ruby: new bundler infrastructure
This improves our Bundler integration (i.e. `bundlerEnv`).
Before describing the implementation differences, I'd like to point a
breaking change: buildRubyGem now expects `gemName` and `version` as
arguments, rather than a `name` attribute in the form of
"<gem-name>-<version>".
Now for the differences in implementation.
The previous implementation installed all gems at once in a single
derivation. This was made possible by using a set of monkey-patches to
prevent Bundler from downloading gems impurely, and to help Bundler
find and activate all required gems prior to installation. This had
several downsides:
* The patches were really hard to understand, and required subtle
interaction with the rest of the build environment.
* A single install failure would cause the entire derivation to fail.
The new implementation takes a different approach: we install gems into
separate derivations, and then present Bundler with a symlink forest
thereof. This has a couple benefits over the existing approach:
* Fewer patches are required, with less interplay with the rest of the
build environment.
* Changes to one gem no longer cause a rebuild of the entire dependency
graph.
* Builds take 20% less time (using gitlab as a reference).
It's unfortunate that we still have to muck with Bundler's internals,
though it's unavoidable with the way that Bundler is currently designed.
There are a number improvements that could be made in Bundler that would
simplify our packaging story:
* Bundler requires all installed gems reside within the same prefix
(GEM_HOME), unlike RubyGems which allows for multiple prefixes to
be specified through GEM_PATH. It would be ideal if Bundler allowed
for packages to be installed and sourced from multiple prefixes.
* Bundler installs git sources very differently from how RubyGems
installs gem packages, and, unlike RubyGems, it doesn't provide a
public interface (CLI or programmatic) to guide the installation of a
single gem. We are presented with the options of either
reimplementing a considerable portion Bundler, or patch and use parts
of its internals; I choose the latter. Ideally, there would be a way
to install gems from git sources in a manner similar to how we drive
`gem` to install gem packages.
* When a bundled program is executed (via `bundle exec` or a
binstub that does `require 'bundler/setup'`), the setup process reads
the Gemfile.lock, activates the dependencies, re-serializes the lock
file it read earlier, and then attempts to overwrite the Gemfile.lock
if the contents aren't bit-identical. I think the reasoning is that
by merely running an application with a newer version of Bundler, you'll
automatically keep the Gemfile.lock up-to-date with any changes in the
format. Unfortunately, that doesn't play well with any form of
packaging, because bundler will immediately cause the application to
abort when it attempts to write to the read-only Gemfile.lock in the
store. We work around this by normalizing the Gemfile.lock with the
version of Bundler that we'll use at runtime before we copy it into
the store. This feels fragile, but it's the best we can do without
changes upstream, or resorting to more delicate hacks.
With all of the challenges in using Bundler, one might wonder why we
can't just cut Bundler out of the picture and use RubyGems. After all,
Nix provides most of the isolation that Bundler is used for anyway.
The problem, however, is that almost every Rails application calls
`Bundler::require` at startup (by way of the default project templates).
Because bundler will then, by default, `require` each gem listed in the
Gemfile, Rails applications are almost always written such that none of
the source files explicitly require their dependencies. That leaves us
with two options: support and use Bundler, or maintain massive patches
for every Rails application that we package.
Closes #8612
2015-11-15 02:17:29 +00:00
|
|
|
# This builds gems in a way that is compatible with bundler.
|
|
|
|
|
#
|
|
|
|
|
# Bundler installs gems from git sources _very_ differently from how RubyGems
|
|
|
|
|
# installes gem packages, though they both install gem packages similarly.
|
|
|
|
|
#
|
|
|
|
|
# We monkey-patch Bundler to remove any impurities and then drive its internals
|
|
|
|
|
# to install git gems.
|
|
|
|
|
#
|
|
|
|
|
# For the sake of simplicity, gem packages are installed with the standard `gem`
|
|
|
|
|
# program.
|
|
|
|
|
#
|
|
|
|
|
# Note that bundler does not support multiple prefixes; it assumes that all
|
|
|
|
|
# gems are installed in a common prefix, and has no support for specifying
|
|
|
|
|
# otherwise. Therefore, if you want to be able to use the resulting derivations
|
|
|
|
|
# with bundler, you need to create a symlink forrest first, which is what
|
|
|
|
|
# `bundlerEnv` does for you.
|
|
|
|
|
#
|
|
|
|
|
# Normal gem packages can be used outside of bundler; a binstub is created in
|
|
|
|
|
# $out/bin.
|
|
|
|
|
|
2016-06-12 18:11:37 +01:00
|
|
|
{ lib, fetchurl, fetchgit, makeWrapper, git, darwin
|
|
|
|
|
, ruby, bundler
|
ruby: new bundler infrastructure
This improves our Bundler integration (i.e. `bundlerEnv`).
Before describing the implementation differences, I'd like to point a
breaking change: buildRubyGem now expects `gemName` and `version` as
arguments, rather than a `name` attribute in the form of
"<gem-name>-<version>".
Now for the differences in implementation.
The previous implementation installed all gems at once in a single
derivation. This was made possible by using a set of monkey-patches to
prevent Bundler from downloading gems impurely, and to help Bundler
find and activate all required gems prior to installation. This had
several downsides:
* The patches were really hard to understand, and required subtle
interaction with the rest of the build environment.
* A single install failure would cause the entire derivation to fail.
The new implementation takes a different approach: we install gems into
separate derivations, and then present Bundler with a symlink forest
thereof. This has a couple benefits over the existing approach:
* Fewer patches are required, with less interplay with the rest of the
build environment.
* Changes to one gem no longer cause a rebuild of the entire dependency
graph.
* Builds take 20% less time (using gitlab as a reference).
It's unfortunate that we still have to muck with Bundler's internals,
though it's unavoidable with the way that Bundler is currently designed.
There are a number improvements that could be made in Bundler that would
simplify our packaging story:
* Bundler requires all installed gems reside within the same prefix
(GEM_HOME), unlike RubyGems which allows for multiple prefixes to
be specified through GEM_PATH. It would be ideal if Bundler allowed
for packages to be installed and sourced from multiple prefixes.
* Bundler installs git sources very differently from how RubyGems
installs gem packages, and, unlike RubyGems, it doesn't provide a
public interface (CLI or programmatic) to guide the installation of a
single gem. We are presented with the options of either
reimplementing a considerable portion Bundler, or patch and use parts
of its internals; I choose the latter. Ideally, there would be a way
to install gems from git sources in a manner similar to how we drive
`gem` to install gem packages.
* When a bundled program is executed (via `bundle exec` or a
binstub that does `require 'bundler/setup'`), the setup process reads
the Gemfile.lock, activates the dependencies, re-serializes the lock
file it read earlier, and then attempts to overwrite the Gemfile.lock
if the contents aren't bit-identical. I think the reasoning is that
by merely running an application with a newer version of Bundler, you'll
automatically keep the Gemfile.lock up-to-date with any changes in the
format. Unfortunately, that doesn't play well with any form of
packaging, because bundler will immediately cause the application to
abort when it attempts to write to the read-only Gemfile.lock in the
store. We work around this by normalizing the Gemfile.lock with the
version of Bundler that we'll use at runtime before we copy it into
the store. This feels fragile, but it's the best we can do without
changes upstream, or resorting to more delicate hacks.
With all of the challenges in using Bundler, one might wonder why we
can't just cut Bundler out of the picture and use RubyGems. After all,
Nix provides most of the isolation that Bundler is used for anyway.
The problem, however, is that almost every Rails application calls
`Bundler::require` at startup (by way of the default project templates).
Because bundler will then, by default, `require` each gem listed in the
Gemfile, Rails applications are almost always written such that none of
the source files explicitly require their dependencies. That leaves us
with two options: support and use Bundler, or maintain massive patches
for every Rails application that we package.
Closes #8612
2015-11-15 02:17:29 +00:00
|
|
|
} @ defs:
|
|
|
|
|
|
|
|
|
|
lib.makeOverridable (
|
|
|
|
|
|
|
|
|
|
{ name ? null
|
|
|
|
|
, gemName
|
|
|
|
|
, version ? null
|
|
|
|
|
, type ? "gem"
|
|
|
|
|
, document ? [] # e.g. [ "ri" "rdoc" ]
|
|
|
|
|
, platform ? "ruby"
|
|
|
|
|
, ruby ? defs.ruby
|
|
|
|
|
, stdenv ? ruby.stdenv
|
2016-02-07 15:39:39 +00:00
|
|
|
, namePrefix ? (let
|
|
|
|
|
rubyName = builtins.parseDrvName ruby.name;
|
|
|
|
|
in "${rubyName.name}${rubyName.version}-")
|
ruby: new bundler infrastructure
This improves our Bundler integration (i.e. `bundlerEnv`).
Before describing the implementation differences, I'd like to point a
breaking change: buildRubyGem now expects `gemName` and `version` as
arguments, rather than a `name` attribute in the form of
"<gem-name>-<version>".
Now for the differences in implementation.
The previous implementation installed all gems at once in a single
derivation. This was made possible by using a set of monkey-patches to
prevent Bundler from downloading gems impurely, and to help Bundler
find and activate all required gems prior to installation. This had
several downsides:
* The patches were really hard to understand, and required subtle
interaction with the rest of the build environment.
* A single install failure would cause the entire derivation to fail.
The new implementation takes a different approach: we install gems into
separate derivations, and then present Bundler with a symlink forest
thereof. This has a couple benefits over the existing approach:
* Fewer patches are required, with less interplay with the rest of the
build environment.
* Changes to one gem no longer cause a rebuild of the entire dependency
graph.
* Builds take 20% less time (using gitlab as a reference).
It's unfortunate that we still have to muck with Bundler's internals,
though it's unavoidable with the way that Bundler is currently designed.
There are a number improvements that could be made in Bundler that would
simplify our packaging story:
* Bundler requires all installed gems reside within the same prefix
(GEM_HOME), unlike RubyGems which allows for multiple prefixes to
be specified through GEM_PATH. It would be ideal if Bundler allowed
for packages to be installed and sourced from multiple prefixes.
* Bundler installs git sources very differently from how RubyGems
installs gem packages, and, unlike RubyGems, it doesn't provide a
public interface (CLI or programmatic) to guide the installation of a
single gem. We are presented with the options of either
reimplementing a considerable portion Bundler, or patch and use parts
of its internals; I choose the latter. Ideally, there would be a way
to install gems from git sources in a manner similar to how we drive
`gem` to install gem packages.
