOME=/homeless-shelter NIX_PATH=nixpkgs=$(pwd) nix-instantiate --eval --strict ./default.nix -A xen --argstr system aarch64-linux > Package ‘xen-4.5.5’ in pkgs/applications/virtualization/xen/generic.nix:226 is not supported on ‘aarch64-linux’, refusing to evaluate. as expected > $ HOME=/homeless-shelter NIX_PATH=nixpkgs=$(pwd) nix-instantiate --eval --strict ./default.nix -A xen.name --argstr system aarch64-linux > Package ‘xen-4.5.5’ in pkgs/applications/virtualization/xen/generic.nix:226 is not supported on ‘aarch64-linux’, refusing to evaluate. > $ HOME=/homeless-shelter NIX_PATH=nixpkgs=$(pwd) nix-instantiate --eval --strict ./default.nix -A xen.meta.description --argstr system aarch64-linux > Package ‘xen-4.5.5’ in pkgs/applications/virtualization/xen/generic.nix:226 is not supported on ‘aarch64-linux’, refusing to evaluate. which is unfortunate since its impossible to use packages in autogenerated documentation on all platforms. After this commit: > $ HOME=/homeless-shelter NIX_PATH=nixpkgs=$(pwd) nix-instantiate --eval --strict ./default.nix -A xen --argstr system aarch64-linux still fails > $ HOME=/homeless-shelter NIX_PATH=nixpkgs=$(pwd) nix-instantiate --eval --strict ./default.nix -A xen.name --argstr system aarch64-linux > "xen-4.5.5" > $ HOME=/homeless-shelter NIX_PATH=nixpkgs=$(pwd) nix-instantiate --eval --strict ./default.nix -A xen.meta.description --argstr system aarch64-linux > "Xen hypervisor and related components (vanilla)"
2017-12-25 17:38:45 +00:00
validity = import ./check-meta.nix {
2018-01-31 03:10:34 +00:00
inherit lib config meta;
stdenv: perform checks only when evaluating .drv and .out This pushes check-meta evaluation to derivation evaluation step, leaving all other attributes accessible. Before this commit: > $ HOME=/homeless-shelter NIX_PATH=nixpkgs=$(pwd) nix-instantiate --eval --strict ./default.nix -A xen --argstr system aarch64-linux > Package ‘xen-4.5.5’ in pkgs/applications/virtualization/xen/generic.nix:226 is not supported on ‘aarch64-linux’, refusing to evaluate. as expected > $ HOME=/homeless-shelter NIX_PATH=nixpkgs=$(pwd) nix-instantiate --eval --strict ./default.nix -A xen.name --argstr system aarch64-linux > Package ‘xen-4.5.5’ in pkgs/applications/virtualization/xen/generic.nix:226 is not supported on ‘aarch64-linux’, refusing to evaluate. > $ HOME=/homeless-shelter NIX_PATH=nixpkgs=$(pwd) nix-instantiate --eval --strict ./default.nix -A xen.meta.description --argstr system aarch64-linux > Package ‘xen-4.5.5’ in pkgs/applications/virtualization/xen/generic.nix:226 is not supported on ‘aarch64-linux’, refusing to evaluate. which is unfortunate since its impossible to use packages in autogenerated documentation on all platforms. After this commit: > $ HOME=/homeless-shelter NIX_PATH=nixpkgs=$(pwd) nix-instantiate --eval --strict ./default.nix -A xen --argstr system aarch64-linux still fails > $ HOME=/homeless-shelter NIX_PATH=nixpkgs=$(pwd) nix-instantiate --eval --strict ./default.nix -A xen.name --argstr system aarch64-linux > "xen-4.5.5" > $ HOME=/homeless-shelter NIX_PATH=nixpkgs=$(pwd) nix-instantiate --eval --strict ./default.nix -A xen.meta.description --argstr system aarch64-linux > "Xen hypervisor and related components (vanilla)"