* When a bundled program is executed (via `bundle exec` or a
binstub that does `require 'bundler/setup'`), the setup process reads
the Gemfile.lock, activates the dependencies, re-serializes the lock
file it read earlier, and then attempts to overwrite the Gemfile.lock
if the contents aren't bit-identical. I think the reasoning is that
by merely running an application with a newer version of Bundler, you'll
automatically keep the Gemfile.lock up-to-date with any changes in the
format. Unfortunately, that doesn't play well with any form of
packaging, because bundler will immediately cause the application to
abort when it attempts to write to the read-only Gemfile.lock in the
store. We work around this by normalizing the Gemfile.lock with the
version of Bundler that we'll use at runtime before we copy it into
the store. This feels fragile, but it's the best we can do without
changes upstream, or resorting to more delicate hacks.
With all of the challenges in using Bundler, one might wonder why we
can't just cut Bundler out of the picture and use RubyGems. After all,
Nix provides most of the isolation that Bundler is used for anyway.
The problem, however, is that almost every Rails application calls
`Bundler::require` at startup (by way of the default project templates).
Because bundler will then, by default, `require` each gem listed in the
Gemfile, Rails applications are almost always written such that none of
the source files explicitly require their dependencies. That leaves us
with two options: support and use Bundler, or maintain massive patches
for every Rails application that we package.
Closes #8612
2015-11-15 02:17:29 +00:00
|
|
|
, buildInputs ? []
|
|
|
|
|
, meta ? {}
|
|
|
|
|
, patches ? []
|
|
|
|
|
, gemPath ? []
|
2020-01-06 22:49:28 +00:00
|
|
|
, dontStrip ? false
|
ruby: new bundler infrastructure
This improves our Bundler integration (i.e. `bundlerEnv`).
Before describing the implementation differences, I'd like to point a
breaking change: buildRubyGem now expects `gemName` and `version` as
arguments, rather than a `name` attribute in the form of
"<gem-name>-<version>".
Now for the differences in implementation.
The previous implementation installed all gems at once in a single
derivation. This was made possible by using a set of monkey-patches to
prevent Bundler from downloading gems impurely, and to help Bundler
find and activate all required gems prior to installation. This had
several downsides:
* The patches were really hard to understand, and required subtle
interaction with the rest of the build environment.
* A single install failure would cause the entire derivation to fail.
The new implementation takes a different approach: we install gems into
separate derivations, and then present Bundler with a symlink forest
thereof. This has a couple benefits over the existing approach:
* Fewer patches are required, with less interplay with the rest of the
build environment.
* Changes to one gem no longer cause a rebuild of the entire dependency
graph.
* Builds take 20% less time (using gitlab as a reference).
It's unfortunate that we still have to muck with Bundler's internals,
though it's unavoidable with the way that Bundler is currently designed.
There are a number improvements that could be made in Bundler that would
simplify our packaging story:
* Bundler requires all installed gems reside within the same prefix
(GEM_HOME), unlike RubyGems which allows for multiple prefixes to
be specified through GEM_PATH. It would be ideal if Bundler allowed
for packages to be installed and sourced from multiple prefixes.
* Bundler installs git sources very differently from how RubyGems
installs gem packages, and, unlike RubyGems, it doesn't provide a
public interface (CLI or programmatic) to guide the installation of a
single gem. We are presented with the options of either
reimplementing a considerable portion Bundler, or patch and use parts
of its internals; I choose the latter. Ideally, there would be a way
to install gems from git sources in a manner similar to how we drive
`gem` to install gem packages.
* When a bundled program is executed (via `bundle exec` or a
binstub that does `require 'bundler/setup'`), the setup process reads
the Gemfile.lock, activates the dependencies, re-serializes the lock
file it read earlier, and then attempts to overwrite the Gemfile.lock
if the contents aren't bit-identical. I think the reasoning is that
by merely running an application with a newer version of Bundler, you'll
automatically keep the Gemfile.lock up-to-date with any changes in the
format. Unfortunately, that doesn't play well with any form of
packaging, because bundler will immediately cause the application to
abort when it attempts to write to the read-only Gemfile.lock in the
store. We work around this by normalizing the Gemfile.lock with the
version of Bundler that we'll use at runtime before we copy it into
the store. This feels fragile, but it's the best we can do without
changes upstream, or resorting to more delicate hacks.
With all of the challenges in using Bundler, one might wonder why we
can't just cut Bundler out of the picture and use RubyGems. After all,
Nix provides most of the isolation that Bundler is used for anyway.
The problem, however, is that almost every Rails application calls
`Bundler::require` at startup (by way of the default project templates).
Because bundler will then, by default, `require` each gem listed in the
Gemfile, Rails applications are almost always written such that none of
the source files explicitly require their dependencies. That leaves us
with two options: support and use Bundler, or maintain massive patches
for every Rails application that we package.
Closes #8612
2015-11-15 02:17:29 +00:00
|
|
|
# Assume we don't have to build unless strictly necessary (e.g. the source is a
|
|
|
|
|
# git checkout).
|
|
|
|
|
# If you need to apply patches, make sure to set `dontBuild = false`;
|
|
|
|
|
, dontBuild ? true
|
2018-10-29 00:48:05 +00:00
|
|
|
, dontInstallManpages ? false
|
ruby: new bundler infrastructure
This improves our Bundler integration (i.e. `bundlerEnv`).
Before describing the implementation differences, I'd like to point a
breaking change: buildRubyGem now expects `gemName` and `version` as
arguments, rather than a `name` attribute in the form of
"<gem-name>-<version>".
Now for the differences in implementation.
The previous implementation installed all gems at once in a single
derivation. This was made possible by using a set of monkey-patches to
prevent Bundler from downloading gems impurely, and to help Bundler
find and activate all required gems prior to installation. This had
several downsides:
* The patches were really hard to understand, and required subtle
interaction with the rest of the build environment.
* A single install failure would cause the entire derivation to fail.
The new implementation takes a different approach: we install gems into
separate derivations, and then present Bundler with a symlink forest
thereof. This has a couple benefits over the existing approach:
* Fewer patches are required, with less interplay with the rest of the
build environment.
* Changes to one gem no longer cause a rebuild of the entire dependency
graph.
* Builds take 20% less time (using gitlab as a reference).
It's unfortunate that we still have to muck with Bundler's internals,
though it's unavoidable with the way that Bundler is currently designed.
There are a number improvements that could be made in Bundler that would
simplify our packaging story:
* Bundler requires all installed gems reside within the same prefix
(GEM_HOME), unlike RubyGems which allows for multiple prefixes to
be specified through GEM_PATH. It would be ideal if Bundler allowed
for packages to be installed and sourced from multiple prefixes.
* Bundler installs git sources very differently from how RubyGems
installs gem packages, and, unlike RubyGems, it doesn't provide a
public interface (CLI or programmatic) to guide the installation of a
single gem. We are presented with the options of either
reimplementing a considerable portion Bundler, or patch and use parts
of its internals; I choose the latter. Ideally, there would be a way
to install gems from git sources in a manner similar to how we drive
`gem` to install gem packages.
* When a bundled program is executed (via `bundle exec` or a
binstub that does `require 'bundler/setup'`), the setup process reads
the Gemfile.lock, activates the dependencies, re-serializes the lock
file it read earlier, and then attempts to overwrite the Gemfile.lock
if the contents aren't bit-identical. I think the reasoning is that
by merely running an application with a newer version of Bundler, you'll
automatically keep the Gemfile.lock up-to-date with any changes in the
format. Unfortunately, that doesn't play well with any form of
packaging, because bundler will immediately cause the application to
abort when it attempts to write to the read-only Gemfile.lock in the
store. We work around this by normalizing the Gemfile.lock with the
version of Bundler that we'll use at runtime before we copy it into
the store. This feels fragile, but it's the best we can do without
changes upstream, or resorting to more delicate hacks.
With all of the challenges in using Bundler, one might wonder why we
can't just cut Bundler out of the picture and use RubyGems. After all,
Nix provides most of the isolation that Bundler is used for anyway.
The problem, however, is that almost every Rails application calls
`Bundler::require` at startup (by way of the default project templates).
Because bundler will then, by default, `require` each gem listed in the
Gemfile, Rails applications are almost always written such that none of
the source files explicitly require their dependencies. That leaves us
with two options: support and use Bundler, or maintain massive patches
for every Rails application that we package.
Closes #8612
2015-11-15 02:17:29 +00:00
|
|
|
, propagatedBuildInputs ? []
|
|
|
|
|
, propagatedUserEnvPkgs ? []
|
2016-07-21 11:42:28 +01:00
|
|
|
, buildFlags ? []
|
ruby: new bundler infrastructure
This improves our Bundler integration (i.e. `bundlerEnv`).
Before describing the implementation differences, I'd like to point a
breaking change: buildRubyGem now expects `gemName` and `version` as
arguments, rather than a `name` attribute in the form of
"<gem-name>-<version>".
Now for the differences in implementation.
The previous implementation installed all gems at once in a single
derivation. This was made possible by using a set of monkey-patches to
prevent Bundler from downloading gems impurely, and to help Bundler
find and activate all required gems prior to installation. This had
several downsides:
* The patches were really hard to understand, and required subtle
interaction with the rest of the build environment.
* A single install failure would cause the entire derivation to fail.
The new implementation takes a different approach: we install gems into
separate derivations, and then present Bundler with a symlink forest
thereof. This has a couple benefits over the existing approach:
* Fewer patches are required, with less interplay with the rest of the
build environment.
* Changes to one gem no longer cause a rebuild of the entire dependency
graph.
* Builds take 20% less time (using gitlab as a reference).
It's unfortunate that we still have to muck with Bundler's internals,
though it's unavoidable with the way that Bundler is currently designed.
There are a number improvements that could be made in Bundler that would
simplify our packaging story:
* Bundler requires all installed gems reside within the same prefix
(GEM_HOME), unlike RubyGems which allows for multiple prefixes to
be specified through GEM_PATH. It would be ideal if Bundler allowed
for packages to be installed and sourced from multiple prefixes.
* Bundler installs git sources very differently from how RubyGems
installs gem packages, and, unlike RubyGems, it doesn't provide a
public interface (CLI or programmatic) to guide the installation of a
single gem. We are presented with the options of either
reimplementing a considerable portion Bundler, or patch and use parts
of its internals; I choose the latter. Ideally, there would be a way
to install gems from git sources in a manner similar to how we drive
`gem` to install gem packages.
* When a bundled program is executed (via `bundle exec` or a
binstub that does `require 'bundler/setup'`), the setup process reads
the Gemfile.lock, activates the dependencies, re-serializes the lock
file it read earlier, and then attempts to overwrite the Gemfile.lock
if the contents aren't bit-identical. I think the reasoning is that
by merely running an application with a newer version of Bundler, you'll
automatically keep the Gemfile.lock up-to-date with any changes in the
format. Unfortunately, that doesn't play well with any form of
packaging, because bundler will immediately cause the application to
abort when it attempts to write to the read-only Gemfile.lock in the
store. We work around this by normalizing the Gemfile.lock with the
version of Bundler that we'll use at runtime before we copy it into
the store. This feels fragile, but it's the best we can do without
changes upstream, or resorting to more delicate hacks.
With all of the challenges in using Bundler, one might wonder why we
can't just cut Bundler out of the picture and use RubyGems. After all,
Nix provides most of the isolation that Bundler is used for anyway.
The problem, however, is that almost every Rails application calls
`Bundler::require` at startup (by way of the default project templates).
Because bundler will then, by default, `require` each gem listed in the
Gemfile, Rails applications are almost always written such that none of
the source files explicitly require their dependencies. That leaves us
with two options: support and use Bundler, or maintain massive patches
for every Rails application that we package.
Closes #8612
2015-11-15 02:17:29 +00:00
|
|
|
, passthru ? {}
|
2020-11-30 11:15:12 +00:00
|
|
|
# bundler expects gems to be stored in the cache directory for certain actions
|
|
|
|
|
# such as `bundler install --redownload`.
|
|
|
|
|
# At the cost of increasing the store size, you can keep the gems to have closer
|
|
|
|
|
# alignment with what Bundler expects.
|
|
|
|
|
, keepGemCache ? false
|
ruby: new bundler infrastructure
This improves our Bundler integration (i.e. `bundlerEnv`).
Before describing the implementation differences, I'd like to point a
breaking change: buildRubyGem now expects `gemName` and `version` as
arguments, rather than a `name` attribute in the form of
"<gem-name>-<version>".
Now for the differences in implementation.
The previous implementation installed all gems at once in a single
derivation. This was made possible by using a set of monkey-patches to
prevent Bundler from downloading gems impurely, and to help Bundler
find and activate all required gems prior to installation. This had
several downsides:
* The patches were really hard to understand, and required subtle
interaction with the rest of the build environment.
* A single install failure would cause the entire derivation to fail.
The new implementation takes a different approach: we install gems into
separate derivations, and then present Bundler with a symlink forest
thereof. This has a couple benefits over the existing approach:
* Fewer patches are required, with less interplay with the rest of the
build environment.
* Changes to one gem no longer cause a rebuild of the entire dependency
graph.
* Builds take 20% less time (using gitlab as a reference).
It's unfortunate that we still have to muck with Bundler's internals,
though it's unavoidable with the way that Bundler is currently designed.
There are a number improvements that could be made in Bundler that would
simplify our packaging story:
* Bundler requires all installed gems reside within the same prefix
(GEM_HOME), unlike RubyGems which allows for multiple prefixes to
be specified through GEM_PATH. It would be ideal if Bundler allowed
for packages to be installed and sourced from multiple prefixes.
* Bundler installs git sources very differently from how RubyGems
installs gem packages, and, unlike RubyGems, it doesn't provide a
public interface (CLI or programmatic) to guide the installation of a
single gem. We are presented with the options of either
reimplementing a considerable portion Bundler, or patch and use parts
of its internals; I choose the latter. Ideally, there would be a way
to install gems from git sources in a manner similar to how we drive
`gem` to install gem packages.
* When a bundled program is executed (via `bundle exec` or a
binstub that does `require 'bundler/setup'`), the setup process reads
the Gemfile.lock, activates the dependencies, re-serializes the lock
file it read earlier, and then attempts to overwrite the Gemfile.lock
if the contents aren't bit-identical. I think the reasoning is that
by merely running an application with a newer version of Bundler, you'll
automatically keep the Gemfile.lock up-to-date with any changes in the
format. Unfortunately, that doesn't play well with any form of
packaging, because bundler will immediately cause the application to
abort when it attempts to write to the read-only Gemfile.lock in the
store. We work around this by normalizing the Gemfile.lock with the
version of Bundler that we'll use at runtime before we copy it into
the store. This feels fragile, but it's the best we can do without
changes upstream, or resorting to more delicate hacks.
With all of the challenges in using Bundler, one might wonder why we
can't just cut Bundler out of the picture and use RubyGems. After all,
Nix provides most of the isolation that Bundler is used for anyway.
The problem, however, is that almost every Rails application calls
`Bundler::require` at startup (by way of the default project templates).
Because bundler will then, by default, `require` each gem listed in the
Gemfile, Rails applications are almost always written such that none of
the source files explicitly require their dependencies. That leaves us
with two options: support and use Bundler, or maintain massive patches
for every Rails application that we package.
Closes #8612
2015-11-15 02:17:29 +00:00
|
|
|
, ...} @ attrs:
|
|
|
|
|
|
|
|
|
|
let
|
|
|
|
|
src = attrs.src or (
|
2016-01-24 23:27:06 +00:00
|
|
|
if type == "gem" then
|
|
|
|
|
fetchurl {
|
2017-10-05 09:10:57 +01:00
|
|
|
urls = map (
|
|
|
|
|
remote: "${remote}/gems/${gemName}-${version}.gem"
|
|
|
|
|
) (attrs.source.remotes or [ "https://rubygems.org" ]);
|
|
|
|
|
inherit (attrs.source) sha256;
|
2016-01-24 23:27:06 +00:00
|
|
|
}
|
|
|
|
|
else if type == "git" then
|
|
|
|
|
fetchgit {
|
2017-10-05 09:10:57 +01:00
|
|
|
inherit (attrs.source) url rev sha256 fetchSubmodules;
|
2016-01-24 23:27:06 +00:00
|
|
|
}
|
2017-10-30 06:19:35 +00:00
|
|
|
else if type == "url" then
|
|
|
|
|
fetchurl attrs.source
|
2016-01-24 23:27:06 +00:00
|
|
|
else
|
|
|
|
|
throw "buildRubyGem: don't know how to build a gem of type \"${type}\""
|
ruby: new bundler infrastructure
This improves our Bundler integration (i.e. `bundlerEnv`).
Before describing the implementation differences, I'd like to point a
breaking change: buildRubyGem now expects `gemName` and `version` as
arguments, rather than a `name` attribute in the form of
"<gem-name>-<version>".
Now for the differences in implementation.
The previous implementation installed all gems at once in a single
derivation. This was made possible by using a set of monkey-patches to
prevent Bundler from downloading gems impurely, and to help Bundler
find and activate all required gems prior to installation. This had
several downsides:
* The patches were really hard to understand, and required subtle
interaction with the rest of the build environment.
* A single install failure would cause the entire derivation to fail.
The new implementation takes a different approach: we install gems into
separate derivations, and then present Bundler with a symlink forest
thereof. This has a couple benefits over the existing approach:
* Fewer patches are required, with less interplay with the rest of the
build environment.
* Changes to one gem no longer cause a rebuild of the entire dependency
graph.
* Builds take 20% less time (using gitlab as a reference).
It's unfortunate that we still have to muck with Bundler's internals,
though it's unavoidable with the way that Bundler is currently designed.
There are a number improvements that could be made in Bundler that would
simplify our packaging story:
* Bundler requires all installed gems reside within the same prefix
(GEM_HOME), unlike RubyGems which allows for multiple prefixes to
be specified through GEM_PATH. It would be ideal if Bundler allowed
for packages to be installed and sourced from multiple prefixes.
* Bundler installs git sources very differently from how RubyGems
installs gem packages, and, unlike RubyGems, it doesn't provide a
public interface (CLI or programmatic) to guide the installation of a
single gem. We are presented with the options of either
reimplementing a considerable portion Bundler, or patch and use parts
of its internals; I choose the latter. Ideally, there would be a way
to install gems from git sources in a manner similar to how we drive
`gem` to install gem packages.
* When a bundled program is executed (via `bundle exec` or a
binstub that does `require 'bundler/setup'`), the setup process reads
the Gemfile.lock, activates the dependencies, re-serializes the lock
file it read earlier, and then attempts to overwrite the Gemfile.lock
if the contents aren't bit-identical. I think the reasoning is that
by merely running an application with a newer version of Bundler, you'll
automatically keep the Gemfile.lock up-to-date with any changes in the
format. Unfortunately, that doesn't play well with any form of
packaging, because bundler will immediately cause the application to
abort when it attempts to write to the read-only Gemfile.lock in the
store. We work around this by normalizing the Gemfile.lock with the
version of Bundler that we'll use at runtime before we copy it into
the store. This feels fragile, but it's the best we can do without
changes upstream, or resorting to more delicate hacks.
With all of the challenges in using Bundler, one might wonder why we
can't just cut Bundler out of the picture and use RubyGems. After all,
Nix provides most of the isolation that Bundler is used for anyway.
The problem, however, is that almost every Rails application calls
`Bundler::require` at startup (by way of the default project templates).
Because bundler will then, by default, `require` each gem listed in the
Gemfile, Rails applications are almost always written such that none of
the source files explicitly require their dependencies. That leaves us
with two options: support and use Bundler, or maintain massive patches
for every Rails application that we package.
Closes #8612
2015-11-15 02:17:29 +00:00
|
|
|
);
|
|
|
|
|
documentFlag =
|
|
|
|
|
if document == []
|
|
|
|
|
then "-N"
|
|
|
|
|
else "--document ${lib.concatStringsSep "," document}";
|
|
|
|
|
|
|
|
|
|
in
|
|
|
|
|
|
2017-10-05 09:10:57 +01:00
|
|
|
stdenv.mkDerivation ((builtins.removeAttrs attrs ["source"]) // {
|
2016-03-02 10:05:01 +00:00
|
|
|
inherit ruby;
|
ruby: new bundler infrastructure
This improves our Bundler integration (i.e. `bundlerEnv`).