2017-12-25 17:38:45 +00:00
# Nix itself uses the `system` field of a derivation to decide where
# to build it. This is a bit confusing for cross compilation.
inherit (stdenv) hostPlatform;
2018-01-31 03:10:34 +00:00
} attrs;
stdenv: perform checks only when evaluating .drv and .out This pushes check-meta evaluation to derivation evaluation step, leaving all other attributes accessible. Before this commit: > $ HOME=/homeless-shelter NIX_PATH=nixpkgs=$(pwd) nix-instantiate --eval --strict ./default.nix -A xen --argstr system aarch64-linux > Package ‘xen-4.5.5’ in pkgs/applications/virtualization/xen/generic.nix:226 is not supported on ‘aarch64-linux’, refusing to evaluate. as expected > $ HOME=/homeless-shelter NIX_PATH=nixpkgs=$(pwd) nix-instantiate --eval --strict ./default.nix -A xen.name --argstr system aarch64-linux > Package ‘xen-4.5.5’ in pkgs/applications/virtualization/xen/generic.nix:226 is not supported on ‘aarch64-linux’, refusing to evaluate. > $ HOME=/homeless-shelter NIX_PATH=nixpkgs=$(pwd) nix-instantiate --eval --strict ./default.nix -A xen.meta.description --argstr system aarch64-linux > Package ‘xen-4.5.5’ in pkgs/applications/virtualization/xen/generic.nix:226 is not supported on ‘aarch64-linux’, refusing to evaluate. which is unfortunate since its impossible to use packages in autogenerated documentation on all platforms. After this commit: > $ HOME=/homeless-shelter NIX_PATH=nixpkgs=$(pwd) nix-instantiate --eval --strict ./default.nix -A xen --argstr system aarch64-linux still fails > $ HOME=/homeless-shelter NIX_PATH=nixpkgs=$(pwd) nix-instantiate --eval --strict ./default.nix -A xen.name --argstr system aarch64-linux > "xen-4.5.5" > $ HOME=/homeless-shelter NIX_PATH=nixpkgs=$(pwd) nix-instantiate --eval --strict ./default.nix -A xen.meta.description --argstr system aarch64-linux > "Xen hypervisor and related components (vanilla)"
2017-12-25 17:38:45 +00:00
# The meta attribute is passed in the resulting attribute set,
# but it's not part of the actual derivation, i.e., it's not
# passed to the builder and is not a dependency. But since we
# include it in the result, it *is* available to nix-env for queries.
2018-01-02 14:52:27 +00:00
meta = {
2018-01-03 15:22:35 +00:00
# `name` above includes cross-compilation cruft (and is under assert),
# lets have a clean always accessible version here.
name = computedName;
2018-01-03 15:22:35 +00:00
# If the packager hasn't specified `outputsToInstall`, choose a default,
# which is the name of `p.bin or p.out or p`;
# if he has specified it, it will be overridden below in `// meta`.
# Note: This default probably shouldn't be globally configurable.
# Services and users should specify outputs explicitly,
# unless they are comfortable with this default.
2018-01-02 14:52:27 +00:00
outputsToInstall =
let
2018-08-05 20:24:46 +01:00
hasOutput = out: builtins.elem out outputs;
in [( lib.findFirst hasOutput null (["bin" "out"] ++ outputs) )];
}
// attrs.meta or {}
2018-01-02 14:52:27 +00:00
# Fill `meta.position` to identify the source location of the package.
// lib.optionalAttrs (pos != null) {
position = pos.file + ":" + toString pos.line;
# Expose the result of the checks for everyone to see.
} // {
available = validity.valid
&& (if config.checkMetaRecursively or false
then lib.all (d: d.meta.available or true) references
else true);
2018-01-02 14:52:27 +00:00
};
in
stdenv: perform checks only when evaluating .drv and .out This pushes check-meta evaluation to derivation evaluation step, leaving all other attributes accessible. Before this commit: > $ HOME=/homeless-shelter NIX_PATH=nixpkgs=$(pwd) nix-instantiate --eval --strict ./default.nix -A xen --argstr system aarch64-linux > Package ‘xen-4.5.5’ in pkgs/applications/virtualization/xen/generic.nix:226 is not supported on ‘aarch64-linux’, refusing to evaluate. as expected > $ HOME=/homeless-shelter NIX_PATH=nixpkgs=$(pwd) nix-instantiate --eval --strict ./default.nix -A xen.name --argstr system aarch64-linux > Package ‘xen-4.5.5’ in pkgs/applications/virtualization/xen/generic.nix:226 is not supported on ‘aarch64-linux’, refusing to evaluate. > $ HOME=/homeless-shelter NIX_PATH=nixpkgs=$(pwd) nix-instantiate --eval --strict ./default.nix -A xen.meta.description --argstr system aarch64-linux > Package ‘xen-4.5.5’ in pkgs/applications/virtualization/xen/generic.nix:226 is not supported on ‘aarch64-linux’, refusing to evaluate. which is unfortunate since its impossible to use packages in autogenerated documentation on all platforms. After this commit: > $ HOME=/homeless-shelter NIX_PATH=nixpkgs=$(pwd) nix-instantiate --eval --strict ./default.nix -A xen --argstr system aarch64-linux still fails > $ HOME=/homeless-shelter NIX_PATH=nixpkgs=$(pwd) nix-instantiate --eval --strict ./default.nix -A xen.name --argstr system aarch64-linux > "xen-4.5.5" > $ HOME=/homeless-shelter NIX_PATH=nixpkgs=$(pwd) nix-instantiate --eval --strict ./default.nix -A xen.meta.description --argstr system aarch64-linux > "Xen hypervisor and related components (vanilla)"
2017-12-25 17:38:45 +00:00
lib.extendDerivation
validity.handled
({
overrideAttrs = f: mkDerivation (attrs // (f attrs));
inherit meta passthru;
} //
# Pass through extra attributes that are not inputs, but
# should be made available to Nix expressions using the
# derivation (e.g., in assertions).
passthru)
(derivation derivationArg);
}