Before describing the implementation differences, I'd like to point a
breaking change: buildRubyGem now expects `gemName` and `version` as
arguments, rather than a `name` attribute in the form of
"<gem-name>-<version>".
Now for the differences in implementation.
The previous implementation installed all gems at once in a single
derivation. This was made possible by using a set of monkey-patches to
prevent Bundler from downloading gems impurely, and to help Bundler
find and activate all required gems prior to installation. This had
several downsides:
* The patches were really hard to understand, and required subtle
interaction with the rest of the build environment.
* A single install failure would cause the entire derivation to fail.
The new implementation takes a different approach: we install gems into
separate derivations, and then present Bundler with a symlink forest
thereof. This has a couple benefits over the existing approach:
* Fewer patches are required, with less interplay with the rest of the
build environment.
* Changes to one gem no longer cause a rebuild of the entire dependency
graph.
* Builds take 20% less time (using gitlab as a reference).
It's unfortunate that we still have to muck with Bundler's internals,
though it's unavoidable with the way that Bundler is currently designed.
There are a number improvements that could be made in Bundler that would
simplify our packaging story:
* Bundler requires all installed gems reside within the same prefix
(GEM_HOME), unlike RubyGems which allows for multiple prefixes to
be specified through GEM_PATH. It would be ideal if Bundler allowed
for packages to be installed and sourced from multiple prefixes.
* Bundler installs git sources very differently from how RubyGems
installs gem packages, and, unlike RubyGems, it doesn't provide a
public interface (CLI or programmatic) to guide the installation of a
single gem. We are presented with the options of either
reimplementing a considerable portion Bundler, or patch and use parts
of its internals; I choose the latter. Ideally, there would be a way
to install gems from git sources in a manner similar to how we drive
`gem` to install gem packages.
* When a bundled program is executed (via `bundle exec` or a
binstub that does `require 'bundler/setup'`), the setup process reads
the Gemfile.lock, activates the dependencies, re-serializes the lock
file it read earlier, and then attempts to overwrite the Gemfile.lock
if the contents aren't bit-identical. I think the reasoning is that
by merely running an application with a newer version of Bundler, you'll
automatically keep the Gemfile.lock up-to-date with any changes in the
format. Unfortunately, that doesn't play well with any form of
packaging, because bundler will immediately cause the application to
abort when it attempts to write to the read-only Gemfile.lock in the
store. We work around this by normalizing the Gemfile.lock with the
version of Bundler that we'll use at runtime before we copy it into
the store. This feels fragile, but it's the best we can do without
changes upstream, or resorting to more delicate hacks.
With all of the challenges in using Bundler, one might wonder why we
can't just cut Bundler out of the picture and use RubyGems. After all,
Nix provides most of the isolation that Bundler is used for anyway.
The problem, however, is that almost every Rails application calls
`Bundler::require` at startup (by way of the default project templates).
Because bundler will then, by default, `require` each gem listed in the
Gemfile, Rails applications are almost always written such that none of
the source files explicitly require their dependencies. That leaves us
with two options: support and use Bundler, or maintain massive patches
for every Rails application that we package.
Closes #8612
2015-11-15 02:17:29 +00:00
|
|
|
inherit dontBuild;
|
|
|
|
|
inherit dontStrip;
|
|
|
|
|
inherit type;
|
|
|
|
|
|
|
|
|
|
buildInputs = [
|
2016-03-02 10:05:01 +00:00
|
|
|
ruby makeWrapper
|
2017-10-30 06:19:35 +00:00
|
|
|
] ++ lib.optionals (type == "git") [ git ]
|
|
|
|
|
++ lib.optionals (type != "gem") [ bundler ]
|
2016-01-24 22:48:26 +00:00
|
|
|
++ lib.optional stdenv.isDarwin darwin.libobjc
|
ruby: new bundler infrastructure
This improves our Bundler integration (i.e. `bundlerEnv`).
Before describing the implementation differences, I'd like to point a
breaking change: buildRubyGem now expects `gemName` and `version` as
arguments, rather than a `name` attribute in the form of
"<gem-name>-<version>".
Now for the differences in implementation.
The previous implementation installed all gems at once in a single
derivation. This was made possible by using a set of monkey-patches to
prevent Bundler from downloading gems impurely, and to help Bundler
find and activate all required gems prior to installation. This had
several downsides:
* The patches were really hard to understand, and required subtle
interaction with the rest of the build environment.
* A single install failure would cause the entire derivation to fail.
The new implementation takes a different approach: we install gems into
separate derivations, and then present Bundler with a symlink forest
thereof. This has a couple benefits over the existing approach:
* Fewer patches are required, with less interplay with the rest of the
build environment.
* Changes to one gem no longer cause a rebuild of the entire dependency
graph.
* Builds take 20% less time (using gitlab as a reference).
It's unfortunate that we still have to muck with Bundler's internals,
though it's unavoidable with the way that Bundler is currently designed.
There are a number improvements that could be made in Bundler that would
simplify our packaging story:
* Bundler requires all installed gems reside within the same prefix
(GEM_HOME), unlike RubyGems which allows for multiple prefixes to
be specified through GEM_PATH. It would be ideal if Bundler allowed
for packages to be installed and sourced from multiple prefixes.
* Bundler installs git sources very differently from how RubyGems
installs gem packages, and, unlike RubyGems, it doesn't provide a
public interface (CLI or programmatic) to guide the installation of a
single gem. We are presented with the options of either
reimplementing a considerable portion Bundler, or patch and use parts
of its internals; I choose the latter. Ideally, there would be a way
to install gems from git sources in a manner similar to how we drive
`gem` to install gem packages.
* When a bundled program is executed (via `bundle exec` or a
binstub that does `require 'bundler/setup'`), the setup process reads
the Gemfile.lock, activates the dependencies, re-serializes the lock
file it read earlier, and then attempts to overwrite the Gemfile.lock
if the contents aren't bit-identical. I think the reasoning is that
by merely running an application with a newer version of Bundler, you'll
automatically keep the Gemfile.lock up-to-date with any changes in the
format. Unfortunately, that doesn't play well with any form of
packaging, because bundler will immediately cause the application to
abort when it attempts to write to the read-only Gemfile.lock in the
store. We work around this by normalizing the Gemfile.lock with the
version of Bundler that we'll use at runtime before we copy it into
the store. This feels fragile, but it's the best we can do without
changes upstream, or resorting to more delicate hacks.
With all of the challenges in using Bundler, one might wonder why we
can't just cut Bundler out of the picture and use RubyGems. After all,
Nix provides most of the isolation that Bundler is used for anyway.
The problem, however, is that almost every Rails application calls
`Bundler::require` at startup (by way of the default project templates).
Because bundler will then, by default, `require` each gem listed in the
Gemfile, Rails applications are almost always written such that none of
the source files explicitly require their dependencies. That leaves us
with two options: support and use Bundler, or maintain massive patches
for every Rails application that we package.
Closes #8612
2015-11-15 02:17:29 +00:00
|
|
|
++ buildInputs;
|
|
|
|
|
|
2017-05-09 17:39:20 +01:00
|
|
|
#name = builtins.trace (attrs.name or "no attr.name" ) "${namePrefix}${gemName}-${version}";
|
2016-02-07 15:40:43 +00:00
|
|
|
name = attrs.name or "${namePrefix}${gemName}-${version}";
|
ruby: new bundler infrastructure
This improves our Bundler integration (i.e. `bundlerEnv`).
Before describing the implementation differences, I'd like to point a
breaking change: buildRubyGem now expects `gemName` and `version` as
arguments, rather than a `name` attribute in the form of
"<gem-name>-<version>".
Now for the differences in implementation.
The previous implementation installed all gems at once in a single
derivation. This was made possible by using a set of monkey-patches to
prevent Bundler from downloading gems impurely, and to help Bundler
find and activate all required gems prior to installation. This had
several downsides:
* The patches were really hard to understand, and required subtle
interaction with the rest of the build environment.
* A single install failure would cause the entire derivation to fail.
The new implementation takes a different approach: we install gems into
separate derivations, and then present Bundler with a symlink forest
thereof. This has a couple benefits over the existing approach:
* Fewer patches are required, with less interplay with the rest of the
build environment.
* Changes to one gem no longer cause a rebuild of the entire dependency
graph.
* Builds take 20% less time (using gitlab as a reference).
It's unfortunate that we still have to muck with Bundler's internals,
though it's unavoidable with the way that Bundler is currently designed.
There are a number improvements that could be made in Bundler that would
simplify our packaging story:
* Bundler requires all installed gems reside within the same prefix
(GEM_HOME), unlike RubyGems which allows for multiple prefixes to
be specified through GEM_PATH. It would be ideal if Bundler allowed
for packages to be installed and sourced from multiple prefixes.
* Bundler installs git sources very differently from how RubyGems
installs gem packages, and, unlike RubyGems, it doesn't provide a
public interface (CLI or programmatic) to guide the installation of a
single gem. We are presented with the options of either
reimplementing a considerable portion Bundler, or patch and use parts
of its internals; I choose the latter. Ideally, there would be a way
to install gems from git sources in a manner similar to how we drive
`gem` to install gem packages.
* When a bundled program is executed (via `bundle exec` or a
binstub that does `require 'bundler/setup'`), the setup process reads
the Gemfile.lock, activates the dependencies, re-serializes the lock
file it read earlier, and then attempts to overwrite the Gemfile.lock
if the contents aren't bit-identical. I think the reasoning is that
by merely running an application with a newer version of Bundler, you'll
automatically keep the Gemfile.lock up-to-date with any changes in the
format. Unfortunately, that doesn't play well with any form of
packaging, because bundler will immediately cause the application to
abort when it attempts to write to the read-only Gemfile.lock in the
store. We work around this by normalizing the Gemfile.lock with the
version of Bundler that we'll use at runtime before we copy it into
the store. This feels fragile, but it's the best we can do without
changes upstream, or resorting to more delicate hacks.
With all of the challenges in using Bundler, one might wonder why we
can't just cut Bundler out of the picture and use RubyGems. After all,
Nix provides most of the isolation that Bundler is used for anyway.
The problem, however, is that almost every Rails application calls
`Bundler::require` at startup (by way of the default project templates).
Because bundler will then, by default, `require` each gem listed in the
Gemfile, Rails applications are almost always written such that none of
the source files explicitly require their dependencies. That leaves us
with two options: support and use Bundler, or maintain massive patches
for every Rails application that we package.
Closes #8612
2015-11-15 02:17:29 +00:00
|
|
|
|
|
|
|
|
inherit src;
|
|
|
|
|
|
2019-03-29 13:36:04 +00:00
|
|
|
|
ruby: new bundler infrastructure
This improves our Bundler integration (i.e. `bundlerEnv`).
Before describing the implementation differences, I'd like to point a
breaking change: buildRubyGem now expects `gemName` and `version` as
arguments, rather than a `name` attribute in the form of
"<gem-name>-<version>".
Now for the differences in implementation.
The previous implementation installed all gems at once in a single
derivation. This was made possible by using a set of monkey-patches to
prevent Bundler from downloading gems impurely, and to help Bundler
find and activate all required gems prior to installation. This had
several downsides:
* The patches were really hard to understand, and required subtle
interaction with the rest of the build environment.
* A single install failure would cause the entire derivation to fail.
The new implementation takes a different approach: we install gems into
separate derivations, and then present Bundler with a symlink forest
thereof. This has a couple benefits over the existing approach:
* Fewer patches are required, with less interplay with the rest of the
build environment.
* Changes to one gem no longer cause a rebuild of the entire dependency
graph.
* Builds take 20% less time (using gitlab as a reference).
It's unfortunate that we still have to muck with Bundler's internals,
though it's unavoidable with the way that Bundler is currently designed.
There are a number improvements that could be made in Bundler that would
simplify our packaging story:
* Bundler requires all installed gems reside within the same prefix
(GEM_HOME), unlike RubyGems which allows for multiple prefixes to
be specified through GEM_PATH. It would be ideal if Bundler allowed
for packages to be installed and sourced from multiple prefixes.
* Bundler installs git sources very differently from how RubyGems
installs gem packages, and, unlike RubyGems, it doesn't provide a
public interface (CLI or programmatic) to guide the installation of a
single gem. We are presented with the options of either
reimplementing a considerable portion Bundler, or patch and use parts
of its internals; I choose the latter. Ideally, there would be a way
to install gems from git sources in a manner similar to how we drive
`gem` to install gem packages.
* When a bundled program is executed (via `bundle exec` or a
binstub that does `require 'bundler/setup'`), the setup process reads
the Gemfile.lock, activates the dependencies, re-serializes the lock
file it read earlier, and then attempts to overwrite the Gemfile.lock
if the contents aren't bit-identical. I think the reasoning is that
by merely running an application with a newer version of Bundler, you'll
automatically keep the Gemfile.lock up-to-date with any changes in the
format. Unfortunately, that doesn't play well with any form of
packaging, because bundler will immediately cause the application to
abort when it attempts to write to the read-only Gemfile.lock in the
store. We work around this by normalizing the Gemfile.lock with the
version of Bundler that we'll use at runtime before we copy it into
the store. This feels fragile, but it's the best we can do without
changes upstream, or resorting to more delicate hacks.
With all of the challenges in using Bundler, one might wonder why we
can't just cut Bundler out of the picture and use RubyGems. After all,
Nix provides most of the isolation that Bundler is used for anyway.
The problem, however, is that almost every Rails application calls
`Bundler::require` at startup (by way of the default project templates).
Because bundler will then, by default, `require` each gem listed in the
Gemfile, Rails applications are almost always written such that none of
the source files explicitly require their dependencies. That leaves us
with two options: support and use Bundler, or maintain massive patches
for every Rails application that we package.
Closes #8612
2015-11-15 02:17:29 +00:00
|
|
|
unpackPhase = attrs.unpackPhase or ''
|
|
|
|
|
runHook preUnpack
|
|
|
|
|
|
|
|
|
|
if [[ -f $src && $src == *.gem ]]; then
|
2019-10-31 16:50:15 +00:00
|
|
|
if [[ -z "''${dontBuild-}" ]]; then
|
ruby: new bundler infrastructure
This improves our Bundler integration (i.e. `bundlerEnv`).
Before describing the implementation differences, I'd like to point a
breaking change: buildRubyGem now expects `gemName` and `version` as
arguments, rather than a `name` attribute in the form of
"<gem-name>-<version>".
Now for the differences in implementation.
The previous implementation installed all gems at once in a single
derivation. This was made possible by using a set of monkey-patches to
prevent Bundler from downloading gems impurely, and to help Bundler
find and activate all required gems prior to installation. This had
several downsides:
* The patches were really hard to understand, and required subtle
interaction with the rest of the build environment.
* A single install failure would cause the entire derivation to fail.
The new implementation takes a different approach: we install gems into
separate derivations, and then present Bundler with a symlink forest
thereof. This has a couple benefits over the existing approach:
* Fewer patches are required, with less interplay with the rest of the
build environment.
* Changes to one gem no longer cause a rebuild of the entire dependency
graph.
* Builds take 20% less time (using gitlab as a reference).
It's unfortunate that we still have to muck with Bundler's internals,
though it's unavoidable with the way that Bundler is currently designed.
There are a number improvements that could be made in Bundler that would
simplify our packaging story:
* Bundler requires all installed gems reside within the same prefix
(GEM_HOME), unlike RubyGems which allows for multiple prefixes to
be specified through GEM_PATH. It would be ideal if Bundler allowed
for packages to be installed and sourced from multiple prefixes.
* Bundler installs git sources very differently from how RubyGems
installs gem packages, and, unlike RubyGems, it doesn't provide a
public interface (CLI or programmatic) to guide the installation of a
single gem. We are presented with the options of either
reimplementing a considerable portion Bundler, or patch and use parts
of its internals; I choose the latter. Ideally, there would be a way
to install gems from git sources in a manner similar to how we drive
`gem` to install gem packages.
* When a bundled program is executed (via `bundle exec` or a
binstub that does `require 'bundler/setup'`), the setup process reads
the Gemfile.lock, activates the dependencies, re-serializes the lock
file it read earlier, and then attempts to overwrite the Gemfile.lock
if the contents aren't bit-identical. I think the reasoning is that
by merely running an application with a newer version of Bundler, you'll
automatically keep the Gemfile.lock up-to-date with any changes in the
format. Unfortunately, that doesn't play well with any form of
packaging, because bundler will immediately cause the application to
abort when it attempts to write to the read-only Gemfile.lock in the
store. We work around this by normalizing the Gemfile.lock with the
version of Bundler that we'll use at runtime before we copy it into
the store. This feels fragile, but it's the best we can do without
changes upstream, or resorting to more delicate hacks.
With all of the challenges in using Bundler, one might wonder why we
can't just cut Bundler out of the picture and use RubyGems. After all,
Nix provides most of the isolation that Bundler is used for anyway.
The problem, however, is that almost every Rails application calls
`Bundler::require` at startup (by way of the default project templates).
Because bundler will then, by default, `require` each gem listed in the
Gemfile, Rails applications are almost always written such that none of
the source files explicitly require their dependencies. That leaves us
with two options: support and use Bundler, or maintain massive patches
for every Rails application that we package.
Closes #8612
2015-11-15 02:17:29 +00:00
|
|
|
# we won't know the name of the directory that RubyGems creates,
|
|
|
|
|
# so we'll just use a glob to find it and move it over.
|
|
|
|
|
gempkg="$src"
|
|
|
|
|
sourceRoot=source
|
|
|
|
|
gem unpack $gempkg --target=container
|
|
|
|
|
cp -r container/* $sourceRoot
|
|
|
|
|
rm -r container
|
|
|
|
|
|
|
|
|
|
# copy out the original gemspec, for convenience during patching /
|
|
|
|
|
# overrides.
|
|
|
|
|
gem specification $gempkg --ruby > original.gemspec
|
|
|
|
|
gemspec=$(readlink -f .)/original.gemspec
|
|
|
|
|
else
|
|
|
|
|
gempkg="$src"
|
|
|
|
|
fi
|
|
|
|
|
else
|
|
|
|
|
# Fall back to the original thing for everything else.
|
|
|
|
|
dontBuild=""
|
|
|
|
|
preUnpack="" postUnpack="" unpackPhase
|
|
|
|
|
fi
|
|
|
|
|
|
|
|
|
|
runHook postUnpack
|
|
|
|
|
'';
|
|
|
|
|
|
2021-02-22 04:20:00 +00:00
|
|
|
# As of ruby 3.0, ruby headers require -fdeclspec when building with clang
|
|
|
|
|
# Introduced in https://github.com/ruby/ruby/commit/0958e19ffb047781fe1506760c7cbd8d7fe74e57
|
|
|
|
|
NIX_CFLAGS_COMPILE = lib.optionals (stdenv.cc.isClang && lib.versionAtLeast ruby.version.major "3") [
|
|
|
|
|
"-fdeclspec"
|
|
|
|
|
];
|
|
|
|
|
|
ruby: new bundler infrastructure
This improves our Bundler integration (i.e. `bundlerEnv`).
Before describing the implementation differences, I'd like to point a
breaking change: buildRubyGem now expects `gemName` and `version` as
arguments, rather than a `name` attribute in the form of
"<gem-name>-<version>".
Now for the differences in implementation.
The previous implementation installed all gems at once in a single
derivation. This was made possible by using a set of monkey-patches to
prevent Bundler from downloading gems impurely, and to help Bundler
find and activate all required gems prior to installation. This had
several downsides:
* The patches were really hard to understand, and required subtle
interaction with the rest of the build environment.
* A single install failure would cause the entire derivation to fail.
The new implementation takes a different approach: we install gems into
separate derivations, and then present Bundler with a symlink forest
thereof. This has a couple benefits over the existing approach:
* Fewer patches are required, with less interplay with the rest of the
build environment.
* Changes to one gem no longer cause a rebuild of the entire dependency
graph.
* Builds take 20% less time (using gitlab as a reference).
It's unfortunate that we still have to muck with Bundler's internals,
though it's unavoidable with the way that Bundler is currently designed.
There are a number improvements that could be made in Bundler that would
simplify our packaging story:
* Bundler requires all installed gems reside within the same prefix
(GEM_HOME), unlike RubyGems which allows for multiple prefixes to
be specified through GEM_PATH. It would be ideal if Bundler allowed
for packages to be installed and sourced from multiple prefixes.
* Bundler installs git sources very differently from how RubyGems
installs gem packages, and, unlike RubyGems, it doesn't provide a
public interface (CLI or programmatic) to guide the installation of a
single gem. We are presented with the options of either
reimplementing a considerable portion Bundler, or patch and use parts
of its internals; I choose the latter. Ideally, there would be a way
to install gems from git sources in a manner similar to how we drive
`gem` to install gem packages.
* When a bundled program is executed (via `bundle exec` or a
binstub that does `require 'bundler/setup'`), the setup process reads
the Gemfile.lock, activates the dependencies, re-serializes the lock
file it read earlier, and then attempts to overwrite the Gemfile.lock
if the contents aren't bit-identical. I think the reasoning is that
by merely running an application with a newer version of Bundler, you'll
automatically keep the Gemfile.lock up-to-date with any changes in the
format. Unfortunately, that doesn't play well with any form of
packaging, because bundler will immediately cause the application to
abort when it attempts to write to the read-only Gemfile.lock in the
store. We work around this by normalizing the Gemfile.lock with the
version of Bundler that we'll use at runtime before we copy it into
the store. This feels fragile, but it's the best we can do without
changes upstream, or resorting to more delicate hacks.
With all of the challenges in using Bundler, one might wonder why we
can't just cut Bundler out of the picture and use RubyGems. After all,
Nix provides most of the isolation that Bundler is used for anyway.
The problem, however, is that almost every Rails application calls
`Bundler::require` at startup (by way of the default project templates).
Because bundler will then, by default, `require` each gem listed in the
Gemfile, Rails applications are almost always written such that none of
the source files explicitly require their dependencies. That leaves us
with two options: support and use Bundler, or maintain massive patches
for every Rails application that we package.
Closes #8612
2015-11-15 02:17:29 +00:00
|
|
|
buildPhase = attrs.buildPhase or ''
|
|
|
|
|
runHook preBuild
|
|
|
|
|
|
|
|
|
|
if [[ "$type" == "gem" ]]; then
|
|
|
|
|
if [[ -z "$gemspec" ]]; then
|
|
|
|
|
gemspec="$(find . -name '*.gemspec')"
|
|
|
|
|
echo "found the following gemspecs:"
|
|
|
|
|
echo "$gemspec"
|
|
|
|
|
gemspec="$(echo "$gemspec" | head -n1)"
|
|
|
|
|
fi
|
|
|
|
|
|
|
|
|
|
exec 3>&1
|
|
|
|
|
output="$(gem build $gemspec | tee >(cat - >&3))"
|
|
|
|
|
exec 3>&-
|
|
|
|
|
|
|
|
|
|
gempkg=$(echo "$output" | grep -oP 'File: \K(.*)')
|
|
|
|
|
|
|
|
|
|
echo "gem package built: $gempkg"
|
2019-03-29 13:36:04 +00:00
|
|
|
elif [[ "$type" == "git" ]]; then
|
|
|
|
|
git init
|
|
|
|
|
# remove variations to improve the likelihood of a bit-reproducible output
|
|
|
|
|
rm -rf .git/logs/ .git/hooks/ .git/index .git/FETCH_HEAD .git/ORIG_HEAD .git/refs/remotes/origin/HEAD .git/config
|
|
|
|
|
# support `git ls-files`
|
|
|
|
|
git add .
|
ruby: new bundler infrastructure
This improves our Bundler integration (i.e. `bundlerEnv`).
Before describing the implementation differences, I'd like to point a
breaking change: buildRubyGem now expects `gemName` and `version` as
arguments, rather than a `name` attribute in the form of
"<gem-name>-<version>".
Now for the differences in implementation.
The previous implementation installed all gems at once in a single
derivation. This was made possible by using a set of monkey-patches to
prevent Bundler from downloading gems impurely, and to help Bundler
find and activate all required gems prior to installation. This had
several downsides:
* The patches were really hard to understand, and required subtle
interaction with the rest of the build environment.
* A single install failure would cause the entire derivation to fail.
The new implementation takes a different approach: we install gems into
separate derivations, and then present Bundler with a symlink forest
thereof. This has a couple benefits over the existing approach:
* Fewer patches are required, with less interplay with the rest of the
build environment.
* Changes to one gem no longer cause a rebuild of the entire dependency
graph.
* Builds take 20% less time (using gitlab as a reference).
It's unfortunate that we still have to muck with Bundler's internals,
though it's unavoidable with the way that Bundler is currently designed.
There are a number improvements that could be made in Bundler that would
simplify our packaging story:
* Bundler requires all installed gems reside within the same prefix
(GEM_HOME), unlike RubyGems which allows for multiple prefixes to
be specified through GEM_PATH. It would be ideal if Bundler allowed
for packages to be installed and sourced from multiple prefixes.
* Bundler installs git sources very differently from how RubyGems
installs gem packages, and, unlike RubyGems, it doesn't provide a
public interface (CLI or programmatic) to guide the installation of a
single gem. We are presented with the options of either
reimplementing a considerable portion Bundler, or patch and use parts
of its internals; I choose the latter. Ideally, there would be a way
to install gems from git sources in a manner similar to how we drive
`gem` to install gem packages.
* When a bundled program is executed (via `bundle exec` or a
binstub that does `require 'bundler/setup'`), the setup process reads
the Gemfile.lock, activates the dependencies, re-serializes the lock
file it read earlier, and then attempts to overwrite the Gemfile.lock
if the contents aren't bit-identical. I think the reasoning is that
by merely running an application with a newer version of Bundler, you'll
automatically keep the Gemfile.lock up-to-date with any changes in the
format. Unfortunately, that doesn't play well with any form of
packaging, because bundler will immediately cause the application to
abort when it attempts to write to the read-only Gemfile.lock in the
store. We work around this by normalizing the Gemfile.lock with the
version of Bundler that we'll use at runtime before we copy it into
the store. This feels fragile, but it's the best we can do without
changes upstream, or resorting to more delicate hacks.
With all of the challenges in using Bundler, one might wonder why we
can't just cut Bundler out of the picture and use RubyGems. After all,
Nix provides most of the isolation that Bundler is used for anyway.
The problem, however, is that almost every Rails application calls
`Bundler::require` at startup (by way of the default project templates).
Because bundler will then, by default, `require` each gem listed in the
Gemfile, Rails applications are almost always written such that none of
the source files explicitly require their dependencies. That leaves us
with two options: support and use Bundler, or maintain massive patches
for every Rails application that we package.
Closes #8612
2015-11-15 02:17:29 +00:00
|
|
|
fi
|
|
|
|
|
|
|
|
|
|
runHook postBuild
|
|
|
|
|
'';
|
|
|
|
|
|
|
|
|
|
# Note:
|
|
|
|
|
# We really do need to keep the $out/${ruby.gemPath}/cache.
|
|
|
|
|
# This is very important in order for many parts of RubyGems/Bundler to not blow up.
|
|
|
|
|
# See https://github.com/bundler/bundler/issues/3327
|
|
|
|
|
installPhase = attrs.installPhase or ''
|
|
|
|
|
runHook preInstall
|
|
|
|
|
|
|
|
|
|
export GEM_HOME=$out/${ruby.gemPath}
|
|
|
|
|
mkdir -p $GEM_HOME
|
|
|
|
|
|
|
|
|
|
echo "buildFlags: $buildFlags"
|
|
|
|
|
|
2017-10-30 06:19:35 +00:00
|
|
|
${lib.optionalString (type == "url") ''
|
|
|
|
|
ruby ${./nix-bundle-install.rb} \
|
|
|
|
|
"path" \
|
|
|
|
|
'${gemName}' \
|
|
|
|
|
'${version}' \
|
|
|
|
|
'${lib.escapeShellArgs buildFlags}'
|
|
|
|
|
''}
|
ruby: new bundler infrastructure
This improves our Bundler integration (i.e. `bundlerEnv`).
Before describing the implementation differences, I'd like to point a
breaking change: buildRubyGem now expects `gemName` and `version` as
arguments, rather than a `name` attribute in the form of
"<gem-name>-<version>".
Now for the differences in implementation.
The previous implementation installed all gems at once in a single
derivation. This was made possible by using a set of monkey-patches to
prevent Bundler from downloading gems impurely, and to help Bundler
find and activate all required gems prior to installation. This had
several downsides:
* The patches were really hard to understand, and required subtle
interaction with the rest of the build environment.
* A single install failure would cause the entire derivation to fail.
The new implementation takes a different approach: we install gems into
separate derivations, and then present Bundler with a symlink forest
thereof. This has a couple benefits over the existing approach:
* Fewer patches are required, with less interplay with the rest of the
build environment.
* Changes to one gem no longer cause a rebuild of the entire dependency
graph.
* Builds take 20% less time (using gitlab as a reference).
It's unfortunate that we still have to muck with Bundler's internals,
though it's unavoidable with the way that Bundler is currently designed.
There are a number improvements that could be made in Bundler that would
simplify our packaging story:
* Bundler requires all installed gems reside within the same prefix
(GEM_HOME), unlike RubyGems which allows for multiple prefixes to
be specified through GEM_PATH. It would be ideal if Bundler allowed
for packages to be installed and sourced from multiple prefixes.
* Bundler installs git sources very differently from how RubyGems
installs gem packages, and, unlike RubyGems, it doesn't provide a
public interface (CLI or programmatic) to guide the installation of a
single gem. We are presented with the options of either
reimplementing a considerable portion Bundler, or patch and use parts
of its internals; I choose the latter. Ideally, there would be a way
to install gems from git sources in a manner similar to how we drive
`gem` to install gem packages.
* When a bundled program is executed (via `bundle exec` or a
binstub that does `require 'bundler/setup'`), the setup process reads
the Gemfile.lock, activates the dependencies, re-serializes the lock
file it read earlier, and then attempts to overwrite the Gemfile.lock
if the contents aren't bit-identical. I think the reasoning is that
by merely running an application with a newer version of Bundler, you'll
automatically keep the Gemfile.lock up-to-date with any changes in the
format. Unfortunately, that doesn't play well with any form of
packaging, because bundler will immediately cause the application to
abort when it attempts to write to the read-only Gemfile.lock in the
store. We work around this by normalizing the Gemfile.lock with the
version of Bundler that we'll use at runtime before we copy it into
the store. This feels fragile, but it's the best we can do without
changes upstream, or resorting to more delicate hacks.
With all of the challenges in using Bundler, one might wonder why we
can't just cut Bundler out of the picture and use RubyGems. After all,
Nix provides most of the isolation that Bundler is used for anyway.
The problem, however, is that almost every Rails application calls
`Bundler::require` at startup (by way of the default project templates).
Because bundler will then, by default, `require` each gem listed in the
Gemfile, Rails applications are almost always written such that none of
the source files explicitly require their dependencies. That leaves us
with two options: support and use Bundler, or maintain massive patches
for every Rails application that we package.
Closes #8612
2015-11-15 02:17:29 +00:00
|
|
|
${lib.optionalString (type == "git") ''
|
|
|
|
|
ruby ${./nix-bundle-install.rb} \
|
2017-10-30 06:19:35 +00:00
|
|
|
"git" \
|
|
|
|
|
'${gemName}' \
|
|
|
|
|
'${version}' \
|
|
|
|
|
'${lib.escapeShellArgs buildFlags}' \
|
|
|
|
|
'${attrs.source.url}' \
|
2019-04-02 15:47:36 +01:00
|
|
|
'.' \
|
2017-10-30 06:19:35 +00:00
|
|
|
'${attrs.source.rev}'
|
ruby: new bundler infrastructure
This improves our Bundler integration (i.e. `bundlerEnv`).
Before describing the implementation differences, I'd like to point a
breaking change: buildRubyGem now expects `gemName` and `version` as
arguments, rather than a `name` attribute in the form of
"<gem-name>-<version>".
Now for the differences in implementation.
The previous implementation installed all gems at once in a single
derivation. This was made possible by using a set of monkey-patches to
prevent Bundler from downloading gems impurely, and to help Bundler
find and activate all required gems prior to installation. This had
several downsides:
* The patches were really hard to understand, and required subtle
interaction with the rest of the build environment.
* A single install failure would cause the entire derivation to fail.
The new implementation takes a different approach: we install gems into
separate derivations, and then present Bundler with a symlink forest
thereof. This has a couple benefits over the existing approach:
* Fewer patches are required, with less interplay with the rest of the
build environment.
* Changes to one gem no longer cause a rebuild of the entire dependency
graph.
* Builds take 20% less time (using gitlab as a reference).
It's unfortunate that we still have to muck with Bundler's internals,
though it's unavoidable with the way that Bundler is currently designed.
There are a number improvements that could be made in Bundler that would
simplify our packaging story:
* Bundler requires all installed gems reside within the same prefix
(GEM_HOME), unlike RubyGems which allows for multiple prefixes to
be specified through GEM_PATH. It would be ideal if Bundler allowed
for packages to be installed and sourced from multiple prefixes.
* Bundler installs git sources very differently from how RubyGems
installs gem packages, and, unlike RubyGems, it doesn't provide a
public interface (CLI or programmatic) to guide the installation of a
single gem. We are presented with the options of either
reimplementing a considerable portion Bundler, or patch and use parts
of its internals; I choose the latter. Ideally, there would be a way
to install gems from git sources in a manner similar to how we drive
`gem` to install gem packages.
* When a bundled program is executed (via `bundle exec` or a
binstub that does `require 'bundler/setup'`), the setup process reads
the Gemfile.lock, activates the dependencies, re-serializes the lock
file it read earlier, and then attempts to overwrite the Gemfile.lock
if the contents aren't bit-identical. I think the reasoning is that
by merely running an application with a newer version of Bundler, you'll
automatically keep the Gemfile.lock up-to-date with any changes in the
format. Unfortunately, that doesn't play well with any form of
packaging, because bundler will immediately cause the application to
abort when it attempts to write to the read-only Gemfile.lock in the
store. We work around this by normalizing the Gemfile.lock with the
version of Bundler that we'll use at runtime before we copy it into
the store. This feels fragile, but it's the best we can do without
changes upstream, or resorting to more delicate hacks.
With all of the challenges in using Bundler, one might wonder why we
can't just cut Bundler out of the picture and use RubyGems. After all,
Nix provides most of the isolation that Bundler is used for anyway.
The problem, however, is that almost every Rails application calls
`Bundler::require` at startup (by way of the default project templates).
Because bundler will then, by default, `require` each gem listed in the
Gemfile, Rails applications are almost always written such that none of
the source files explicitly require their dependencies. That leaves us
with two options: support and use Bundler, or maintain massive patches
for every Rails application that we package.
Closes #8612
2015-11-15 02:17:29 +00:00
|
|
|
''}
|
|
|
|
|
|
|
|
|
|
${lib.optionalString (type == "gem") ''
|
|
|
|
|
if [[ -z "$gempkg" ]]; then
|
|
|
|
|
echo "failure: \$gempkg path unspecified" 1>&2
|
|
|
|
|
exit 1
|
|
|
|
|
elif [[ ! -f "$gempkg" ]]; then
|
|
|
|
|
echo "failure: \$gempkg path invalid" 1>&2
|
|
|
|
|
exit 1
|
|
|
|
|
fi
|
|
|
|
|
|
|
|
|
|
gem install \
|
|
|
|
|
--local \
|
|
|
|
|
--force \
|
|
|
|
|
--http-proxy 'http://nodtd.invalid' \
|
|
|
|
|
--ignore-dependencies \
|
2016-08-29 22:12:44 +01:00
|
|
|
--install-dir "$GEM_HOME" \
|
ruby: new bundler infrastructure
This improves our Bundler integration (i.e. `bundlerEnv`).
Before describing the implementation differences, I'd like to point a
breaking change: buildRubyGem now expects `gemName` and `version` as
arguments, rather than a `name` attribute in the form of
"<gem-name>-<version>".
Now for the differences in implementation.
The previous implementation installed all gems at once in a single
derivation. This was made possible by using a set of monkey-patches to
prevent Bundler from downloading gems impurely, and to help Bundler
find and activate all required gems prior to installation. This had
several downsides:
* The patches were really hard to understand, and required subtle
interaction with the rest of the build environment.
* A single install failure would cause the entire derivation to fail.
The new implementation takes a different approach: we install gems into
separate derivations, and then present Bundler with a symlink forest
thereof. This has a couple benefits over the existing approach:
* Fewer patches are required, with less interplay with the rest of the
build environment.
* Changes to one gem no longer cause a rebuild of the entire dependency
graph.
* Builds take 20% less time (using gitlab as a reference).
It's unfortunate that we still have to muck with Bundler's internals,
though it's unavoidable with the way that Bundler is currently designed.
There are a number improvements that could be made in Bundler that would
simplify our packaging story:
* Bundler requires all installed gems reside within the same prefix
(GEM_HOME), unlike RubyGems which allows for multiple prefixes to
be specified through GEM_PATH. It would be ideal if Bundler allowed
for packages to be installed and sourced from multiple prefixes.
* Bundler installs git sources very differently from how RubyGems
installs gem packages, and, unlike RubyGems, it doesn't provide a
public interface (CLI or programmatic) to guide the installation of a
single gem. We are presented with the options of either
reimplementing a considerable portion Bundler, or patch and use parts
of its internals; I choose the latter. Ideally, there would be a way
to install gems from git sources in a manner similar to how we drive
`gem` to install gem packages.
* When a bundled program is executed (via `bundle exec` or a
binstub that does `require 'bundler/setup'`), the setup process reads
the Gemfile.lock, activates the dependencies, re-serializes the lock
file it read earlier, and then attempts to overwrite the Gemfile.lock
if the contents aren't bit-identical. I think the reasoning is that
by merely running an application with a newer version of Bundler, you'll
automatically keep the Gemfile.lock up-to-date with any changes in the
format. Unfortunately, that doesn't play well with any form of
packaging, because bundler will immediately cause the application to
abort when it attempts to write to the read-only Gemfile.lock in the
store. We work around this by normalizing the Gemfile.lock with the
version of Bundler that we'll use at runtime before we copy it into
the store. This feels fragile, but it's the best we can do without
changes upstream, or resorting to more delicate hacks.
With all of the challenges in using Bundler, one might wonder why we
can't just cut Bundler out of the picture and use RubyGems. After all,
Nix provides most of the isolation that Bundler is used for anyway.
The problem, however, is that almost every Rails application calls
`Bundler::require` at startup (by way of the default project templates).
Because bundler will then, by default, `require` each gem listed in the
Gemfile, Rails applications are almost always written such that none of
the source files explicitly require their dependencies. That leaves us
with two options: support and use Bundler, or maintain massive patches
for every Rails application that we package.
Closes #8612
2015-11-15 02:17:29 +00:00
|
|
|
--build-root '/' \
|
|
|
|
|
--backtrace \
|
2016-09-20 17:41:16 +01:00
|
|
|
--no-env-shebang \
|
ruby: new bundler infrastructure
This improves our Bundler integration (i.e. `bundlerEnv`).
Before describing the implementation differences, I'd like to point a
breaking change: buildRubyGem now expects `gemName` and `version` as
arguments, rather than a `name` attribute in the form of
"<gem-name>-<version>".
Now for the differences in implementation.
The previous implementation installed all gems at once in a single
derivation. This was made possible by using a set of monkey-patches to
prevent Bundler from downloading gems impurely, and to help Bundler
find and activate all required gems prior to installation. This had
several downsides:
* The patches were really hard to understand, and required subtle
interaction with the rest of the build environment.
* A single install failure would cause the entire derivation to fail.
The new implementation takes a different approach: we install gems into
separate derivations, and then present Bundler with a symlink forest
thereof. This has a couple benefits over the existing approach:
* Fewer patches are required, with less interplay with the rest of the
build environment.
* Changes to one gem no longer cause a rebuild of the entire dependency
graph.
* Builds take 20% less time (using gitlab as a reference).
It's unfortunate that we still have to muck with Bundler's internals,
though it's unavoidable with the way that Bundler is currently designed.
There are a number improvements that could be made in Bundler that would
simplify our packaging story:
* Bundler requires all installed gems reside within the same prefix
(GEM_HOME), unlike RubyGems which allows for multiple prefixes to
be specified through GEM_PATH. It would be ideal if Bundler allowed
for packages to be installed and sourced from multiple prefixes.
* Bundler installs git sources very differently from how RubyGems
installs gem packages, and, unlike RubyGems, it doesn't provide a
public interface (CLI or programmatic) to guide the installation of a
single gem. We are presented with the options of either
reimplementing a considerable portion Bundler, or patch and use parts
of its internals; I choose the latter. Ideally, there would be a way
to install gems from git sources in a manner similar to how we drive
`gem` to install gem packages.
* When a bundled program is executed (via `bundle exec` or a
binstub that does `require 'bundler/setup'`), the setup process reads
the Gemfile.lock, activates the dependencies, re-serializes the lock
file it read earlier, and then attempts to overwrite the Gemfile.lock
if the contents aren't bit-identical. I think the reasoning is that
by merely running an application with a newer version of Bundler, you'll
automatically keep the Gemfile.lock up-to-date with any changes in the
format. Unfortunately, that doesn't play well with any form of
packaging, because bundler will immediately cause the application to
abort when it attempts to write to the read-only Gemfile.lock in the
store. We work around this by normalizing the Gemfile.lock with the
version of Bundler that we'll use at runtime before we copy it into
the store. This feels fragile, but it's the best we can do without
changes upstream, or resorting to more delicate hacks.
With all of the challenges in using Bundler, one might wonder why we
can't just cut Bundler out of the picture and use RubyGems. After all,
Nix provides most of the isolation that Bundler is used for anyway.
The problem, however, is that almost every Rails application calls
`Bundler::require` at startup (by way of the default project templates).
Because bundler will then, by default, `require` each gem listed in the
Gemfile, Rails applications are almost always written such that none of
the source files explicitly require their dependencies. That leaves us
with two options: support and use Bundler, or maintain massive patches
for every Rails application that we package.
Closes #8612
2015-11-15 02:17:29 +00:00
|
|
|
${documentFlag} \
|
|
|
|
|
$gempkg $gemFlags -- $buildFlags
|
|
|
|
|
|
|
|
|
|
# looks like useless files which break build repeatability and consume space
|
2020-01-06 22:56:16 +00:00
|
|
|
pushd $out/${ruby.gemPath}
|
|
|
|
|
rm -fv doc/*/*/created.rid || true
|
2020-10-25 15:58:05 +00:00
|
|
|
rm -fv {gems/*/ext/*,extensions/*/*/*}/{Makefile,mkmf.log,gem_make.out} || true
|
2020-11-30 11:15:12 +00:00
|
|
|
${if keepGemCache then "" else "rm -fvr cache"}
|
2020-01-06 22:56:16 +00:00
|
|
|
popd
|
ruby: new bundler infrastructure
This improves our Bundler integration (i.e. `bundlerEnv`).
Before describing the implementation differences, I'd like to point a
breaking change: buildRubyGem now expects `gemName` and `version` as
arguments, rather than a `name` attribute in the form of
"<gem-name>-<version>".
Now for the differences in implementation.
The previous implementation installed all gems at once in a single
derivation. This was made possible by using a set of monkey-patches to
prevent Bundler from downloading gems impurely, and to help Bundler
find and activate all required gems prior to installation. This had
several downsides:
* The patches were really hard to understand, and required subtle
interaction with the rest of the build environment.
* A single install failure would cause the entire derivation to fail.
The new implementation takes a different approach: we install gems into
separate derivations, and then present Bundler with a symlink forest
thereof. This has a couple benefits over the existing approach:
* Fewer patches are required, with less interplay with the rest of the
build environment.
* Changes to one gem no longer cause a rebuild of the entire dependency
graph.
* Builds take 20% less time (using gitlab as a reference).
It's unfortunate that we still have to muck with Bundler's internals,
though it's unavoidable with the way that Bundler is currently designed.
There are a number improvements that could be made in Bundler that would
simplify our packaging story:
* Bundler requires all installed gems reside within the same prefix
(GEM_HOME), unlike RubyGems which allows for multiple prefixes to
be specified through GEM_PATH. It would be ideal if Bundler allowed
for packages to be installed and sourced from multiple prefixes.
* Bundler installs git sources very differently from how RubyGems
installs gem packages, and, unlike RubyGems, it doesn't provide a
public interface (CLI or programmatic) to guide the installation of a
single gem. We are presented with the options of either
reimplementing a considerable portion Bundler, or patch and use parts
of its internals; I choose the latter. Ideally, there would be a way
to install gems from git sources in a manner similar to how we drive
`gem` to install gem packages.
* When a bundled program is executed (via `bundle exec` or a
binstub that does `require 'bundler/setup'`), the setup process reads
the Gemfile.lock, activates the dependencies, re-serializes the lock
file it read earlier, and then attempts to overwrite the Gemfile.lock
if the contents aren't bit-identical. I think the reasoning is that
by merely running an application with a newer version of Bundler, you'll
automatically keep the Gemfile.lock up-to-date with any changes in the
format. Unfortunately, that doesn't play well with any form of
packaging, because bundler will immediately cause the application to
abort when it attempts to write to the read-only Gemfile.lock in the
store. We work around this by normalizing the Gemfile.lock with the
version of Bundler that we'll use at runtime before we copy it into
the store. This feels fragile, but it's the best we can do without
changes upstream, or resorting to more delicate hacks.
With all of the challenges in using Bundler, one might wonder why we
can't just cut Bundler out of the picture and use RubyGems. After all,
Nix provides most of the isolation that Bundler is used for anyway.
The problem, however, is that almost every Rails application calls
`Bundler::require` at startup (by way of the default project templates).
Because bundler will then, by default, `require` each gem listed in the
Gemfile, Rails applications are almost always written such that none of
the source files explicitly require their dependencies. That leaves us
with two options: support and use Bundler, or maintain massive patches
for every Rails application that we package.
Closes #8612
2015-11-15 02:17:29 +00:00
|
|
|
|
|
|
|
|
# write out metadata and binstubs
|
|
|
|
|
spec=$(echo $out/${ruby.gemPath}/specifications/*.gemspec)
|
|
|
|
|
ruby ${./gem-post-build.rb} "$spec"
|
|
|
|
|
''}
|
|
|
|
|
|
2018-10-29 00:48:05 +00:00
|
|
|
${lib.optionalString (!dontInstallManpages) ''
|
|
|
|
|
for section in {1..9}; do
|
|
|
|
|
mandir="$out/share/man/man$section"
|
|
|
|
|
find $out/lib \( -wholename "*/man/*.$section" -o -wholename "*/man/man$section/*.$section" \) \
|
|
|
|
|
-execdir mkdir -p $mandir \; -execdir cp '{}' $mandir \;
|
|
|
|
|
done
|
|
|
|
|
''}
|
|
|
|
|
|
ruby: new bundler infrastructure
This improves our Bundler integration (i.e. `bundlerEnv`).
Before describing the implementation differences, I'd like to point a
breaking change: buildRubyGem now expects `gemName` and `version` as
arguments, rather than a `name` attribute in the form of
"<gem-name>-<version>".
Now for the differences in implementation.
The previous implementation installed all gems at once in a single
derivation. This was made possible by using a set of monkey-patches to
prevent Bundler from downloading gems impurely, and to help Bundler
find and activate all required gems prior to installation. This had
several downsides:
* The patches were really hard to understand, and required subtle
interaction with the rest of the build environment.
* A single install failure would cause the entire derivation to fail.
The new implementation takes a different approach: we install gems into
separate derivations, and then present Bundler with a symlink forest
thereof. This has a couple benefits over the existing approach:
* Fewer patches are required, with less interplay with the rest of the
build environment.
* Changes to one gem no longer cause a rebuild of the entire dependency
graph.
* Builds take 20% less time (using gitlab as a reference).
It's unfortunate that we still have to muck with Bundler's internals,
though it's unavoidable with the way that Bundler is currently designed.
There are a number improvements that could be made in Bundler that would
simplify our packaging story:
* Bundler requires all installed gems reside within the same prefix
(GEM_HOME), unlike RubyGems which allows for multiple prefixes to
be specified through GEM_PATH. It would be ideal if Bundler allowed
for packages to be installed and sourced from multiple prefixes.
* Bundler installs git sources very differently from how RubyGems
installs gem packages, and, unlike RubyGems, it doesn't provide a
public interface (CLI or programmatic) to guide the installation of a
single gem. We are presented with the options of either
reimplementing a considerable portion Bundler, or patch and use parts
of its internals; I choose the latter. Ideally, there would be a way
to install gems from git sources in a manner similar to how we drive
`gem` to install gem packages.
* When a bundled program is executed (via `bundle exec` or a
binstub that does `require 'bundler/setup'`), the setup process reads
the Gemfile.lock, activates the dependencies, re-serializes the lock
file it read earlier, and then attempts to overwrite the Gemfile.lock
if the contents aren't bit-identical. I think the reasoning is that
by merely running an application with a newer version of Bundler, you'll
automatically keep the Gemfile.lock up-to-date with any changes in the
format. Unfortunately, that doesn't play well with any form of
packaging, because bundler will immediately cause the application to
abort when it attempts to write to the read-only Gemfile.lock in the
store. We work around this by normalizing the Gemfile.lock with the
version of Bundler that we'll use at runtime before we copy it into
the store. This feels fragile, but it's the best we can do without
changes upstream, or resorting to more delicate hacks.
With all of the challenges in using Bundler, one might wonder why we
can't just cut Bundler out of the picture and use RubyGems. After all,
Nix provides most of the isolation that Bundler is used for anyway.
The problem, however, is that almost every Rails application calls
`Bundler::require` at startup (by way of the default project templates).
Because bundler will then, by default, `require` each gem listed in the
Gemfile, Rails applications are almost always written such that none of
the source files explicitly require their dependencies. That leaves us
with two options: support and use Bundler, or maintain massive patches
for every Rails application that we package.
Closes #8612
2015-11-15 02:17:29 +00:00
|
|
|
runHook postInstall
|
|
|
|
|
'';
|
|
|
|
|
|
|
|
|
|
propagatedBuildInputs = gemPath ++ propagatedBuildInputs;
|
|
|
|
|
propagatedUserEnvPkgs = gemPath ++ propagatedUserEnvPkgs;
|
|
|
|
|
|
|
|
|
|
passthru = passthru // { isRubyGem = true; };
|
|
|
|
|
inherit meta;
|
|
|
|
|
})
|
|
|
|
|
|
|
|
|
|
)
|
